ftp上传失败的处理(ThehandlingofFTPuploadfailure)

2023年12月5日发(作者：富强作文)

-

ftp上传失败的处理（The handling of FTP upload failure）

FTP upload failed processing

The handling of FTP upload failure

1, unable to upload web pages, FTP fault - prompted "can not

connect rver" error.

The cau of the problem: FTP client program ttings, customer

line problems, FTP rver side problems.

Processing methods: it is recommended that the client u

CUTPFTP software to upload the customer's web page, in the "FTP

host address", it is best to fill in the IP address, if the

customer upload prompted socket error, plea check

Find out if one of the firewalls in the connection under the

edit menu of your software us the PASV mode, and if you choo,

you can cancel the option to connect to the host.

2, FTP has pasd authentication, but failed to list

directories or files, or always display the establishment of

data socket failure, the connection is rejected

The reason for the problem: you u the upload software FTP

client program should not u PASV Mode and Firewall Setting

notes: common FTP tool passive mode cancellation method

The error prompted is "data Socket error: connection timeout

list error""

Processing method: FlashFxp cancels the passive mode in the

toolbar site - Site Manager - the site to be cancelled - Option

- u passive mode - remove the hook CuteFtp in front of it and

cancel the passive mode

The site manager to cancel the site right button to lect the

attribute type data connection type using Port LeapFtp to

cancel the passive mode in toolbar

Site site manager - the site to be cancelled - Advanced - using

PASV mode - remove the hook in front of it.

3, prompt 426, Data, connection, clod?

Reason: this may be a firewall (or proxy) installed on your

network. The firewall (or agent) prohibits connections from

remote, 426 Data connection clod,

Transfer aborted shows that.

Processing: this time you can u passive transfer mode (PASV

mode) to avoid the restriction, data transmission.

Treatment methods: if you don't u PASV (i.e. not using passive

transmission) can download it, do not u the passive

transmission, becau active transmission than passive

transmission speed (the host station in active transport with

lective indeed

The TCP option (RFC2018) can effectively carry out packet loss

retransmission, and has the Timestamps option (RFC1323) to effectively determine the network delay and avoid

retransmission in advance

When the ur opens a lot of threads, there will be connection

errors.

4, browsing prompted Fatal error: Unable to read 989 bytes in

/www/urs// on

Line 5

Processing mode: Zend compiled files must be forced to u

binary mode when uploading.

5, prompted the connection can not find the host

First check whether the domain name had domain name resolution,

detection method: you can enter the Ping domain at the DOS

prompt if you can ping through it, you can in the FTP software

"FTP host address" fill in your name, if Ping doesn't work, then

you need to fill in your host in the FTP host address "the IP

address.

Processing methods: it is recommended to u IP address upload

page, while some areas of dial-up Internet access to 169

restrictions on FTP. So you'd better change the Internet and

test it again.

6, can not upload, prompt password is wrong

Plea check your login name and make sure the password is correct, becau if the password is copied, the space may be

duplicated. In addition, you need to e if the login type you

cho when landing in FTP is normal.

If you forgot the password, you can modify it in the "control

panel".

7, how do I know the total capacity of the files I uploaded to

the host?

The space occupancy can be checked through the disk space

management in the host control panel.

Note: click the "space occupancy map" refresh display, you can

get the latest space occupancy.

8 、 upload files more than my disk limit

The system prompts that you can't upload anything again (the

bytes are zero after uploading the files).

How to deal with it: tidy up space and retransmit it.

-