Is your TOC analyzer as good as your ultrapure water?
The Anatel A-1000 offers maximum nsitivity, low detection limits
and superior stability for ultrapure water TOC monitoring.
Total Organic Carbon Analysis Systems for Electronics Manufacturing
Modern ultrapure water systems demand TOC analyzers that provide the lowest detec-tion limits, most accurate results, maximum nsitivity to the smallest changes in water quality, and a measure of reliability that meets the most rigorous quality standards.The A-1000 is ideal for monitoring ultrapure water production and measuring the influent and effluent water at rin stations to ensure that cleaning is complete. You can also monitor hot and cold water to detect and report quickly even the most rapid TOC changes in the ultrapure water system.
The A-1000 offers detection limits from 0.05 to 1999 ppb TOC. This operating range ensures the correct operation of water systems in the miconductor and flat panel display industries. To give an idea of the level of nsitivity, consider that 1 cond over a
period of 32 years is an equivalent comparison to 1 ppb of carbon in solution.
The A-1000 family of TOC Analyzers includes all the features needed to monitor organic contamination in today’s most efficient
ultrapure water systems. Anatel’s TOC Analyzers eliminate guesswork in your process and offer total confidence in your operations.
KEY FEATURES
Patented stopped flow and photocatalytic oxidation: You are always sure of complete oxidation and the most accurate results Robust design offers superior reliability:Downtime is practically eliminated and you get the results you need.
Network nsors with ANET: Set instrument parameters and aquire data from as many as eight nsors with a single C80 controller–the most convenient control available Detection limits to 0.05 pp
b TOC: The
smallest changes in TOC concentration can be detected and reported so that you always know the current status or your water system Convenient rial, analog, and digital
interfacing: A complete array of data handling capability is included to allow you to mange your data effectively.
Portable TOC nsors: A-1000 nsors can be permanently installed or you can u the S20P portable model for spot-checks throughout the water system.
Model A-1000 S20P
Model A-1000 S10
PERFORMANCE SPECIFICATIONS
Automatic TOC Mode Operating Range:0.05 to 1999 ppb as carbon
Repeatability:±0.05 ppb < 5 ppb TOC, ±5% > 5 ppb TOC
Minimum Input Resistivity: 5.0 M-cm for all waters
1.0 M-cm for neutral waters
0.2 M-cm for water with C0
as sole conductive species
2
Ambient Operating Temperature:S10 Sensor: 5 °C to 40 °C (41 °F to 104 °F)
S20/S20P Sensor: 5 °C to 35 °C (41 °F to 95 °F)
Sample Water Temperature:0 °C to 100 °C (32 °F to 212 °F)
Inlet Pressure:100 psig maximum (690 kPa)
Display Resolution:0.00 to 19.99 ppb, 20.0 to 199.9 ppb, 200 to 1999 ppb Purge Mode Resistivity:0.01 to 18.20 M-cm
Conductivity:0.05 to 100 microsiemens/cm
Display Resolution:Three significant figures as resistivity
Four significant figures as conductivity
PHYSICAL SPECIFICATIONS
General Installation Category:II, IEC 1010
Pollution Degree:2, IEC 664
Anet Network Capacities Type:RS-485
Sensors:8 maximum
C80 Controllers:8 maximum (any configuration)
Network Length: 1 km (3,000 ft) maximum
Network Cabling:Shielded Twin-axial, Twist-Lock BNC
Display Main:1-line x 16-character Super-Twist LCD
Backlighting:Yellow LED
Character Height:0.163”
Physical Operating Temperature:0 °C to 35 °C (32 °F to 95 °F)
Relative Humidity:90% RH maximum
Altitude:4,000 m (13,125 ft) maximum
Size:330 L x 172 W x 112 mm D (13.0” x 6.8” x 4.4”)
Weight: 6.5 kg (12.75 lb)
Analysis Cell Volume:7.5 mL
Power:85 to 264 VAC ±10%, 50/60 Hz
Power Consumption: 2 Amps max. @ 120 VAC, 1 Amp max. @ 230 VAC
I/O Connections Analog:Opto-isolated 4-20 mA output
Non-isolated 12 VDC output @ 1/2 Amp max.
Digital I/O:Two opto-isolated inputs, Two opto-isolated outputs
Serial Interfaces:RS485 opto-isolated Network,
RS232 Data Acquisition, RS232 Printer, RS232 Diagnostics
AMERICAS • 481 California Avenue, Grants Pass, Oregon 97526 USA, Toll Free: 1 800 866 7889, Tel: 1 541 472 6500, Fax: 1 541 479 3057
EUROPE / ASIA • 6, route de Compois, C.P. 212, CH-1222 Vénaz, Geneva, Switzerland, Tel: 41 22 855 91 00, Fax: 41 22 855 91 99
WEB SITES • www.hachultra • www.anatel • bisphere • www.particle
Specifications are subject to change without notice. Lit. No. N106
