2023年3月3日发(作者：拜早年祝福语)[OK]
Ruijie#swi
Ruijie#switch v
Ruijie#switch co
Ruijie#switch convert v
Ruijie#switch convert d
Ruijie#switch convert do
Ruijie#switch convert ?
mode Convert switch mode
Ruijie#switch convert *Aug 4 14:36:15: %LLDP-4-CREATEREM: Port TenGigabitEthernet 1/1 created one new neighbor, Chassis ID is 33, Port ID is Te1/1.
*Aug 4 14:36:15: %LLDP-4-CREATEREM: Port TenGigabitEthernet 1/2 created one new neighbor, Chassis ID is 33, Port ID is Te1/2.
*Aug 4 14:36:16: %LINK-3-UPDOWN: Interface TenGigabitEthernet 1/1, changed state to up.
*Aug 4 14:36:16: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet 1/1, changed state to up.
*Aug 4 14:36:16: %LINK-3-UPDOWN: Interface TenGigabitEthernet 1/2, changed state to up.
*Aug 4 14:36:16: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet 1/2, changed state to up.
Ruijie#write
Ruijie#swi
Ruijie#switch v
Ruijie#switch vi
Ruijie#switch con
Ruijie#switch convert d
Ruijie#switch convert do
Ruijie#switch convert ?
mode Convert switch mode
Ruijie#switch convert m
Ruijie#switch convert mode v
Ruijie#switch convert mode virtual
Convert switch mode will automatically backup the "" file and then delete it, and reload the switch. Do you want to convert switch to virtual mode? [no/yes]y
Do you want to recover "" from "virtual_" (press 'ctrl + c' to cancel) [yes/no]:*Aug 4 14:36:49: %LINK-3-UPDOWN: Interface TenGigabitEthernet 1/2, changed state to down.
*Aug 4 14:36:49: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet 1/2, changed state to down.
*Aug 4 14:36:49: %LINK-3-UPDOWN: Interface TenGigabitEthernet 1/1, changed state to down.
*Aug 4 14:36:49: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet 1/1, changed state to down.
y
System bootstrap ...
Nor Flash ID: 0x017E1000, SIZE: 8388608Bytes
Press Ctrl+B to enter Boot Menu .....
Load Ctrl Program ...
Executing program, launch at: 0x00010000
Load Ctrl Program ...
Self decompressing the image :
################################################################################################################################################################################################################################################################################################ [OK]
Ctrl Version: RGOS 10.4(3b16)p2 Relea(178747)
MTD_DRIVER-5-MTD_NAND_FOUND: 1 NAND chips(chip size : 134217728) detected
MTD_DRIVER-5-MTD_NAND_FOUND: 1 nand chip(s) found on the target.
Press Ctrl+C to enter Ctrl ......
Load program file: [flash:/]
[OK]
Executing program, launch at: 0x01800000
MTD_DRIVER-5-MTD_NAND_FOUND: 1 NAND chips(chip size : 134217728) detected
MTD_DRIVER-5-MTD_NAND_FOUND: 1 nand chip(s) found on the target.
Self decompressing the image:
#####################################################################################################
############################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################# [OK]
Self decompressing the image succeed and will jump to 0x00010000...
Ruijie General Operating System Software
Relea Software (tm), RGOS 10.4(3b16)p2 Relea(178747), Compiled Mon Sep 29 14:18:07 CST 2014 by ngcf67
Copyright (c) 1998-2014s by Ruijie Networks.
All Rights Rerved.
Neither Decompiling Nor Rever Engineering Shall Be Allowed.
*Aug 4 14:38:36: %MTD_DRIVER-5-MTD_NAND_FOUND: 1 NAND chips(chip size : 134217728) detected
*Aug 4 14:38:36: %MTD_DRIVER-5-MTD_NAND_FOUND: 1 nand chip(s) found on the target.
*Aug 4 14:39:03: %MODULE-6-INSTALL: Install Module M5000E-02XS in slot 1.
*Aug 4 14:39:03: %MODULE-6-INSTALL: Install Module M5000E-02XS in slot 2.
*Aug 4 14:39:41: %VSU-4-VSL_PORT_LACK: VSL-AP [1/2] is lack of member ports.
*Aug 4 14:39:41: %VSU-5-DTM_TOPO_INIT: Topology INIT completed.
*Aug 4 14:39:43: %VSU-4-VSL_PORT_PHY_CHG: The physical state of VSL
member port [TenGigabitEthernet 1/1/2] changed to UP.
*Aug 4 14:39:43: %VSU-4-VSL_PORT_PHY_CHG: The physical state of VSL member port [TenGigabitEthernet 1/1/1] changed to UP.
*Aug 4 14:39:43: %VSU-5-DTM_VSL_PORT_STATE_CHG: The protocol state of VSL member port [TenGigabitEthernet 1/1/1] changed to UP.
*Aug 4 14:39:43: %VSU-5-DTM_VSL_AP_STATE_CHG: VSL-AP [1/1] changed state to UP.
*Aug 4 14:39:43: %VSU-5-DTM_NODE_JOIN: Node (33) joined the topology.
*Aug 4 14:39:43: %VSU-5-DTM_VSL_PORT_STATE_CHG: The protocol state of VSL member port [TenGigabitEthernet 1/1/2] changed to UP.
*Aug 4 14:39:43: %VSU-5-DTM_VSL_AP_BW: Bandwidth of VSL-AP [1/1] changed from [10000] to [20000].
*Aug 4 14:41:23: %VSU-5-DTM_TOPO_CVG: Node discovery done. Topology converged.
*Aug 4 14:41:23: %VSU-4-CHAIN_CNN: VSU topology is in chain connection.
*Aug 4 14:41:38: %DEVICE-5-CHANGED: Device[2] S5750-48GT/4SFP-P is Join.
*Aug 4 14:41:40: %MODULE-6-INSTALL: Install Module M5000E-02XS in slot 2/1.
*Aug 4 14:41:40: %MODULE-6-INSTALL: Install Module M5000E-02XS in slot 2/2.
*Aug 4 14:41:40: %DEVICE-5-CHANGED: Module M5000E-02XS in slot 2/1 is UP.
*Aug 4 14:41:40: %DEVICE-5-CHANGED: Module M5000E-02XS in slot 2/2 is UP.
*Aug 4 14:41:41: %DEVICE-5-CHANGED: Device[2] S5750-48GT/4SFP-P is Up.
*Aug 4 14:41:44: %POWER-5-PLUG_IN: Power in slot [2/1] been plugin.
*Aug 4 14:41:44: %POWER-5-STATUS_RECOVER: Power[M5000E-AC500P] in slot [2/1] change to LinkAndPower status.
*Aug 4 14:41:44: %POWER-5-PLUG_IN: Power in slot [2/2] been plugin.
*Aug 4 14:41:44: %POWER-5-STATUS_RECOVER: Power[M5000E-AC500P] in slot [2/2] change to LinkAndPower status.
*Aug 4 14:41:49: %POE-6-POWERSUPPLY: The supply power of device 1 changed from 0 to 740.
*Aug 4 14:41:49: %POE-6-POWERSUPPLY: The supply power of device 2 changed from 0 to 740.
*Aug 4 14:41:50: %POWER-5-PLUG_IN: Power in slot [1/1] been plugin.
*Aug 4 14:41:51: %POWER-5-STATUS_RECOVER: Power[M5000E-AC500P] in slot [1/1] change to LinkAndPower status.
*Aug 4 14:41:51: %POWER-5-PLUG_IN: Power in slot [1/2] been plugin.
*Aug 4 14:41:51: %POWER-5-STATUS_RECOVER: Power[M5000E-AC500P] in slot [1/2] change to LinkAndPower status.
*Aug 4 14:41:52: %REDUNDANCY-6-INITIALIZING: Initialize as master Supervisor.
*Aug 4 14:41:52: %REDUNDANCY-6-STM_ON_MASTER: State Machine start up on master Supervisor.
*Aug 4 14:41:52: %REDUNDANCY-6-PEER_DETECTED: Peer Supervisor has been detected.
*Aug 4 14:41:52: %RDND-7-ROLE_CHANGE_EVENT: Notify my role [Master] peer role [Backup].
*Aug 4 14:41:58: %GRTD-6-RUN_MINIMAL: Slot 2/0: Running minimal boot-up diagnostic...
*Aug 4 14:41:58: %GRTD-6-DIAG_OK: Slot 2/0: Pasd boot-up diagnostic.
*Aug 4 14:42:07: %REDUNDANCY-6-PKTP_START: Communication with the peer Supervisor has been established, PKTP module started.
*Aug 4 14:42:13: %SYS-6-CLOCKUPDATE: (*2) System clock has been updated to 14:42:13 UTC Thu Aug 4 2016.
*Aug 4 14:42:18: %GRTD-6-RUN_MINIMAL: mb
oard: Running minimal boot-up diagnostic...
*Aug 4 14:42:20: %GRTD-6-DIAG_OK: mboard: Pasd boot-up diagn
Ruijie>*Aug 4 14:42:20: %REDUNDANCY-6-COMPATIBLE_MODE: The master and slave Supervisor engines are compatible. Enter Active/Standby Hot mode.
*Aug 4 14:42:20: %REDUNDANCY-6-CHKPNT_CON_SUCCESS: The checkpoint connection with peer Supervisor has been successfully established.
*Aug 4 14:42:20: %REDUNDANCY-6-BATCHSYNC_START: BatchSync started.
*Aug 4 14:42:20: %NETGR-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:20: %NETGR-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:20: %RDND_SSP-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:20: %RDND_SSP-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:20: %L2INTF-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:20: %L2INTF-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:20: %QINQ-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:20: %QINQ-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:20: %RDND_PVLAN-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:20: %RDND_PVLAN-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:20: %RDND_GVRP-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:20: %RDND_GVRP-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:20: %RDND_EID_VVLAN-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:20: %RDND_EID_VVLAN-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:20: %LACP-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:20: %LACP-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:20: %INTF_FAST-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:20: %INTF_FAST-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:20: %REUP-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:20: %REUP-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:20: %ERPS-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:20: %ERPS-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:20: %TPP_HA-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:20: %TPP_HA-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:20: %MSTP_HA-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:20: %MSTP_HA-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:20: %RLDP_HA-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:20: %RLDP_HA-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:20: %MCAST-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:20: %MCAST-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:20: %DOT1X-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:20: %DOT1X-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:20: %DOT1X-6-HA_FAILED: Rdnd syn data to standby FAILED.
*Aug 4 14:42:20: %ARP-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:20: %ARP-6-BATCHSYNC_END: Event BATCHSYNC has
handled.
*Aug 4 14:42:20: %ANTI_ARPCHEAT-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:20: %ANTI_ARPCHEAT-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:20: %ND-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:20: %ND-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:20: %ATND-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:20: %ATND-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:20: %IPV6_RDND-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:20: %IPV6_RDND-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:20: %NET-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:20: %NET-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:20: %DAD-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:20: %DAD-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:20: %RDND_PARAMETER-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:20: %REDUNDANCY-6-COMPATIBLE_MODE: (*2) The master and slave Supervisor engines are compatible. Enter Active/Standby Hot mode.
*Aug 4 14:42:21: %NSM-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:21: %NSM-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:21: %RDND_MISC-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:21: %RDND_MISC-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:21: %LINE-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:21: %LINE-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:21: %RDND_SYSLOG-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:21: %RDND_SYSLOG-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:21: %RDND_CLI-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:21: %RDND_CLI-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:21: %SSH-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:21: %SSH-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:21: %RDND_RMON-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:21: %RDND_RMON-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:21: %RDND_IPFIX_STUB-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:21: %RDND_IPFIX_STUB-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:21: %BFD-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:21: %BFD-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:21: %RDND_EID_DHCP_SNP-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:21: %RDND_EID_DHCP_SNP-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:21: %RDND_EID_DHCP6_SNP-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:21: %RDND_EID_DHCP6_SNP-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:21: %RDND_EID_DHCP6_RELAY-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:21: %RDND_EID_DHCP6_RELAY-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:21: %RDND_EID_DHCPD-6-BATCHSYNC_RCVD: Event BATCHS
YNC received.
*Aug 4 14:42:21: %RDND_EID_DHCPD-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:21: %RDND_SCC_STUB-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:21: %RDND_SCC_STUB-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:21: %DLDP-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:21: %DLDP-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:21: %LLDP-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:21: %LLDP-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:21: %RDND_EID_MVLAN-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:21: %RDND_EID_MVLAN-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:21: %RDND_EID_AAA-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:21: %RDND_EID_AAA-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:21: %RDND_EID_RDS-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:21: %RDND_EID_RDS-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:21: %RDND_EID_GSN-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:21: %RDND_EID_GSN-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:21: %WEBAUTH-6-BATCHSYNC_RCVD: Event BATCHSYNC received.
*Aug 4 14:42:21: %WEBAUTH-6-BATCHSYNC_END: Event BATCHSYNC has handled.
*Aug 4 14:42:24: %LINK-3-UPDOWN: Interface TenGigabitEthernet 1/1/1, changed state to up.
*Aug 4 14:42:24: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet 1/1/1, changed state to up.
*Aug 4 14:42:24: %LINK-3-UPDOWN: Interface TenGigabitEthernet 1/1/2, changed state to up.
*Aug 4 14:42:24: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet 1/1/2, changed state to up.
*Aug 4 14:42:24: %LINK-3-UPDOWN: (*2) Interface TenGigabitEthernet 1/1/1, changed state to up.
*Aug 4 14:42:24: %LINEPROTO-5-UPDOWN: (*2) Line protocol on Interface TenGigabitEthernet 1/1/1, changed state to up.
*Aug 4 14:42:24: %LINK-3-UPDOWN: (*2) Interface TenGigabitEthernet 1/1/2, changed state to up.
*Aug 4 14:42:24: %LINEPROTO-5-UPDOWN: (*2) Line protocol on Interface TenGigabitEthernet 1/1/2, changed state to up.
*Aug 4 14:42:26: %LINK-3-UPDOWN: Interface GigabitEthernet 1/0/3, changed state to up.
*Aug 4 14:42:26: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet 1/0/3, changed state to up.
*Aug 4 14:42:26: %LINK-3-UPDOWN: Interface GigabitEthernet 1/0/6, changed state to up.
*Aug 4 14:42:26: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet 1/0/6, changed state to up.
*Aug 4 14:42:26: %LINK-3-UPDOWN: Interface TenGigabitEthernet 2/1/1, changed state to up.
*Aug 4 14:42:26: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet 2/1/1, changed state to up.
*Aug 4 14:42:26: %LINK-3-UPDOWN: Interface GigabitEthernet 1/0/4, changed state to up.
*Aug 4 14:42:26: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet 1/0/4, changed state to up.
*Aug 4 14:42:26: %LINK-3-UPDOWN:
EDUNDANCY-6-BATCHSYNC_SUCCESS: (*2) BatchSync succeeded.
*Aug 4 14:42:28: %REDUNDANCY-6-SUPERVISOR_CHG_STATE: (*2) Supervisor changed state to StandBy Hot.
*Aug 4 14:42:28: %REDUNDANCY-6-HEARTBEAT_START: (*2) HeartBeat started.
*Aug 4 14:42:29: %LINK-3-UPDOWN: Interface GigabitEthernet 2/0/8, changed state to up.
*Aug 4 14:42:29: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet 2/0/8, changed state to up.
*Aug 4 14:42:29: %LINK-3-UPDOWN: Interface GigabitEthernet 2/0/7, changed state to up.
*Aug 4 14:42:29: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet 2/0/7, changed state to up.
*Aug 4 14:42:29: %LINK-3-UPDOWN: Interface GigabitEthernet 2/0/10, changed state to up.
*Aug 4 14:42:29: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet 2/0/10, changed state to up.
*Aug 4 14:42:29: %LINK-3-UPDOWN: Interface GigabitEthernet 2/0/6, changed state to up.
*Aug 4 14:42:29: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet 2/0/6, changed state to up.
*Aug 4 14:42:29: %LINK-3-UPDOWN: Interface GigabitEthernet 2/0/11, changed state to up.
*Aug 4 14:42:29: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet 2/0/11, changed state to up.
*Aug 4 14:42:29: %LINK-3-UPDOWN: Interface GigabitEthernet 2/0/9, changed state to up.
*Aug 4 14:42:29: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet 2/0/9, changed state to up.
*Aug 4 14:42:29: %LINK-3-UPDOWN: (*2) Interface GigabitEthernet 2/0/8, changed state to up.
*Aug 4 14:42:29: %LINEPROTO-5-UPDOWN: (*2) Line protocol on Interface GigabitEthernet 2/0/8, changed state to up.
*Aug 4 14:42:29: %LINK-3-UPDOWN: (*2) Interface GigabitEthernet 2/0/7, changed state to up.
*Aug 4 14:42:29: %LINEPROTO-5-UPDOWN: (*2) Line protocol on Interface GigabitEthernet 2/0/7, changed state to up.
*Aug 4 14:42:29: %LINK-3-UPDOWN: (*2) Interface GigabitEthernet 2/0/10, changed state to up.
*Aug 4 14:42:29: %LINEPROTO-5-UPDOWN: (*2) Line protocol on Interface GigabitEthernet 2/0/10, changed state to up.
*Aug 4 14:42:29: %LINK-3-UPDOWN: (*2) Interface GigabitEthernet 2/0/6, changed state to up.
*Aug 4 14:42:29: %LINEPROTO-5-UPDOWN: (*2) Line protocol on Interface GigabitEthernet 2/0/6, changed state to up.
*Aug 4 14:42:29: %LINK-3-UPDOWN: (*2) Interface GigabitEthernet 2/0/11, changed state to up.
*Aug 4 14:42:29: %LINEPROTO-5-UPDOWN: (*2) Line protocol on Interface GigabitEthernet 2/0/11, changed state to up.
*Aug 4 14:42:29: %LINK-3-UPDOWN: (*2) Interface GigabitEthernet 2/0/9, changed state to up.
*Aug 4 14:42:29: %LINEPROTO-5-UPDOWN: (*2) Line protocol on Interface GigabitEthernet 2/0/9, changed state to up.
Ruijie>en
Ruijie#hous
Ruijie#ho
Ruijie#con
Ruijie#configure
Enter configuration commands, one per line. End with CNTL/Z.
[Help cmd] [Example] [Prented inf] [Config mode]
-------------- ------------ --------------------- ------------------------
function+help
omplete command.
HN-D12D13-S5750-Ruijie-24U(config)#interface g
HN-D12D13-S5750-Ruijie-24U(config)#vlan 1905
HN-D12D13-S5750-Ruijie-24U(config-vlan)#ex
HN-D12D13-S5750-Ruijie-24U(config-vlan)#exit
HN-D12D13-S5750-Ruijie-24U(config)#int
HN-D12D13-S5750-Ruijie-24U(config)#interface g
HN-D12D13-S5750-Ruijie-24U(config)#interface gigabitEthernet 2/0/6
HN-D12D13-S5750-Ruijie-24U(config-if-GigabitEthernet 2/0/6)#sw
HN-D12D13-S5750-Ruijie-24U(config-if-GigabitEthernet 2/0/6)#switchport a
HN-D12D13-S5750-Ruijie-24U(config-if-GigabitEthernet 2/0/6)#switchport access vl
HN-D12D13-S5750-Ruijie-24U(config-if-GigabitEthernet 2/0/6)#switchport access vlan 1905
HN-D12D13-S5750-Ruijie-24U(config-if-GigabitEthernet 2/0/6)#ex
HN-D12D13-S5750-Ruijie-24U(config-if-GigabitEthernet 2/0/6)#ex
HN-D12D13-S5750-Ruijie-24U(config)#int
HN-D12D13-S5750-Ruijie-24U(config)#interface g
HN-D12D13-S5750-Ruijie-24U(config)#interface range g
HN-D12D13-S5750-Ruijie-24U(config)#interface range gigabitEthernet 2/0/6-11
HN-D12D13-S5750-Ruijie-24U(config-if-range)#a
HN-D12D13-S5750-Ruijie-24U(config-if-range)#acc
HN-D12D13-S5750-Ruijie-24U(config-if-range)#exi
HN-D12D13-S5750-Ruijie-24U(config-if-range)#exit
HN-D12D13-S5750-Ruijie-24U(config)#int
HN-D12D13-S5750-Ruijie-24U(config)#interface range gigabitEthernet 2/0/6-11
HN-D12D13-S5750-Ruijie-24U(config-if-range)#sw
HN-D12D13-S5750-Ruijie-24U(config-if-range)#switchport ac
HN-D12D13-S5750-Ruijie-24U(config-if-range)#switchport access v
HN-D12D13-S5750-Ruijie-24U(config-if-range)#switchport access vlan 1905
HN-D12D13-S5750-Ruijie-24U(config-if-range)#ex
HN-D12D13-S5750-Ruijie-24U(config-if-range)#ex
HN-D12D13-S5750-Ruijie-24U(config)#int
HN-D12D13-S5750-Ruijie-24U(config)#interface g
HN-D12D13-S5750-Ruijie-24U(config)#interfacer
HN-D12D13-S5750-Ruijie-24U(config)#interface ra
HN-D12D13-S5750-Ruijie-24U(config)#interface range g
HN-D12D13-S5750-Ruijie-24U(config)#interface range gigabitEthernet 1/0/3-4
HN-D12D13-S5750-Ruijie-24U(config-if-range)#sw
HN-D12D13-S5750-Ruijie-24U(config-if-range)#switchport ac
HN-D12D13-S5750-Ruijie-24U(config-if-range)#switchport access vl
HN-D12D13-S5750-Ruijie-24U(config-if-range)#switchport access vlan 1905
HN-D12D13-S5750-Ruijie-24U(config-if-range)#exi
HN-D12D13-S5750-Ruijie-24U(config-if-range)#exit
HN-D12D13-S5750-Ruijie-24U(config)#in
HN-D12D13-S5750-Ruijie-24U(config)#int
HN-D12D13-S5750-Ruijie-24U(config)#interface ra
HN-D12D13-S5750-Ruijie-24U(config)#interface range g
HN-D12D13-S5750-Ruijie-24U(config)#interface range gigabitEthernet 1/0/6-7
HN-D12D13-S5750-Ruijie-24U(config-if-range)#sw
HN-D12D13-S5750-Ruijie-24U(config-if-range)#switchport a
HN-D12D13-S5750-Ruijie-24U(config-if-range)#switchport access vl
HN-D12D13-S5750-Ruijie-24U(config-if-range)#switchport access vlan 1905
HN-D12D13-S5750-Ruijie-24U(config-if-range)#exi
HN-D12D13-S5750-Ruijie-24U(config-if-range)#exit
HN-D12D13-S5750-Ruijie-2
ig-if-GigabitEthernet 2/0/9)#DE
HN-D12D13-S5750-Ruijie-24U(config-if-GigabitEthernet 2/0/9)#DES
HN-D12D13-S5750-Ruijie-24U(config-if-GigabitEthernet 2/0/9)#DEScription To_D05_RH5885_22-25U_SLOT6-1
HN-D12D13-S5750-Ruijie-24U(config-if-GigabitEthernet 2/0/9)#EX
HN-D12D13-S5750-Ruijie-24U(config-if-GigabitEthernet 2/0/9)#EXI
HN-D12D13-S5750-Ruijie-24U(config-if-GigabitEthernet 2/0/9)#EXIt
HN-D12D13-S5750-Ruijie-24U(config)#INT
HN-D12D13-S5750-Ruijie-24U(config)#INTerface G
HN-D12D13-S5750-Ruijie-24U(config)#INTerface GigabitEthernet 2/0/11
HN-D12D13-S5750-Ruijie-24U(config-if-GigabitEthernet 2/0/11)#DES
HN-D12D13-S5750-Ruijie-24U(config-if-GigabitEthernet 2/0/11)#DEScription To_D05_RH5885_11-15U_SLOT6-1
HN-D12D13-S5750-Ruijie-24U(config-if-GigabitEthernet 2/0/11)#EXI
HN-D12D13-S5750-Ruijie-24U(config-if-GigabitEthernet 2/0/11)#EXIt
HN-D12D13-S5750-Ruijie-24U(config)#INT
HN-D12D13-S5750-Ruijie-24U(config)#INTerface G
HN-D12D13-S5750-Ruijie-24U(config)#INTerface GigabitEthernet 1/0/3
HN-D12D13-S5750-Ruijie-24U(config-if-GigabitEthernet 1/0/3)#DES
HN-D12D13-S5750-Ruijie-24U(config-if-GigabitEthernet 1/0/3)#DEScription To_D04_RH5885_17-20U_SLOT6-2
HN-D12D13-S5750-Ruijie-24U(config-if-GigabitEthernet 1/0/3)#EXI
HN-D12D13-S5750-Ruijie-24U(config-if-GigabitEthernet 1/0/3)#EXIt
HN-D12D13-S5750-Ruijie-24U(config)#INT
HN-D12D13-S5750-Ruijie-24U(config)#INTerface G
HN-D12D13-S5750-Ruijie-24U(config)#INTerface GigabitEthernet 1/0/4
HN-D12D13-S5750-Ruijie-24U(config-if-GigabitEthernet 1/0/4)#DES
HN-D12D13-S5750-Ruijie-24U(config-if-GigabitEthernet 1/0/4)#DEScription
% Incomplete command.
HN-D12D13-S5750-Ruijie-24U(config-if-GigabitEthernet 1/0/4)#DEScription To_D04_RH5885_11-15U_SLOT6-2
HN-D12D13-S5750-Ruijie-24U(config-if-GigabitEthernet 1/0/4)#EXI
HN-D12D13-S5750-Ruijie-24U(config-if-GigabitEthernet 1/0/4)#EXIt
HN-D12D13-S5750-Ruijie-24U(config)#INT
HN-D12D13-S5750-Ruijie-24U(config)#INTerface G
HN-D12D13-S5750-Ruijie-24U(config)#INTerface GigabitEthernet 1/0/6
HN-D12D13-S5750-Ruijie-24U(config-if-GigabitEthernet 1/0/6)#DES
HN-D12D13-S5750-Ruijie-24U(config-if-GigabitEthernet 1/0/6)#DEScription To_D05_RH5885_17-20U_SLOT6-2
HN-D12D13-S5750-Ruijie-24U(config-if-GigabitEthernet 1/0/6)#EXI
HN-D12D13-S5750-Ruijie-24U(config-if-GigabitEthernet 1/0/6)#EXIt INT
HN-D12D13-S5750-Ruijie-24U(config-if-GigabitEthernet 1/0/6)#EXIt
HN-D12D13-S5750-Ruijie-24U(config)#IN
HN-D12D13-S5750-Ruijie-24U(config)#INT
HN-D12D13-S5750-Ruijie-24U(config)#INTerface G
HN-D12D13-S5750-Ruijie-24U(config)#INTerface GigabitEthernet 1/0/7
HN-D12D13-S5750-Ruijie-24U(config-if-GigabitEthernet 1/0/7)#DES
HN-D12D13-S5750-Ruijie-24U(config-if-GigabitEthernet 1/0/7)#DEScription To_D05_RH5885_11-15U_SLOT6-2
HN-D12D13-S5750-Ruijie-24U(config-if-GigabitEthernet 1/0/7)#EXI
HN-D12D13-S5750-Ruijie-24U(config-if-GigabitEthernet 1/0/7)#EXIt
HN-D12D13-S5750-Ruijie-24U(config)#EXI
HN-D12D13-S5750-Ruijie-24U(config)#EXIt
HN-D12D13-S5750-Ruijie-24U#*Aug
