Defect Classification

更新时间:2023-05-06 23:59:30 阅读：评论：0

A. Defect Classification

DEFECT DESCRIPTION	CRITICAL	MAJOR	MINOR
1. Shipment Packaging
2. Selling Packaging
Accessible sharp point or edge that may injure the ur / purchar	*
Blood stain	*
Foreign substance	refer to Foreign Substance Table
Deformed unit packaging material		*	*
Irritating smell		*
Loo fastening or aling		*	*
Loo packing, insufficient stuffing or fixing inside lling packaging		*	*
Missing / Incomplete component		*
The information on lling packaging does not match actual product		*
Torn / Damaged / Wet unit packaging material		*
Unstable / Asymmetric lling packing that will fail to display		*
3. Labeling, Marking, Printing
Missing / Wrong / Incomplete label or statement of warning / safety marking	*
Missing required marking such as UL, ETL etc.	*
Missing country of origin marking if required	*
Missing Importer / distributor name and address within destination country if required	*
Color variation of printing within one unit or unit to unit		*	*
Label curled, poor adhesion of label		*	*
Label peeled off		*
Missing, incomplete or wrong marking / label / hangtag / instruction sheet / manual		*
Poor / unclear printing on labeling or unit packaging material		*	*
Scratched label / printing		*	*
Statement cannot meet destination country language requirement, such as English plus French required for Canada shipment, German required for Germany shipment		*
Poor printing of barcode			*
4. Material
4.1 Plastic
Color deviation		*
Deformation, warpage, twist		*
Flow mark		*	*
Gate flash or flash at pull pin / push pin		*	*
Short shot		*	*
Shrinkage		*	*
Unclear molding text / logo		*
Uneven hardness of side wall of rotation molding product		*	*
Uneven thickness		*
Weld line		*	*
White mark, white texture		*	*
Adhered soft flash			*
Color molding			*
Embedded dirt, mold in dirt			*
4.2 Metal
Flash, spur	*	*
Improper edge folding cau to sharp edge expod	*
Abrasion mark		*	*
Crack / Broken		*
Deformation, dent, bump		*	*
Double punching		*
Poor polishing		*	*
Press mark		*	*
Rough surface		*	*
Rust, Oxidation		*
Sand hole		*	*
Short shot		*	*
Tarnish		*	*
Unnecessary grea stain			*
4.3 Wood, wicker, rattan, and so on
Splinter	*	*
Unwanted hole or knot affecting product structure and integrity, related to safety	*
Bent / warped / twisted parts		*
Cloud stain on wood lacquering		*	*
Crack		*
Damage		*
Dead knot		*
Finger mark		*	*
Live knot on main display panel		*
Obvious color variation due to poor matching		*
Poor pattern etching		*	*
Rough surface		*	*
Sawing mark		*	*
Unwanted hole		*
Wrong design of pattern		*
Chipped mark			*
Live knot on hidden panel			*
4.4 Porcelain, pottery and resin
Crack / damage		*
Deformation		*
Dim golden decorating		*
Folded / slant color film for logo burning		*
Missing glaze		*
Obvious size / color / shape deviation within one unit or unit to unit		*
Pin hole, bubble		*	*
Poor applying / burning of decorative film		*
Poor connection of components, such as slant handle, shift position of decoration part		*
Poor glazing, incomplete glazing, flow glazing		*	*
Serious hand painting error, such as wrong pattern, incomplete pattern, bad effect		*
Unstable, wobble		*	*
Attached clay block			*
Black dot			*
Burn mark			*
Chipped mark			*
Impurity embedded in glaze layer			*
Parting line			*
Sand surface			*
4.5 Paper
Color deviation, e.g. yellowish white against bleach white		*
Deformed cardboard box		*
Detached lamination of cardboard		*	*
Double printing		*
Fold mark		*	*
High humidity of paper		*
Illegible printing		*	*
Missing gloss on card surface		*
Obvious gloss difference on card surface		*
Obvious hand feel difference on paper / cardboard thickness or hardness		*
Poor trimming / cutting		*	*
Press mark		*	*
Printing out of register		*	*
Slant printing		*	*
Wrinkle		*	*
Wrong order of pages within one book		*
Wrong printing		*
Frayed edge, rough edge			*
4.6 Glass
Sharp point / edge	*
High-low step at joint edge of two plates	*	*
Broken / Crack		*
Bubble		*	*
Chipped mark		*	*
Flow mark		*	*
Poor / Uneven / Over / Under painting		*	*
Poor pattern etching		*	*
Poor transparence		*	*
Uneven thickness		*	*
Embedded dirt, Impurity embedded			*
4.7 Fabric
Burnt mark at the end of fur or at the edge of plush fabric		*	*
Color shading difference within one unit		*
Hand feel difference		*
Holes		*
Neps / pills on fabric surface		*	*
Pleated mark		*	*
Rever face and bottom side of fabric		*
Skewed / bowed / biad / deformed fabric		*	*
Yarn run		*	*
Coar yarn			*
Frayed edge of fabric or binding			*
4.8 Leather
Belly / marbled / discolored grain		*	*
Glue / hammer / pencil mark / button mark / hanger mark		*	*
Grain break / peeling / wrinkle / cracks		*	*
Missing silica gel pack		*
Scratch / surgery / brand / burnt / paint / cut mark		*	*
Pin hole			*
5. Appearance
5.1 General
Blood stain	*
Expod live part in electrical product	*
Foreign substance	refer to Foreign Substance Table
Hazardous finger entrapment	*
Unwanted sharp point or edge	*
Color variation		*	*
Crack / Damage / Chip		*	*
Different shape		*
Dirt / Stain / Oil		*	*
Irritating smell		*
Missing / Detached component		*
Rough surface		*	*
Scratch / Dent / Cut mark		*	*
Velcro loo		*	*
5.2 Coating
Bubble on electroplating layer		*	*
Coating layer peeled off		*	*
Color deviation		*
Flow mark		*	*
Painting faded out		*	*
Pitted surface		*	*
Poor / Incomplete / Illegible silkscreen printing		*	*
Poor coating / painting / spraying / printing / powder coating		*	*
Slant printing		*	*
Uneven / Over / Under coating		*	*
Yellow stain on electroplating surface		*	*
Color stain, double printing, scratched printing etc.			*
6. Asmbly
6.1 General
Loo strain relief	*
Cannot completely asmble		*
Difficult to asmble		*	*
Gap at joint		*	*
Improper alignment of parts at joint		*
Improper bonding		*	*
Loo connection		*	*
Mismatch of CKD (unasmbled) components at size, jointing position, predrilled hole etc.		*
Open heat aling		*
Part A (e.g. battery, bullet) cannot fit part B (e.g. battery ca, pistol)		*
Poor ultrasonic welding, such as loo connection, melt mark, burned mark etc.		*	*
Slant		*	*
Wobbling		*	*
Excessive glue			*
6.2 Riveting, screwing and nailing
Expod nail end	*
Sharp edge of rivet cap	*
Incomplete rivet		*
Loo rivet		*	*
Protruded screw end / head		*	*
Screw mounting over tighten		*
Slant rivet		*
Slipped screw		*
6.3 Welding
Crack on welding solder	*	*
Unwanted sharp point at welding position	*
Fal welding		*
Loo welding		*
Poor workmanship of welding such as inconsistent welding, jumping welding, uncured welding		*	*
Unnecessary solder attached		*	*
Welding with pits / splatter		*	*
6.4 Stitching and embroidery
Needle is detected	*
A line of needle hole		*	*
Asymmetric stitching		*
Broken embroidery		*	*
Crooked stitches / am		*	*
Embroidery artwork not as specified		*
Expod under ply am		*	*
Frayed edge		*	*
Improper stitch tension (too loo or too tight)		*	*
Incorrect stitch density		*	*
Incorrect thread size		*	*
Misplacement of embroidery		*
Missing embroidery		*
Needle cutting		*
Open am		*
Pleat		*	*
Poor stitch quality of embroidery		*	*
Puckering		*	*
Skipped / Dropped / Broken stitching		*	*
Snarled / messy stitches		*	*
Spar stitches		*	*
Uneven stitching density		*	*
Excessive stitches			*
Expod blind stitches			*
Incure am end finishing			*
6.5 Weaving
Expod nail end	*
Cracked / damaged wicker / rattan		*
Deformation		*	*
End of wicker / rattan can not be hidden properly		*	*
Missing / Over / Under clear lacquering		*	*
Obvious color variation		*
Unstable structure		*	*
Wet painting		*
Wrong design		*
7. Function
Intermittent function		*
Malfunction		*
No intended function, such as light, flash, sound, move etc.		*
Noi		*
Non-smooth operation		*	*
The moving component cannot move or difficult to move		*
Velcro no function		*	*
Voice output too loud / weak		*
8. Accessory
Accessory cannot fit main part		*
Accessory do not comply to parts list		*
Accessory color or design or size cannot match main part		*
Missing accessory		*

本文发布于:2023-05-06 23:59:30，感谢您对本站的认可！

本文链接：https://www.wtabcd.cn/fanwen/fan/90/98603.html

上一篇：乔布斯演讲励志演讲Speech in Stanfor

下一篇：HPE包装指南_12-external-construction-01-03-01

标签：

留言与评论（共有 0 条评论）