Medicinal bottles made of moulded soda lime glass.
[Appearance] Apply an appropriate quantity to obrve bottle under a natural light. It should be colorless transparent or brown transparent; the surface should be clean and smooth and without obviously defects; any cracks are not allowed.
[Identification] Linear Thermal Expansion: (7.6~9.0)×10-6K-1(20~300℃). It meets the requirements of the dadvertimentsetermination of mean linear thermal expansion﹤YBB00202003-2015﹥or the determination of linear thermal expansion﹤YBB00212003-2015﹥.
[Joint Line] : not more than 0.3mm on bottles mouth; not more than 0.5mm on other parts.
[Hydrolytic Resistance of Grains at 121℃]: level 2. It meets the requirements of glass-hydrolytic resistance of glass grains at 121-test method and classification﹤YBB00252003-2015﹥.
[Hgrandeurydrolytic Resistance of the Interior Surfaces]: level HC3. It meets the requirements of glass-hydrolytic resistance of the interior surfaces at 121-test method and classification﹤Y
BB00242003-2015﹥.
[Thermal Shock]: should not be broken after thermal shock test on 42℃. It meets the requirements of the first method of the determination of thermal shock and thermal shock strength﹤YBB00182003-2015﹥.
[Internal Stress]: Optical Path Difference (OPD) is not more than 40mm/mm. It meets the requirements of the determination of internal stress﹤YBB00162003-2015﹥.
[Leaching Content of As, Sb, Pb, Cd]: As is not more than 0.2mg/L; Sb is not more than 0.7mg/L; Pb is not more than 1.0mg/L; Cd is not more than 0.25mg/L. It meets the requirements of the determination of the leaching content of As, Sb, Pb, Cd﹤YBB00372004-2015﹥.
[Vertical Axis Deviation] Should conform to the specifications in Table 1. It meets the requirements of the determination of the vertical axis deviation﹤YBB00192003-2015﹥.
Tab 1 The maximum allowed value of Vertical Axis Deviation
Specification (ml) | ≤100 | 120~350 | 400~950 | 1000 |
Vertical Axis Deviation amax (mm) | 1.5 | 2.0 | 2.5 | 3.2 |
| 家鸽 | | | |
[Full Capacity] Weigh the empty bottles and fill with water bottles, and weigh again, weight difference of empty bottles and fill with water bottles is full capacity (1g/Room Temperature≈1ml). Big mouth bottles should conform to the specifications in Table 2 and small mouth bottles should conform to the specifications in Table 3.
Tab 2 The Capacitance Deviation of big mouth bottles Units: ml
Specification | Full Capacity | Deviation | Specification | Full Capacity | Deviation |
10 | 13 | ±3 | 250 | 285 | ±11 |
20 | 23 | 300 | 335 |
30 | 35 | ±4 | 350 maybe是什么意思 | 385 |
40 | 45 | 400 | 成都郫县卫校招生435 | ±12 |
50 | 55 | ±5 | 泰戈尔 世界上最遥远的距离450 | 485 |
60 | 65 | 四级写作500 | 535 |
80 | 90 | ±7 | 550 | 600 | ±13 |
100 | 110 | 600 | 650 |
120 | 130 | 中华人民共和国民事诉讼法650 | 700 |
140 | 160 | ±9 | 750 | 800 | ±15 |
170 | 190 | 850 | 900 |
200 | 220 | 950 | 1000 |
| | | | | |
Tab 2 The Capacitance Deviation of big mouth bottles Units: ml
Specification | Full Capacity | Deviation | Specification | Full Capacity | Deviation |
25 | 30 | ±3 | 200 | 240 | ±11 |
50 | venty60 | 艾薇儿婚礼歌曲±5 | 500 | 600 | ±13 |
100 | 120 | ±7 | 1000 | 1200 | ±15 |
| | | | | |
