shorts⏹Production Surface Class 成品表面等級
ancii
Class 1 Surface: Visible on a constant, daily basis. This includes, but is not limited to, the top and front of a electronic product.
1級面：可經常見到的面，包括電子產品的頂面和正面，但不限於此。
芝加哥大学
Class 2 Surface: Visible occasionally, as the sides of a unit.
2級面：可偶爾看到的面，如零部件的兩個側面。
Class 3 Surface: Visible during normal customer maintenance, such as the back and bottom of unit.
3級面 : 客戶在正常維修時才可見到的面，例如部件的背面和底部。
visit的过去分词Class 4 Surface: Not normally visible. This encompass all other surfaces which are not Class 1, Class 2 or Class 3.
4級面 ：正常情況下不可見，即除1,2,3級面外的所有表面。
⏹Molded Plastic 成型塑件
Blush: Discoloration or change in gloss, usually at gate areas or where wall thickness changes.
異色： 顔色或光澤變異，通常位于澆口附近或壁厚差異之處。
Bubbles: Transparent parts or void pockets (may appear as a blister or bulge on colored parts).
decay
氣泡：透明部分或真空的泡囊（彩色零件上可能像凸包或凸起）。
Burns: Brown marks, spots or streaks (usually associated with poor venting of gass during molding).
燒傷：褐色的斑塊，斑點或條塊（通常與排氣口排氣不良有關）。
Cold Slug: First material to enter the mold during injection. The solid or mi-solid material leaves a border with the adjacent material and weakens the bond between the two materials.
冷料：注射時首批進入模腔的原料。固狀或半固狀原料與相鄰材料閒留下的邊界，造成兩種材料閒的連接削弱。
Contamination: Discoloration from foreign material or foreign material embedded in the surface.
髒污：外來物所致的變色或嵌入零件表面的異物。
Cracking: Splitting or fissures causing paration of the material.
裂縫：材料分裂所致的破裂或裂縫。
Crazing: Tiny cracks due to stress exerted on the part.
龜裂法国菜：零件表面應力造成的細小裂紋。
Delamination: Peeling of the layers of plastic.
起鱗：塑膠分層所至的剝離現象。
Discoloration: Inconsistent color or any deviation from the color standard.
變色：色彩不一致或與標準色有差異。
Drag Marks: Scratches from the plastic scraping against the mold when ejected.
拉模：零件射出時與模具摩擦產生的刮傷。
Flow Marks: Wavy or streaked appearance of a surface.
流痕：表面呈現的波紋或條紋。
Flash: Excessive plastic along the parting line or mating surface of the mold.
毛邊：在模具的分型線和合模面上的溢料。
Gas Marks: Burn marks or dark discolored streaks caud by incomplete venting of the gass trapped in the mold.
焦痕：由於模具的排氣不良造成的燒傷或黑的變色條紋。indivi
Gouge: Surface imperfection due to abrasion, nicking or damage.
溝槽：零件的外表面有磨損、缺口或損傷。
Grea: Machine lubrication on the part.
油脂：在零件表面有機器的潤滑油。
Haze: Cloudiness of a transparent part.
霧狀：透明件上的雲霧現象。
Marbling: Colored streaks due to incomplete mixing of color.
大理石紋：顔料混合不均造成的彩色斑紋。
Nicks: Surface imperfection due to damage.
缺口：因損傷造成的表面缺陷。
Particles: Small discolored spots or matter embedded in transparent material.
雜點：在透明材料中的小污點。
Pin Push: Distortion or protrusion caud by ejector pin pushing into part more than normal.
頂白：頂針在成型頂出時把塑膠零件頂傷或頂變形。
Pitting: Crater-like imperfections in the material.
凹坑：材料里彈坑狀缺陷。
Porosity: Holes or voids in the material.
縮松：材料内部形成孔洞。
Protrusion: Raid area on a surface, such as a blister or bump.
突起：表面的突起區域，像水泡或凸塊。
Pulling: Part distortion caud from plastic catching in the mold.
拉傷：塑件卡在模具内造成的零件變形。
Scratch: Surface imperfection due to abrasion.
劃傷：由磨損引起的表面缺陷。
Shine: Glossy or shiny areas on textured surfaces (usually caud by worn or
damaged areas in the mold).
亮斑：在咬花表面有光亮的區域（通常是由於模具内部損傷引起）。
over the rainbow 原唱
Shorts: Missing material due to incomplete filling of the mold.
不飽模：模具内塑料未完整填充造成的短料。
Sink: Surface depression caud by non-uniform material solidification and shrinkage.
縮水：由於材料凝固和收縮不均造成的表面變形。
Specks: Small discolored spots or matter embedded in the material.
斑點中餐西餐差异英语作文：微小的褪色斑點或嵌入零件的雜質。
Splay: Off-colored streaking (often silver-like) caud by moisture in the material or thermal degradation of the resin during processing.
銀紋：由於原料中有水份或樹脂分解而形成的脫色條紋（通常為銀色）。
Weldlines: Appears as a line where two or more fronts of molten plastic converge (also called knitlines or flowlines).
熔接線：兩股或多股熔體前沿相遇形成的接綫（也叫結合線或流線）。
Witness Lines: A visible line formed by the junction of two pieces of steel in the mold.
合模線：模具的兩個模面接合處形成的線條。
⏹Sheet Metal 金屬板件
Abrasion: A scuffed or rubbed surface imperfection characterized by its large width and
length relative to its depth.
英语改错题擦傷：: 拖傷或摩擦造成的表面缺陷，其長寬尺寸相對與厚度很大。
Arcing Marks: Marks in the part caud by the part coming into contact with the plating tank.
電弧痕：由於接觸到電鍍池引起的零件痕跡。
Brush Finish: Electro-galvanized material brushed to provide a consistent finish.
刷面：為使表面一致而塗刷鍍鋅材料。
Burr: Ragged and usually sharp protrusions on edges or holes (defined as a
percentage of material thickness and protrusion height).
毛刺：有划傷力，通常在邊沿或孔上呈凸起狀。（按照材料厚度和凸起高度定義）
