无源可靠性标准简介1209-1221

更新时间:2023-07-20 18:52:20 阅读: 评论:0

无源器件可靠性标准简介
1209
Temperature-Humidity Aging Test
Temperature
75 ± 2
Humidity
90 ± 2 % RH
erg
Test Duration
7 days(168 hours)
Vibration Test
Amplitude
1.52mm
Frequency
20-55Hz
Test Duration
3 axes (20 minutes/ axis) for 1 hour
Impact Test
Condition
rationality
500g, nominal 1 ms, half Sine pul
Times
3 axes, 2 impacts/direction (12 impacts total)
Temperature Cycling Test
Temperature
-40 to 70
Test Duration
10 cycles; Dwell time:30minutes; Ramp rate: 1/min
Temperature-Humidity Cycling Test
Temperature
-40±2℃ to 85±2℃
Humidity
At 23, maintain a relative humidity: 85% RH;                                            At 85, maintain a relative humidity: 20% RH;
Between 23 to 85℃, maintain a nominal linear change in relative humidity;
Between 10 to 23, maintain a relative humidity of 85% RH;
Below 10, humidity is uncontrolled.
Test duration
中文在线翻译日文42 cycles
Water immersion Test
Water temperature
43±2℃
Water PH value
5.5±0.5
Test Duration
7 days(168 hours)
Coated Fiber Side Pull Test
Load weight
0.51 lb.
Test Duration
5 c/dir,2dir
Coated Fiber Retention Test
Load weight
1 lb
Test Duration
5 c
                            1221
7.1 Impact Test
槐荫教育网
Number of Shocks
5 times per direction for 6 direction (on 3 axes)
Shock level
500G
Duration
1ms
7.2 Variable Frequency Vibration Test
Acceleration
20G      (1.52 mm double amplitude, P-P)
Frequency
20-2000Hz
Duration
4 min per cycle and 4 cycles per axis
7.3  Thermal Shock Test
Temperature range
△T=100 oC (0belcher oC to 100 oC) Liquid-to-liquid 
Dwell time
>=5 minutes at temperature extremes 
Transfer time
<=10 conds
Number of cycles
15
7.4  High Temperature Storage Test(Dry Heat)
商圈英文
Temperature
85 oC (±2 oC )
Humidity
<40%RH
Test duration
2000hrs
Measurement
168-, 500-, 1000-, 2000- hours interval
Down time measurement at room temperaturelegendary
7.5  High Temperature Storage Test (Damp Heat)
Temperature
85 oC (±2 oC )
Humidity
85% (±5%) RH
Test  duration
2000hrs
Measurement
100-, 168-, 500-, 1000-, 2000- hours interval
Down time measurement at room temperature
7.6 Low Temperature Storage Test
Temperature
-40 oC (±5 oC )
Humidity
Uncontrolled
Test duration
2000hrs
Measurement
168-, 500-, 1000-, 2000- hours interval
Down time measurement at room temperature
7.7 Temperature Cycling Test
婊子英文
Temperature
-40成都雅思暑期班 oC to +85 oC ( ± 2 oC)
Dwell time at extremes
≥15 minutes
Transition rate
Approximately 1℃/ minutes
Duration
500 cycles
伊丽莎白美容
7.8  Cyclic Moisture Resistance Test
13Temperature Profile:
Refer to figure A
Temperature & Humidity
85-95%RH at 75 oC & uncontrolled otherwi 
Dwell time at extremes
12 hrs
Number of cycles
  5 complete cycles(each complete cycle has 5 sub-cycles)

本文发布于:2023-07-20 18:52:20,感谢您对本站的认可!

本文链接:https://www.wtabcd.cn/fanwen/fan/90/183492.html

版权声明:本站内容均来自互联网,仅供演示用,请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系,我们将在24小时内删除。

标签:简介   暑期班   标准
相关文章
留言与评论(共有 0 条评论)
   
验证码:
Copyright ©2019-2022 Comsenz Inc.Powered by © 专利检索| 网站地图