进口压力容器
产品制造质量监督检验大纲
Supervisory Inspection Outline For Safety Performance
of The Pressure Vesl Products Imported
一、总则
sconeChapter 1 General Provisions
1、为保证进口压力容器产品制造质量监督检验质量，制订本大纲。
1 This outline is formulated in order to ensure effective supervisory inspection of the pressure vesl products imported
2、与进口压力容器产品制造质量监督检验有关各方及人员，均应遵守本大纲。
2 This outline is applicable to whom relevant to the supervisory inspection for safety performance of the pressure vesl products imported
二、依据
Chapter 2 Supervisory Inspection Basis
1、中华人民共和国国务院令第373号《特种设备安全监察条例》；
1 Special Equipment Safety Supervision Regulation（Promulgated by Decree No. 373 of the State Council of the People's Republic of China）
2、中华人民共和国国家质量监督检验检疫总局令第22号《锅炉压力容器制造监督管理办法》；
2 Supervision Administration Regulation for Manufacture Licensing of Boiler and Pressure Vesl.（Promulgated by Decree No. 22 of General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China）
3、《压力容器安全技术监察规程》；
3 Supervision Regulation on the Safety Technology for Pressure Vesl. （Promulgated by Safety Supervision Department of General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China）
4、《锅炉压力容器产品安全性能监督检验规则》。
4 Supervisory Inspection Rule for Safety Performance of Boiler and Pressure Vesl Products. （Promulgated by Safety Supervision Department of General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China）
三、监督检验内容
Chapter 3 Contents of Supervisory Inspection
1、对压力容器制造过程中涉及安全性能的项目进行监督检验；
1. Supervisory inspecting the items related to the safety performance of the product during pressure vesl manufacturing.
2、对受检企业压力容器制造质量体系运转情况进行监督检查。
2. Supervisory examining the implementation of the quality system of the supervid manufacturer.
四、监检项目和方法
Chapter 4 Items and Methods of Supervisory Inspection
1、图样资料
1. Drawing and data
（1）检查压力容器设计单位的设计资格印章，确认资格有效。
(1) Examine the certificate of pressure vesl designer, confirm the effectiveness of its qualification.artificialintelligence
（2）审查压力容器制造和检验标准的有效性。
(2) Review the effectiveness of standards on manufacture and inspection for pressure vesl.
（3）审查设计变更（含材料代用）手续。
(3) Review the approval formalities for design change (including material substitution).
2、材料
2. Materials
（1）审查材料质量证明书、材料复检报告。
(1) Check material certificate and material re-test report.
（2）检查材料标记移植。
(2) Check the transplantation of material identification.
（3）审查主要受压元件材料的选用和材料代用手续。
(3) Check the lection and formalities of substitute materials for main pressure parts.
（4）根据ASME某些材料的特殊要求，确认焊接、热处理、加工工艺及检验工艺的正确性。
germany
(4)Confirm the conformity of welding procedure, heat-treatment, processing procedure and inspection procedure with the special requirements of according some material to ASME code.复旦附中官网
3、焊接
3. Welding
（1）审查焊接工艺评定及记录，确认产品施焊所采用的焊接工艺符合相关标准、规范。(1) Check the welding procedure qualification and their records, verify that the welding technology ud in product production is in accordance with the relevant standards and codes. （2）确认焊接试板数量及制作方法。
(2) Confirm the number and manufacturing method of the welding test plate.
（3）审查产品焊接试板性能报告，确认试验结果。
(3) Check the property test report of the product welding test plates and confirm the test results. （4）检查焊工钢印。
(4) Check identification steel stamps of welders and welding operators.
（5）审查焊缝返修的审批手续和返修工艺。
(5) Check formalities and procedures for welding repair.
（5）审查焊缝返修的审批手续和返修工艺。
4、外观和几何尺寸
4. Visual and dimensional examination
（1）检查焊接接头表面质量。
imax是什么意思(1) Examine the appearance of welded joints.
（2）检查母材表面的机械损伤情况。
(2) Check the mechanical damage on the surface of ba metal.
（3）检查筒体内径与最小内径差，当直立容器壳体长度超过30m时，检查筒体直线度。检查焊缝布置和封头形状偏差，并记录实际尺寸。
kamala harris(3) Check the difference between maximum and minimum diameters of shell. Check the straightness of the cylinder of vertical vesl with height more than 30 meters, Check the arrangement of welds and the deviation of figure in head and record their actual dimensions.
5、无损检测
5. Non-destructive examination
（1）检查布片（排版）图和探伤报告，核实探伤比例和位置，对局部探伤产品的返修焊缝，应检查扩探情况。对超声波探伤和表面探伤，除审查报告外，监检人员还应不定期到现场对产品进行实地监检。
(1) Check x-ray film arrangement map and NDE report. Verify the proportion and position of NDE. For the spot-NDE pressure vesl, check the extension RT for the repaired welds. As for the UT or surface flaw detection, the supervisory inspector should conduct random on-site supervisory inspection in addition checking the report.
（2）抽查底片。抽查数量不少于设备探伤比例的30%，且不少于10张（少于10张的全部检查），检查部位应包括T形焊缝可疑部位及返修片。
(2) Check the x-ray films. The number of the x-ray films being checked should not be less than 30 percent of the whole and should not less than 10 films (including the x-ray films at T-joint, doubtful area and at the repaired area).
6、热处理
6. Heat treatment
检查确认热处理记录曲线和热处理工艺的一致性。
outlet是什么意思Check and confirm the correspondence between heat treatment curve and actual heat treatment parameter and procedure.
7、耐压试验
7. Pressure test
耐压试验前，应确认需监检的项目均监检合格，受压企业应完成的各项工作均有见证。耐压试验时，监检人员必须亲临现场，检查试验装置、仪表及准备工作，确认试验结果。Before pressure test, confirm that all required items have pasd the supervisory inspection and the supervid manufacturer has kept the testimony of the whole-completed work. During pressure test, the supervisory inspector shall check the test equipment, instruments, preparation work for testing and verify the test results on the site.
8、安全附件
8. Safety appurtenance
检查安全附件数量、规格、型号及产品合格证应当符合要求。
The number, specifications, types and certificates of compliance of safety appurtenances should meet the requirements.
9、气密性试验
9. Leak test
检查气密性的试验结果，应当符合有关规范、标准及设计图样的要求。
Check the leak test result to assure that it meets to the requirements of concerned code, standards, and design drawing.
10、出厂技术资料
10. Delivery technical data
（1）审查出厂技术资料。
(1) Check the technical data to be delivered.
（2）检查铭牌内容应符合有关规定，在铭牌上打监检钢印。
(2) Check the nameplate if the contents on it are in accordance with the relevant requirements, if
so, stamp the supervisory inspection steel al on the product's name plate.
11、监检资料
11. Supervisory inspection data
经监检合格的产品，监检人员应当根据《压力容器产品安全性能监督检验项目表》的要求及时汇总、审核见证资料，并由监检单位出具《监检证书》。
Once the product has pasd the supervisory inspection, the supervisory inspector should summarize and verify the testifying paper in time according to the Supervisory Inspection Items for Safety Performance of Pressure Vesl Products and issue the Supervisory Inspection Certificate.
五、监检程序
Chapter 5 Supervisory Inspection Procedure
1、受检企业资质、质量体系、人员资格及生产能力确认，内容包括：
1. The certificate, quality management system, personnel qualification and production capability
of the supervid manufacturer should be confirmed, which include:
（1）、审查受检企业制造许可证，确认其有效性；
(1) (2) (3) (4) (5) (6) (1) Examine the certificate of pressure vesl manufacturer; confirm the effectiveness of its qualification.
（2）、审查受检企业的质量体系文件（包括质量手册、程序文件、管理制度、各责任人员的任免文件、质量信息反馈资料等）是否符合要求；
什么事英语
Review the Documents on quality system (including quality manual, procedures, management rules, documents on appointment and dismiss of responsible persons, and quality information feedback data), Confirm that the Documents on quality system meet the requirements of corresponding codes.
（3）、审查从事锅炉压力容器焊接的持证焊工的持证项目、有效期等是否符合要求；
Check the qualified items, terms of validity of the qualified welders. The qualified items, terms of validity of the qualified welders engaged in the welding of pressure vesl products should meet the requirements of corresponding codes.
（4）、审查从事锅炉压力容器质量检验的人员及从事无损检测人员的持证项目、级别、有效期等是否符合要求；
Check the qualified items, qualified level and terms of validity of the list of staff engaged in non-destructive examination and quality inspection. Their qualified items, qualified level and terms of validity should meet the requirements of corresponding codes.
（5）、审查压力容器的设计资料，工艺文件，制造、检验控制程序，以及焊接工艺评定一览表等；
Review the pressure vesl design data, manufacture procedure documents, manufacture and inspection control procedure, as well as the list of welding procedure qualifications.
（6）、查看并确认受检企业的生产能力。
Check and verify the production capability of the supervid manufacturer.
2、按《监检项目表》（见附件）的内容实施监检工作。
2. Supervisory inspection should be implemented according to the contents of Supervisory
Inspection Items(Appendix 1).
（1）、压力容器产品监检项目分A 类和B 类。对A 类项目，监检员必须到场进行监检，并在受检企业提供的相应的见证文件（检验报告、记录表、卡等，下同）上签字确认；未经监检确认，不得流转至下一道工序。对B 类项目，监检员应到场进行监检，如不能到场监检，可在受检企业自检后，对受检企业提供的相应见证文件进行审查并签字确认。
The Supervisory Inspection Items of pressure vesl products are classified into Category A and Category B.
For the items of Category A, the supervisory inspector must conduct supervisory inspection on the site and should sign on the related testifying documents provided by the supervid manufacturer (including inspection report, recording forms and cards; similarly hereinafter). If the item has not been verified via supervisory inspection, the product cannot be transferred to the next working process.
For the items of Category B, The supervisory inspector must conduct supervisory inspection on the site. If the supervisor inspection is not on the site, he(or she) should check and sign on the related testifying documents provided by the supervid manufacturer to validate the lf-inspection of the manufacturer.
（2）、受检单位企业发生质量体系运转和产品安全性能违反有关规定的一般问题时，监检员应当向受检企业发出《锅炉压力容器产品安全性能监督检验工作联络单》；发生违反有关规定的严重问题时，监检单位应当向受检企业签发《锅炉压力容器安全性能监督检验意见通知书》，并报告国家质检总局安全监察机构。
(2) When the supervid manufacturer makes such general mistakes of the implementation of its quality system or the safety performance of its products against the related rules, the inspector should give out the Work Liaison Sheet of Safety Performance Supervisory Inspection of Boiler and Pressure Vesl Products to the supervid manufacturer. If the mistakes are rious, the supervisory inspection agency should give out the Notice on Safety Performance Supervisory Inspection of Boiler and Pressure Vesl Products to the supervid manufacturer. Besides, the supervisory inspection agency should report to Safety Supervision Department of General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China (AQSIQ).
一致英文3、总体验收，出具报告：对产品进行总体验收。经监检合格的产品，监检人员根据《压力容器产品安全性能监督检验项目表》的要求及时汇总、审核见证资料，由监检单位出具《压力容器产品安全性能监督检验证书》，并在产品铭牌上打监检钢印。
在线翻译google
3. Combined Supervisory Inspection of the supervid products. Once the product has pasd the supervisory inspection, the supervisory inspector should summarize and verify the testifying paper in time according to the Supervisory Inspection Items for Safety Performance of Pressure Vesl Products, issue the Supervisory Inspection Certificate, and stamp the supervisory inspection steel al on each product's name plate.
