使用手册TRIMECH TECHNOLOGY PRIVATE LIMITED CHERUSAL MODEL: TM-101PR-MKIII PULSE HEATED MACHINE脉冲式热压机（设有旋转台）
Machine t up 设备设置
Powering up 启动程序
Do not power up the system in quick succession to allow for adequate discharge of all components. Typically, wait 20 conds.
Place both 9” monitor onto the control compartment and connect up all plug sockets. Mount camera asmbly onto machine and plug into front panel. Connect up the power and compresd air supply. Before power ON the machine, check that the emergency switch is unlatch.
Upon power ON, system will display as per follow:
Read the manual before attempting to operate the system. The system has a friendly ur interface which in most ca, ur would be able to navigate fairly easily without much coaching.
请在20秒后才启动设备。
请把两台9寸的监视器放置在控制隔间，然后在把所有的插座连接起来。接着，将视像设备与操作键盘连接，跟着启动电源和压缩空气的供应。在启动设备之前，请确保紧急开关已拉开。
设备启动后，触控式屏幕将会显示以下的讯息：2013专四
请在详细阅读使用手册后才进行设备的装置。此系统拥有简易的程式设定。
Functions keys 功能键
garden
The interface panel u a touch screen for inputs of instructions. Lightly touch on the function of interest to start programming.
Key - U this key to forward to the next pagekdt
使用右键跳到下一页
Key - U this key to return to previous pagereunion
使用左键返回前一页
ENT U this key (ENTER) to accept newly keyed in data.5 6岁幼儿年龄特点
使用ENT输入键将参数和资料输入系统
EXT U this key (EXIT) to exit from a page and return to the main menu.
使用EXT输入键离开页面和回返主页
Input panel
郑州培训
Emergency Switch紧急开关
深圳游乐场事故
- In the event of an emergency, pressing this switch stops all function. This allows the ur to rectify the problem or fault before continuing. Switch off the machine before rectifying the fault. Switch the machine back on to resume.
有紧急状况时，按下这个开关能停止所有的功能。请在处理问题前将设备关上。待问题排除后，将设备重新启动，即可恢复正常运作。
Left/Right Start switches左/右启动开关
- The left right buttons must both be presd simultaneously for the machine to begin the process.
左右启动开关必须同时压下，设备才能进行生产。
Vacuum Switch真空源开关
如何锻炼口才
– To activate the vacuum. This option can be deactivate at production pret menu.
真空源开关可提供治具真空吸附功能。此功能可在生产模式页面取消。
垃圾桶用英文怎么说
Vacuum on/off valve 真空源开关阀
– To control vacuum to fixture A and fixture B.
可控制A, B治具真空吸附功能
Control Panel 操作键盘
Down stroke speed control 热压头下压速度控制旋钮 Throttle speed of press cylinder. Air cushion is factory t. 控制气压缸进出气的控制旋钮
Down stroke pressure 热压头下压压力表
Indicate down stroke pressure in BAR. Resolution is 0.01 BAR. Gauge is factory calibrated.
显示热压头下压的压力。解析度为0.01 Bar 。 测量仪已经过校正
Touch Screen LCD 触控式屏幕 Input panel for programming. 用于参数和资料输入
Pul indicator 脉冲加热指示灯
Indicating lamp for pulsing of thermode. It indicate status of firing. 脉冲加热指示灯可显示热压头是否以脉冲方式加温
医学英语Pul on/off switch 脉冲加热开关 Switch for power transformer. 电源变压器开关
