bios设置（BIOS tup）
Graphical tutorials for BIOS ttings
Article source: little garden Author: CJM
BIOS (basic input / output system) is a t of programs that are solidified in the computer CMOS RAM chip, providing the first and most direct hardware control for the computer. There are two main types of BIOS: AWARD BIOS and AMI BIOS. Correct tting of BIOS can greatly improve system performance.
Part one, AWARD BIOS ttings
First, enter the BIOS ttings
The computer just started and appeared like the 1 picture below.
Figure 1
When the picture 1 appears, press the Delete (or Del) key and don't let go until you enter the BIOS (basic input / output system) ttings, as shown in Figure 2
Figure 2 (main menu)
开除英文This is the main menu t by AWARD BIOS. The first line marked type Setup program is Award Software. There is a triangular arrow in front of the item that contains the submenu. There are 13 items on the main menu
czech taxi
spicedStandard CMOS Features (standard CMOS function ttings)
Set date, time, specifications of hard disk and type of display.暮光之城男主
Advanced BIOS Features (advanced BIOS function ttings)
五山校区
The advanced features of the system are t.
Advanced Chipt Features (Advanced chipt function ttings)
Setting the parameters of the chipt ud by the motherboard.
playbasketball
Integrated Peripherals (external device tting)
Make the tup menu include all peripheral ttings. If the sound card, Modem, USB keyboard is op
中考英语作文范文
<
Power Management Setup (power management ttings)
Set CPU, hard disk, display and other equipment power-saving function operation mode.
acressoPNP/PCI Configurations (plug and play /PCI parameter tting)
Set the PnP ISA plug and play interface and the parameters of the PCI interface, which is only valid when your system supports PnP/PCI.
Frequency/Voltage Control (frequency / voltage control)
Set the CPU frequency multiplication, t whether automatic detection of CPU frequency, etc..
Load Fail-Safe Defaults (loading the most cure default values)
U this menu to load factory defaults as a stable system.
Load Optimized Defaults (loading high performance default values)
U this menu to load the best performance, but it may affect the stable default values.
Set Supervisor Password (t super ur password)
U this menu to t the password for the super ur.
Set Ur Password (t ur password)
U this menu to t ur password.
Save & Exit Setup (exit after saving)
Save the changes to CMOS, and then exit the Setup program.
Exit Without Saving (quit without saving)
Give up the modification to CMOS, and then exit the Setup program.
Two, AWARD BIOS ttings of the operation method
In any ca, the direction key to move to the left, and "need to operate the project
Select this option by pressing the "Enter" key
According to the "Esc" button from the menu back on a menu or jump to the Exit menu
Add numeric value or change lection according to "+" or "PU" key
天气的英文
Press the "-" or "PD" key to reduce the value or change the lection
According to the "F1" key theme help, only in the status display menu and lect the ttings menu effective
Press the "F5" key to restore the previous CMOS tting from CMOS, only in the lection menu
According to the "F6" key, the CMOS value is loaded from the default value table of the fault protection, which is valid only when the tting menu is lected
Press the "F7" key to load to optimize default values
Press the "10" key to save the changed CMOS tting and exit
Operation method: on the main menu, lect the items to be operated with the direction key, and then enter the submenu by pressing the "Enter" enter key, and lect the items to be
2014年12月英语四级operated with the direction key in the submenu,
Then press "Enter" to enter into the sub item, u the direction keys after completion, after confirmation and press the Enter key, finally save changes according to the "F10" key after the CMOS ttings and exit (or press "Esc" key to return to the previous menu, return to the main menu lect "Save & Exit Setup" enter, enter "Y" and then enter, namely to save changes to BIOS and exit the Setup program in the pop-up window in the confirmation.
Three, Standard CMOS Features (standard CMOS function t) item submenu
In the main menu, lect the "Standard CMOS Features" entry with the direction key, and then enter the carriage, then enter the "Standard CMOS Features" submenu, as shown in Figure 3
There are 13 sub items in the submenu of "Standard CMOS Features"
Date (mm:dd:yy) (date tting)
Set the date in the computer. The format is "week, month / day / year"". The week is defined by BIOS, read-only.
Time (hh:mm:ss) (time tting)
Set the time in the computer, the format is "time / minute / c"".
