Commission communication in the framework of the implementation of Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for u within certain voltage limits
(Text with EEA relevance)
(Publication of titles and references of harmonid standards under the directive)
(2010/C 71/02)
ESO (1)Reference and title of the harmonid standard
(and reference document)Reference of superded
standard
Date of cessation
of presumption of conformity
of superded standard
Note 1
Cenelec EN 41003:1998
Particular safety requirements for equipment to be connected to telecom
munication networks EN 41003:1996
Note 2.1
Date expired
(1.1.2002)
迷信的意思Cenelec EN 41003:2008
Particular safety requirements for equipment to be connected to telecom
munication networks and/or a cable distribution system EN 41003:1998
Note 2.1
1.7.2011
Cenelec EN 50063:1989
Safety requirements for the construction and the installation of equip
ment for resistance welding and allied process
Cenelec EN 50065-4-2:2001
Signalling on low-voltage electrical installations in the frequency range
3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz -- Part 4-2: Low voltage
decoupling filters - Safety requirements
EN 50065-4-2:2001/A1:2003Note 3Date expired
(1.12.2005)
EN 50065-4-2:2001/A2:2005Note 3Date expired
(1.3.2008) Cenelec EN 50065-4-7:2005
Signalling on low-voltage electrical installations in the frequency range
3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz -- Part 4-7: Portable low
voltage decoupling filters - Safety requirements
Cenelec EN 50085-1:1997
Cable trunking systems and cable ducting systems for electrical installa
tions -- Part 1: General requirements
Cenelec EN 50085-1:2005
Cable trunking systems and cable ducting systems for electrical installa
tions -- Part 1: General requirements EN 50085-1:1997
Note 2.1
Date expired
(1.7.1999)
Cenelec EN 50085-2-1:2006
Cable trunking systems and cable ducting systems for electrical installa
tions -- Part 2-1: Cable trunking systems and cable ducting systems
intended for mounting on walls and ceilings
Cenelec EN 50085-2-2:2008
Cable trunking systems and cable ducting systems for electrical installa
tions -- Part 2-2: Particular requirements for cable trunking systems and
cable ducting systems intended for mounting underfloor, flushfloor, or
onfloor
Cenelec EN 50085-2-3:1999
Cable trunking systems and cable ducting systems for electrical installa
tions -- Part 2-3: Particular requirements for slotted cable trunking sys
tems intended for installation in cabinets
Cenelec EN 50085-2-4:2009
Cable trunking systems and cable ducting systems for electrical installa
tions -- Part 2-4: Particular requirements for rvice poles and rvice
posts
Cenelec EN 50086-1:1993
Conduit systems for cable management -- Part 1: General requirements
ESO(1)Reference and title of the harmonid standard
(and reference document)Reference of superded
standard
of presumption of conformity
of superded standard
Note1
Cenelec EN 50086-2-4:1994
Conduit systems for cable management -- Part 2-4: Particular require
ments for conduit systems buried underground
EN 50086-2-4:1994/A1:2001Note 3Date expired
(1.8.2003) Cenelec EN 50090-2-2:1996会计原则
Home and Building Electronic Systems (HBES) -- Part 2-2: System over
view - General technical requirements
EN 50090-2-2:1996/A1:2002Note 3Date expired
(1.8.2004)
EN 50090-2-2:1996/A2:2007Note 3 1.11.2011
Cenelec EN 50106:1997
Safety of houhold and similar electrical appliances - Particular rules for
routine tests referring to appliances under the scope of EN 60335-1 and
EN 60967HD 289 S1:1990
+ A1:1992
Note 2.1
Date expired
(1.4.1999)
EN 50106:1997/A1:1998Note 3Date expired
(1.7.1999) EN 50106:1997/A2:2001Note 3Date expired
(1.8.2003)
Cenelec EN 50106:2008
Safety of houhold and similar electrical appliances - Particular rules for
routine tests referring to appliances under the scope of EN 60335-1
EN 50106:1997
and its amendments
Note 2.1
1.6.2011
Cenelec EN 50117-1:2002
Coaxial cables -- Part 1: Generic specification
EN 50117-1:2002/A1:2006Note 3Date expired
(1.7.2009) Cenelec EN 50117-2-1:2005
Coaxial cables -- Part 2-1: Sectional specification for cables ud in
cabled distribution networks - Indoor drop cables for systems operating
at 5 MHz – 1 000 MHz
EN 50117-2-1:2005/A1:2008Note 3 1.12.2010 Cenelec EN 50117-2-2:2004
Coaxial cables -- Part 2-2: Sectional specification for cables ud in
cabled distribution networks - Outdoor drop cables for systems operat
ing at 5 MHz – 1 000 MHz
EN 50117-2-2:2004/A1:2008Note 3 1.12.2010 Cenelec EN 50117-2-3:2004
Coaxial cables -- Part 2-3: Sectional specification for cables ud in
cabled distribution networks - Distribution and trunk cables for systems
operating at 5 MHz – 1 000 MHz
EN 50117-2-3:2004/A1:2008Note 3 1.12.2010 Cenelec EN 50117-2-4:2004
Coaxial cables -- Part 2-4: Sectional specification for cables ud in
cabled distribution networks - Indoor drop cables for systems operating
at 5 MHz – 3 000 MHz
EN 50117-2-4:2004/A1:2008Note 3 1.12.2010 Cenelec EN 50117-2-5:2004
Coaxial cables -- Part 2-5: Sectional specification for cables ud in
cabled distribution networks - Outdoor drop cables for systems operat
ing at 5 MHz – 3 000 MHz
EN 50117-2-5:2004/A1:2008Note 3 1.12.2010
ESO(1)Reference and title of the harmonid standard
(and reference document)Reference of superded
standard
of presumption of conformity
of superded standard
Note1
Cenelec EN 50117-3-1:2002
Coaxial cables -- Part 3-1: Sectional specifications for cables ud in Tele
com applications - Miniaturized cables ud in digital communication
systems
Cenelec EN 50117-4-1:2008
Coaxial cables -- Part 4-1: Sectional specification for cables for BCT
cabling in accordance with EN 50173 - Indoor drop cables for systems
operating at 5 MHz – 3 000 MHz
Cenelec EN 50146:2000
Cable ties for electrical installations
Cenelec EN 50156-1:2004
Electrical equipment for furnaces and ancillary equipment -- Part 1:
Requirements for application design and installation
Cenelec EN 50178:1997
Electronic equipment for u in power installations
Cenelec EN 50194:2000
Electrical apparatus for the detection of combustible gas in domestic
premis -- Part 1: Test methods and performance requirements
Cenelec EN 50194-1:2009
Electrical apparatus for the detection of combustible gas in domestic
premis -- Part 1: Test methods and performance requirements EN 50194:2000
Note 2.1
1.9.2011
Cenelec EN 50214:2006
Flat polyvinyl chloride sheathed flexible cables HD 359 S2:1990
+ EN 50214:1997
Note 2.1
Date expired
(1.10.2008)
Cenelec EN 50250:2002
Conversion adaptors for industrial u EN 50250:1998
Note 2.1
Date expired
(1.7.2005)
Cenelec EN 50262:1998
Cable glands for electrical installations
EN 50262:1998/A1:2001Note 3Date expired
(1.4.2003)
EN 50262:1998/A2:2004Note 3Date expired
(1.10.2007)
Cenelec EN 50266-1:2001
Common test methods for cables under fire conditions - Test for vertical
英语故事短文带翻译flame spread of vertically-mounted bunched wires or cables -- Part 1:
Apparatus HD 405.3 S1:1993
Note 2.1
Date expired
(1.8.2002)
Cenelec EN 50266-2-1:2001
Common test methods for cables under fire conditions - Test for vertical
flame spread of vertically-mounted bunched wires or cables -- Part 2-1:
Procedures - Category A F/R HD 405.3 S1:1993
Note 2.1
Date expired
(1.8.2002)
Cenelec EN 50266-2-2:2001
Common test methods for cables under fire conditions - Test for vertical
flame spread of vertically-mounted bunched wires or cables -- Part 2-2:
Procedures - Category A HD 405.3 S1:1993
Note 2.1
Date expired
(1.8.2002)
Cenelec EN 50266-2-3:2001
Common test methods for cables under fire conditions - Test for vertical
flame spread of vertically-mounted bunched wires or cables -- Part 2-3:
Procedures - Category B HD 405.3 S1:1993
Note 2.1
Date expired
(1.8.2002)
ESO(1)Reference and title of the harmonid standard
(and reference document)Reference of superded
standard
of presumption of conformity
of superded standard
Note1
Cenelec EN 50266-2-4:2001
elephantCommon test methods for cables under fire conditions - Test for vertical
flame spread of vertically-mounted bunched wires or cables -- Part 2-4:
Procedures - Category C HD 405.3 S1:1993
Note 2.1
Date expired
(1.8.2002)
Cenelec EN 50266-2-5:2001
Common test methods for cables under fire conditions - Test for vertical
flame spread of vertically-mounted bunched wires or cables -- Part 2-5
Procedures - Small cables - Category D
Cenelec EN 50267-1:1998
Common test methods for cables under fire conditions - Tests on gas
evolved during combustion of materials from cables -- Part 1: Apparatus HD 602 S1:1992
Note 2.1
Date expired
(1.3.2000)
Cenelec EN 50267-2-1:1998
Common test methods for cables under fire conditions - Tests on gas
evolved during combustion of materials from cables -- Part 2-1: Proce
dures - Determination of the amount of halogen acid gas
Cenelec EN 50267-2-2:1998
Common test methods for cables under fire conditions - Tests on gas
evolved during combustion of materials from cables -- Part 2-2: Proce
dures - Determination of degree of acidity of gas for materials by mea
suring pH and conductivity
Cenelec EN 50267-2-3:1998
Common test methods for cables under fire conditions - Tests on gas
evolved during combustion of materials from cables -- Part 2-3: Proce
dures - Determination of degree of acidity of gas for cables by determi
nation of the weighted average of pH and conductivity HD 602 S1:1992
Note 2.1
Date expired
(1.3.2000)
Cenelec EN 50274:2002
Low-voltage switchgear and controlgear asmblies - Protection against
electric shock - Protection against unintentional direct contact with haz
ardous live parts
Cenelec EN 50288-1:2003
Multi-element metallic cables ud in analogue and digital communica
tion and control -- Part 1: Generic specification
Cenelec EN 50288-2-1:2003
Multi-element metallic cables ud in analogue and digital communica
tion and control -- Part 2-1: Sectional specification for screened cables
characterid up to 100 MHz - Horizontal and building backbone cables
Cenelec EN 50288-2-2:2003
Multi-element metallic cables ud in analogue and digital communica
tion and control -- Part 2-2: Sectional specification for screened cables
characterid up to 100 MHz - Work area and patch cord cables
Cenelec EN 50288-3-1:2003
Multi-element metallic cables ud in analogue and digital communica
tion and control -- Part 3-1: Sectional specification for unscreened cables
characterid up to 100 MHz - Horizontal and building backbone cables
Cenelec EN 50288-3-2:2003
Multi-element metallic cables ud in analogue and digital communica
tion and control -- Part 3-2: Sectional specification for unscreened cables
characterid up to 100 MHz - Work area and patch cord cables
Cenelec EN 50288-4-1:2003
Multi-element metallic cables ud in analogue and digital communica
tion and control -- Part 4-1: Sectional specification for screened cables
characterid up to 600 MHz - Horizontal and building backbone cables
ESO(1)Reference and title of the harmonid standard
(and reference document)Reference of superded
standard
of presumption of conformity
of superded standard
Note1
Cenelec EN 50288-4-2:2003
Multi-element metallic cables ud in analogue and digital communica
tion and control -- Part 4-2: Sectional specification for screened cables
characterid up to 600 MHz - Work area and patch cord cables
Cenelec EN 50288-5-1:2003
Multi-element metallic cables ud in analogue and digital communica
tion and control -- Part 5-1: Sectional specification for screened cables
characterized up to 250 MHz - Horizontal and building backbone cables
Cenelec EN 50288-5-2:2003
Multi-element metallic cables ud in analogue and digital communica
tion and control -- Part 5-2: Sectional specification for screened cables
characterized up to 250 MHz - Work area and patch cord cables
Cenelec EN 50288-6-1:2003
Multi-element metallic cables ud in analogue and digital communica
tion and control -- Part 6-1: Sectional specification for unscreened cables
characterid up to 250 MHz - Horizontal and building backbone cables
Cenelec EN 50288-6-2:2003
derivativeMulti-element metallic cables ud in analogue and digital communica
tion and control -- Part 6-2: Sectional specification for unscreened cables
characterid up to 250 MHz - Work area and patch cord cables
Cenelec EN 50288-7:2005
Multi-element metallic cables ud in analogue and digital communica
tion and control -- Part 7: Sectional specification for instrumentation and
control cables
Cenelec EN 50289-1-3:2001
Communication cables - Specifications for test methods -- Part 1-3: Elec
trical test methods - Dielectric strength
Cenelec EN 50289-1-4:2001
Communication cables - Specifications for test methods -- Part 1-4: Elec
trical test methods - Insulation resistance
仓木麻衣孙燕姿Cenelec EN 50290-2-1:2005
Communication cables -- Part 2-1: Common design rules and construc
tion
Cenelec EN 50290-2-20:2001
Communication cables -- Part 2-20: Common design rules and construc
tion - General
Cenelec EN 50290-2-21:2001
Communication cables -- Part 2-21: Common design rules and construc
tion - PVC insulation compounds
EN 50290-2-21:2001/A1:2007Note 3Date expiredobjective
(1.3.2010)
Cenelec EN 50290-2-22:2001
Communication cables -- Part 2-22: Common design rules and construc
tion - PVC sheathing compounds
EN 50290-2-22:2001/A1:2007Note 3Date expired
(1.3.2010)
Cenelec EN 50290-2-23:2001
Communication cables -- Part 2-23: Common design rules and construc
tion - PE insulation
忧思
Cenelec EN 50290-2-24:2002
Communication cables -- Part 2-24: Common design rules and construc
tion - PE sheathing
EN 50290-2-24:2002/A1:2008Note 3 1.11.2011
ESO(1)Reference and title of the harmonid standard
(and reference document)Reference of superded
standard
of presumption of conformity
of superded standard
Note1
Cenelec EN 50290-2-25:2002
Communication cables -- Part 2-25: Common design rules and construc
tion - Polypropylene insulation compounds
Cenelec EN 50290-2-26:2002
Communication cables -- Part 2-26: Common design rules and construc
tion - Halogen free flame retardant insulation compounds
EN 50290-2-26:2002/A1:2007Note 3Date expired
(1.3.2010)
Cenelec EN 50290-2-27:2002
Communication cables -- Part 2-27: Common design rules and construc
tion - Halogen free flame retardant thermoplastic sheathing compounds
EN 50290-2-27:2002/A1:2007Note 3Date expired
(1.3.2010)
Cenelec EN 50290-2-28:2002
Communication cables -- Part 2-28: Common design rules and construc
tion - Filling compounds for filled cables
Cenelec EN 50290-2-29:2002
Communication cables -- Part 2-29: Common design rules and construc
tion - Cross-linked PE insulation compounds
Cenelec EN 50290-2-30:2002
Communication cables -- Part 2-30: Common design rules and construc
tion - Poly(tetrafluoroethylene-hexafluoropropylene) (FEP) insulation and
sheathing
Cenelec EN 50290-4-1:2001
Communication cables -- Part 4-1: General considerations for the u of
cables - Environmental conditions and safety aspects
Cenelec EN 50363-0:2005
Insulating, sheathing and covering materials for low-voltage energy
cables -- Part 0: General introduction
Cenelec EN 50363-1:2005
Insulating, sheathing and covering materials for low voltage energy
cables -- Part 1: Cross-linked elastomeric insulating compounds
Cenelec EN 50363-2-1:2005
Insulating, sheathing and covering materials for low voltage energy
cables -- Part 2-1: Cross-linked elastomeric sheathing compounds
Cenelec EN 50363-2-2:2005
learning chineInsulating, sheathing and covering materials for low voltage energy
cables -- Part 2-2: Cross-linked elastomeric covering compounds
Cenelec EN 50363-3:2005
Insulating, sheathing and covering materials for low voltage energy
cables -- Part 3: PVC insulating compounds
Cenelec EN 50363-4-1:2005
Insulating, sheathing and covering materials for low voltage energy
cables -- Part 4-1: PVC sheathing compounds
广州电脑维修培训Cenelec EN 50363-4-2:2005
Insulating, sheathing and covering materials for low voltage energy
cables -- Part 4-2: PVC covering compounds
Cenelec EN 50363-5:2005
Insulating, sheathing and covering materials for low voltage energy
cables -- Part 5: Halogen-free, cross-linked insulating compounds
