40A
PASSIVATED ASSEMBLED CIRCUIT ELEMENTS P400 SERIES
1
Bulletin I2776 rev. E 04/99
I D
40A @ T C
80°C I FSM
@ 50Hz 385A @ 60Hz
400A I 2t
@ 50Hz 745A 2s
@ 60Hz
680A 2s I 2√t 7450A 2√s V RRM 400 to 1200
V V INS 2500V T J
- 40 to 125汽车换挡技巧
°C
Parameters英语英标学习
P400
Units
Major Ratings and Characteristics
Description
The P400 ries of Integrated Power Circuits con-sists of power thyristors and power diodes configured in a single package. With its isolating ba plate, mechanical designs are greatly simpli-fied giving advantages of cost reduction and reduced size.
Applications include power supplies, control cir-cuits and battery chargers.
Features
Glass passivated junctions for greater reliability Electrically isolated ba plate Available up to 1200 V RRM , V DRM High dynamic characteristics
Wide choice of circuit configurations
Simplified mechanical design and asmbly UL E78996 approved
P400 Series
yesterdays
2Bulletin I2776 rev. E 04/99
V RRM maximum repetitive V RSM maximum non-V DRM maximum
zilingI RRM max.
Type number
peak rever voltage repetitive peak rever
repetitive peak off-state
@ T J max.
voltage
voltage V V
V
mA
P401, P421, P43140050040010
P402, P422, P432600700600P403, P423, P433800900800P404, P424, P434100*********P405, P425, P435
1200
1300
1200
I D Maximum DC output current 40A @ T C = 80°C, full bridge circuits I TSM Max. peak one-cycle 385A
t = 10ms No voltage I FSM
non-repetitive on-state 400t = 8.3ms reapplied or forward current
325t = 10ms 100% V RRM 340
t = 8.3ms
reapplied Sinusoidal half wave,I 2t
Maximum I 2t for fusing 745A 2s
t = 10ms No voltage Initial T J = T J max.
sapphire是什么意思
680t = 8.3ms reapplied 530t = 10ms 100% V RRM 480
t = 8.3msaport
reapplied
I 2
√t
Maximum I 2
√t for fusing
7450A 2
√s
t = 0.1 to 10ms, no voltage reapplied I 2t for time tx = I 2√t . √tx
V T(TO)1Low value of threshold voltage 0.83(16.7% x π x I T(AV) < I < π x I T(AV)), T J = T J max.V T(TO)2High value of threshold voltage 1.03(I > π x I T(AV)), T J = T J max.
r t1
Low level value of on-state slope resistance
r t2
High level value of on-state slope resistance
V TM Max. peak on-state or T J = 25°C, I TM = π x I T(AV)V FM forward voltage drop
T J = 25°C, I TM = π x I F(AV)di/dt
Maximum non repetitive rate of T J = 125°C from 0.67 V DRM
ri of turned on current
I TM = π x I T(AV), I g = 500mA, tr < 0.5µs, tp > 6µs I H Maximum holding current 130mA T J = 25°C anode supply = 6V, resistive load I L
Maximum latching current
250
mA
T J = 25°C anode supply = 6V, resistive load
Parameter
P400
Units Conditions
On-state Conductionubound
V
9.61
7.01
m Ω
(16.7% x π x I T(AV) < I < π x I T(AV)), T J = T J max.
(I > π x I T(AV)), T J = T J max.1.4V
200A/µs ELECTRICAL SPECIFICATIONS Voltage Ratings
P400 Series
3
Bulletin I2776 rev. E 04/99
dv/dt
Maximum critical rate of ri of off-state voltage
I RRM Max. peak rever and off-state I DRM leakage current at V RRM , V DRM I RRM Max peak rever leakage current 100µA T J = 25°C
50Hz, circuit to ba, all terminal shorted,
T J = 25°C, t = 1s
Blocking
Parameter
P400Units Conditions
200
V/µs
T J = 125°C, exponential to 0.67 V DRM gate open
10mA T J = 125°C, gate open circuit V INS
RMS isolation voltage
2500
V
P GM Maximum peak gate power
8P G(AV)Maximum average gate power
2I GM Maximum peak gate current 2A
- V GM Maximum peak negative gate voltage
V GT
Maximum gate voltage required 3T J = - 40°C to trigger
2T J = 25°C Anode Supply = 6V resistive load
1
T J = 125°C I GD
Maximum gate current 90T J = - 40°C
required to trigger
60mA
T J = 25°C Anode Supply = 6V resistive loadleader
35
T J = 125°C
V GD Maximum gate voltage that will not trigger I GD
Maximum gate current that will not trigger
Parameter
P400
Units Conditions
10Triggering
W V
0.2
V
T J = 125°C, rated V DRM applied
2
mA
T J = 125°C, rated V DRM applied
T J Max. operating temperature range -40 to 125T stg
Max. storage temperature range
-40 to 125R thJC Max. thermal resistance,
1.05K/W DC operation per junction
junction to ca
R thCS Max. thermal resistance,
0.10K/W Mounting surface, smooth and gread
zincoxide
ca to heatsink
T
Mounting torque, ba to heatsink
4
Nm
wt Approximate weight 58 (2.0)g (oz)
Parameter
P400
Units
Conditionstry to do
Thermal and Mechanical Specification
°C A mounting compound is recommended and the torque should be checked after a period of 3 hours to allow for the spread of the compound
P400 Series
Bulletin I2776 rev. E 04/99
P400 Series
Bulletin I2776 rev. E 04/99
