汉语意思英语名称
7：24锥柄立铣刀end mills with 7:24 taper shank
阿基米德螺旋线archimedes spiral
凹半圆铣刀concave milling cutters
百分表dial gauges
摆线trochoids
半径样板radials template
壁厚千分尺tube micrometers
变位齿轮x-gear
变位齿轮；gears with addendum modification
变位齿轮副x-gear pair
有声读物免费下载mp3变位系数modification cofficient
标准齿轮standard gear/非变位齿轮X-zero gear
标准中心距reference centre distance
不对称双角铣刀double unequal-angle cutters
槽宽spacewidth
槽宽半角spacewidth half angle
长幅外摆线prolate epicycloid
尺寸dimension
david beckham
齿槽tooth space
齿顶高addendum
齿顶圆tip circle
齿顶圆柱面tip cylinder
齿端修薄end relief
齿根高dedendum
齿根过渡曲面fillet
齿根圆root circle
齿根圆角半径fillet radius
齿根圆柱面root cylinder
齿厚tooth thickness
齿厚半角tooth thickness half angle
skirtup齿厚游标卡尺gear tooth vernier callipers
齿距pitch
齿距角angular pitch
齿宽 facewidth
齿廓tooth profile
齿廓修形profile modification/profile correetion
齿轮toothed gear; gear
齿轮的变位addendum modification
研究生报名流程
齿轮的啮合engagement of gear
齿轮副gear pair
齿轮系gear train /train of gear
齿轮折断breakage
齿面tooth flank
齿面的接触contact of tooth flanks
齿面疲劳surface fatigue
齿全高tooth depth
齿数number of teeth
齿数比gear ratio
齿条rack
齿向修形axial modification/longitudinal correction
齿形角nomial pressure angle（端面压力角transver pressure angle）传动比transmission ratio
从动齿轮driven gear
粗齿锯片铣刀metal slotting saws with coar teeth
错齿三面刃铣刀side and face milling cutter with double alternate helix
大齿轮wheel,gear
大量程百分表long range dial gauge
大外径千分尺large micrometers
带表卡尺dail callipers
单角铣刀single angle cutter
当量齿数virtual number of teeth/equivalent number of teeth
刀口形直尺straight edge
导程lead
导程角lead angle
导程角lead angle
顶隙bottom clearance（侧隙backlash）
顶圆直径tip diameter
端面齿槽宽transver spacewidth
端面齿顶厚crest width
端面齿厚transver tooth thickness
端面齿距transver pitch
端面齿廓transver profile
端面基节transver ba pitch
端面基圆齿厚transver ba thickness
端面径节transver diametral pitch
端面模数transver module
端面啮合线path of contact/transver path of contact
端面弦齿厚transver chordal tooth thickness
端面重合度transver contact ratio
端平面transver plane
短幅外摆线curtate epicycloid
对称双角铣刀double equal-angle cutters
法平面normal plane
法线nomal
法向侧隙normal backlash
法向齿槽宽norminal spacewidth
法向齿顶厚normal crest width
法向齿厚normal tooth thickness
法向齿距normal pitch
法向齿廓normal profile
法向基节normal ba pitch/端面基节transver ba pitch
法向基圆齿厚normal ba thickness
法向径节normal diametral pitch
法向模数normal module
法向弦齿厚normal chordal tooth thickness
非变位齿轮副x-zero gear pair
分度圆reference circal
分度圆柱面reference cylinder
分圆直径reference diameter
杠杆百分表dial test indicator
杠杆千分表dial test indicator
杠杆千分尺indicating micrometers
高度变位齿轮副gear pair with reference centre distance
高度游标卡尺height vernier callipers
高速钢车刀条high speed steel tool bits
根圆直径root diameter
工作齿面working flank/非工作齿面non-working flank
公差tolerance
公法线长度ba tangent length
公法线千分尺gear tooth micrometers
共轭齿廓conjugate profile
鼓形齿crowed teeth
鼓形修整crowing
固定弦齿高constant chordal height
固定弦齿厚constant width
基本齿条basic rack
基本齿形basic rack tooth profile
基圆ba circle
基圆导程角ba lead angle
基圆螺旋角ba helix angle
基圆直径ba diameter
基圆柱面ba cylinder
基准线datum line
尖齿槽铣刀flat relieved tooth slotting cutters日本大阪城公园
尖头千分尺point micrometers
检验verification
渐开螺旋面involute helicoid
渐开线involute
渐开线圆柱齿轮involute cylindrical gear
渐开线圆柱齿轮involute cylindrical gear
渐开线圆柱面involute cylinder
渐开线直齿渐开线花键量规gauge for straight cylindrical involute splines
交错轴齿轮副gear pair with non-parallel non-intercting axes
胶合scoring
角度angle
角度变位圆柱齿轮gear pair with modifid centre distance
角度铣刀angle cutters
节点pitch point
节线pitch line
节圆pitch circle
节圆直径pitch diameter
节圆柱面pitch cylinder
径节diametral pitch
径向变位量addendum modification(for external gear)/dedendum modification（for internal gears）径向变位系数addendum modification coefficient
径向侧隙radial backlash
矩形花键straight-side spline
可转位车刀turning tool with indexable inrt
可转位立铣刀end milling cutters with indexable inrt
可转位面铣刀facemilling cutters with indexable inrts
可转位三面立铣刀side and facemilling cutters with indexable inrts
立铣刀技术条件end mills technical specifications
连心线line of centres
量块gauge blocks
轮齿gear teeth
轮齿表面tooth surface
轮齿的干涉interference of flank
螺纹铣刀screw slotting milling cutters
螺纹样板screw thread template
螺旋helix
螺旋角helix angle（for cylindrical gear），spiral angle（for bevel and hypoid gears）螺旋角helix angle
螺旋线helix and sprials
螺旋线helix
名义中心距nominal centre distance
模具铣刀die sinking end mills
模数module
模数module
磨损wear
莫氏锥柄T形槽铣刀T-slot cutter with mor taper shank
莫氏锥柄立铣刀end mills with mor taper shank
莫氏锥柄圆柱形球头立铣刀cylindrical ball end mills with mor taper shank
莫氏锥柄圆锥形立铣刀tapered end mills with mor taper shank
内齿轮internal gear
内齿轮副internal gear pair
内齿圈ring gear/annulus gear
内径百分表dial borre gauges
内径千分尺internal micrometers
啮合engagement/mesh
啮合干涉meshing interference
啮合角working pressure angle
啮合平面place of action
啮合区域zone of action
啮合曲面surface of action
配对齿轮mating gear
平行轴齿轮副gear pair with parallel axes
普通螺纹量规gauge for general purpo screw threads
千分表dial indicators
切齿干涉cutter interference
人字齿轮douole-helical gear
任意点的端面压力角transver pressure angle at a point at a point
任意点的法向压力角nominal pressure angle at a point
塞尺feeler gauges
三爪内径千分尺three point internal micrometers
深度游标卡尺depth vernier callipers
瞬时接触点point of contact
瞬时接触线line of contact
塑性变形plastic deformation
贵阳会计培训缩短渐开线curtate involute
太阳轮sun gear
感谢信 英文套式立铣刀shell end mills
同侧齿面corresponding flanks
头数number of threads/number of starts
凸半圆铣刀convex milling cutters
挖根undercut
外摆线epicycloid
外齿轮external gear
外齿轮副external gear pair
外径千分尺micrometers
外形、轮廓、侧面profile
万能角度尺universal bevel protractor
蜗杆worm wheel
细齿锯片铣刀metal slotting saws with fine teeth
弦齿高chordal height
相交轴齿轮副gear pair with intercting axes
相啮齿面mating flank
镶齿三面刃铣刀inrted blade side milling cutters
镶齿套式三面刃铣刀inrted blade face milling cutters
削平型直柄立铣刀end mills with flatted parallel shank
小齿轮pinion
斜齿齿轮的当量齿轮virtual gear/virtual spur gear
斜齿条helical rack
斜齿圆柱齿轮helical gear/single-helical gear
斜齿圆柱齿轮副helical gear pair
行星齿轮planet gear
修根root rilief
修缘tip rilief
压力角pressure angle（法向压力角normal pressure angle）延伸渐开线prolate involute
异侧齿面opposite flanks
游标卡尺vernier callipers
有效齿宽effective facewidth
有效齿面active flank
右侧面righ flank
兴奋的读音
pango右旋齿right-hand teeth/左旋齿left-hand teeth
圆的渐开线involute to a circle
圆角铣刀corner-rounding cutters
圆周侧隙circumferential backlash
圆柱齿轮cylindrical gear
圆柱齿轮副cylindrical gear pair
圆柱螺旋线circular helix/helix
圆柱形铣刀cylindrical cutters
圆锥螺旋线conical spiral
正弦规sine bars
直柄T槽铣刀T-slot cutter with parallel shank
直柄立铣刀end millls with parallel shank
直柄圆柱形球头立铣刀cylindrical ball end mills with parallel shank
直柄圆锥形立铣刀tapered end mills with parallel shank
直柄圆锥形球头立铣刀tapered ball end mills with parallel shank
直齿三面刃铣刀side and face milling cutter with straight teeth
直齿条spur rack
会计制度设计直齿圆柱齿轮spur gear
直齿圆柱齿轮副spur gear pair
中心距centre distance
重合度contact ratio and overlap ratio
轴交角shaft angle
轴向齿距axial pitch
轴向齿廓axial profile
轴向径节axial diametral pitch
轴向模数axial module
主动齿轮driving gear
锥齿轮bevel gear
