GB/T 20019-2005/ISO 14231:2000 | 热喷涂 热喷涂设备的验收检查 (ISO 14231:2000,IDT) |
GB/T 19823-2005/ISO 14921:2001 | 热喷涂 工程零件热喷涂涂层的应用步骤 (ISO 14921:2001,IDT) |
GB/T 19824-2005 | 热喷涂 热喷涂操作人员考核要求 (ISO 14918:1998,MOD) |
GB/T 12607-2003 | 热喷涂涂层命名方法 (代替GB/T 12607-90) |
GB/T 12608-2003 | 热喷涂 火焰和电弧喷涂用线材、棒材和芯材 分类和供货技术条件 (ISO 14919:2001, MOD) (代替GB/T 12608-1990) |
GB/T 19352.1-2003/ISO 14922-1:1999 | 热喷涂 热喷涂结构的质量要求 第1部分:选择和使用指南 |
GB/T 19352.2-2003/ISO 14922-2:1999 | 热喷涂 热喷涂结构的质量要求 第2部分:全面的质量要求 |
GB/T 19352.3-2003/ISO 14922-3:1999 | 热喷涂 热喷涂结构的质量要求 第3部分:标准的质量要求 |
GB/T 19352.4-2003/ISO 14922-4:1999 | 热喷涂 热喷涂结构的质量要求 第4部分:基本的质量要求 |
GB/T 19355-2003 | 钢铁结构耐腐蚀防护 锌和铝覆盖层 指南 (ISO 14713:1999,MOD) |
GB/T 19356-2003 | 热喷涂 粉末 成分和供货技术条件 (ISO 14232:2000,MOD) (代替GB/T 12608-1990) |
GB/T 8642-2002 | 热喷涂抗拉结合强度的测定 (ISO 14916:1999,MOD) (代替GB/T 8642-1988) |
GB/T 18719-2002 | 热喷涂 术语、分类 (ISO 14917:1999,MOD) |
GB/T 16744-2002 | 热喷涂 自熔合金喷涂与重熔 (ISO 14920:1999,MOD) (代替GB/T 16744-1997) |
GB/T 18681-2002 | 热喷涂 低压等离子喷涂镍-钴-铬-铝-钇-钽合金涂层 |
GB 11375-1999 | 金属和其他无机覆盖层 热喷涂 操作安全 (代替GB 11375-1989) |
GB/T 17456-1998 | 球墨铸铁管 外表面喷锌涂层 (eqv ISO 8179-1:1995) |
GB/T 9793-1997 | 金属和其他无机覆盖层热喷涂 锌、铝及其合金 (eqv ISO 2063:1991) (代替GB 9793-88,GB 9794-88,GB 9795-88,GB 9796-88 ) |
GB/T 16744-1997 | 热喷涂 自熔合金涂层 (由GB/T 16744-2002代替) |
GB/T 13222-91 | 金属热喷涂层剪切强度的测定 |
GB/T 12608-90 | 热喷涂涂层材料命名方法 (由GB/T 12608-2003和GB/T 19356-2003代替) |
GB/T 12607-90 | 热喷涂涂层设计命名方法 (由GB/T 12607-2003代替) |
GB 11374-89 | 热喷涂涂层厚度的无损测量方法 |
GB 11373-89 baby sister | 热喷涂金属件表面预处理通则 |
GB 9796-88 | 热喷涂铝及铝合金涂层试验方法 (ISO 2063) (由GB/T 9793-1997代替) |
GB 9794-88 | 热喷涂锌及锌合金涂层试验方法 (ISO 2063) (由GB/T 9793-1997代替) |
GB 8642-88 | 热喷涂层结合强度的测定 (由GB/T 8642-2002代替) |
GB 8641-88 | 热喷涂层抗拉强度的测定 |
GB 8640-88 | 金属热喷涂层表面洛氏硬度试验方法 |
JB/T 4108-1999 | 热喷涂设备 分类及型号编制方法 |
JB/T 8425-96 | 铁基喷涂粉末中铬、镍、钼和钒的X射线荧光光谱分析标准试验方法 |
JB/T 8427-96 | 钢结构腐蚀防护热喷涂锌、铝及其合金涂层选择与应用导则 |
JB/T 7703-95 | 热喷涂陶瓷涂层技术条件 |
JB/T 7509-94 | 热喷涂涂层孔隙率试验方法 铁试剂法 |
JB/T 6973-93 | be afraid of热喷涂操作人员考核要求 |
JB/T 6974-93 | 线材喷涂碳钢及不锈钢 |
JB/T 5070-91 | 热喷涂常用术语 |
YB/T 036.13-1992 | 冶金设备制造通用技术条件 氧-乙炔焰金属粉末喷涂 |
YS/T 57-93 | 热喷涂用Fe-Cr-B-Si系合金粉 |
HG/T 2044-2003 | 机械密封用喷涂氧化铬密封环技术条件 (代替HG/T 2044-1991) |
YY 0304-1998 | 等离子喷涂 羟基磷灰石涂层-钛基牙种植体 |
ASTM B833-01a | Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) |
ASTM B907-04 | Standard Specification for Zinc, Tin and Cadmium Ba Alloys Ud as Solders and for Thermal Spraying |
ASTM C633-01 | Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings |
ASTM D4541 | Test Method for Pull-Off Strength of Coating Using Portable Adhesion Testers |
ASTM E1920-03 | cpk是什么意思Standard Guide for Metallographic Preparation of Thermal Sprayed Coatings |
ASTM E376-03 | Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Examination Methods |
ASTM F1044-05 | Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings |
ASTM F1147-05 | Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings |
ASTM F1160-05 | Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings |
ASTM F1926-03 | Standard Test Method for Evaluation of the Environmental Stability of Calcium Phosphate Coatings |
ASTM F1609-03 | Standard Specification for Calcium Phosphate Coatings for Implantable Materials |
ASTM F1978-00e1 | Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the TaberTM Abrar |
ASTM F2024-00 | X-ray Diffraction Determination of Pha Content of Plasma-Sprayed Hydroxyapatite Coatings |
ASTM F1580-01 | Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants |
DIN EN 582-1994 | 南京营养师培训Thermal spraying; determination of tensile adhesive strength; German version EN 582:1993 |
DIN EN 657-2005 | 伦敦的艺术大学Thermal spraying - Terminology, classification; German version EN 657:2005 |
DIN EN 1274-2005 | Thermal spraying - Powders - Composition, technical supply conditions; German version EN 1274:2004 |
DIN EN 1395-1996 | Thermal spraying - Accpetance inspection of thermal spraying equipment; German version EN 1395:1996 |
DIN EN 13214-2001 | Thermal spraying - Thermal spray coordination - Tasks and responsibilities; German version EN 13214:2001 |
DIN EN 13507-2001 | Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying; German version EN 13507:2001 |
DIN EN ISO 2063-2005 | Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys (ISO 2063:2005); German version EN ISO 2063:2005 |
DIN EN ISO 1463-2004 | Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003); German version EN ISO 1463:2004 |
DIN EN ISO 9220-1995 | tell me a lieMetallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:1988); German version EN ISO 9220:1994 |
DIN EN ISO 14918-1999 | Thermal spraying - Approval testing of thermal sprayers (ISO 14918:1998); German version EN ISO 14918:1998 |
DIN EN ISO 14919-2001 | Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification; Technical supply conditions (ISO 14919:2001); German version EN ISO 14919:2001 |
DIN EN ISO 14920-1999 | Thermal spraying - Spraying and fusing of lf-fluxing alloys (ISO 14920:1999); German version EN ISO 14920:1999 |
DIN EN ISO 14921-2001 | Thermal spraying - Procedures for the application of thermally sprayed coatings for engineering components (ISO 14921:2001); German version EN ISO 14921:2001 |
DIN EN ISO 14922-1:1999 | Thermal spraying – Quality requirements of thermally sprayed structures Part 1: Guidance for lection and u (ISO 14922-1:1999) |
DIN EN ISO 14922-2:1999 | Thermal spraying – Quality requirements for thermally sprayed structures Part 2: Comprehensive quality requirements (ISO 14922-2:1999) |
DIN EN ISO 14922-3:1999 | Thermal spraying – Quality requirements for thermally sprayed structures Part 3: Standard quality requirements (ISO 14922-3:1999) |
DIN EN ISO 14922-4:1999 | Thermal spraying – Quality requirements for thermally sprayed structures Part 4: Elementary quality requirements (ISO 14922-4:1999) |
DIN EN ISO 14923:2003 | Thermal spraying - Characterization and testing of thermally sprayed coatings |
DIN EN ISO 14924-2005 | Thermal spraying - Post-treatment and finishing of thermally sprayed coatings (ISO 14924:2005); German version EN ISO 14924:2005 |
DIN EN ISO 17834-2004 | Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures (ISO 17834:2003); German version EN ISO 17834:2003 |
DIN 27201-10-2005 | State of railway vehicles - Basic principles and production technology - Part 10: Thermal spraying |
DIN EN 14665-2005 | Thermal spraying - Thermal sprayed coatings - Symbolic reprentation on drawings; German version EN 14665:2004 |
DIN EN 14616-2005 | Thermal spraying - Recommendations for thermal spraying; German version EN 14616:2004 |
DIN EN ISO 17836-2005 | Thermal spraying - Determination of the deposition efficiency for thermal spraying (ISO 17836:2004); German version EN ISO 17836:2004 |
DIN EN ISO 10308-2006 | Metallic coatings - Review of porosity tests (ISO 10308:2006); German version EN ISO 10308:2006 |
ISO 2063:2005 | 通关单英文Thermal spraying -- Metallic and other inorganic coatings -- Zinc, aluminium and their alloys (热喷涂.金属涂层和其他无机覆层.锌、铝及其合金) |
ISO 13779-1-2000 | (外科植入物 羟基磷灰石 第1部分:羟基磷灰石) |
ISO 13779-2-2000 | (外科植入物 羟基磷灰石 第2部分:羟基磷灰石覆涂层) |
ISO 13779-4-2002 | (外科植入物.羟磷灰石.第4部分:涂层粘结强度的测定) |
ISO 14231:2000 | Thermal spraying -- Acceptance inspection of thermal spraying equipment (热喷涂 热喷涂设备的验收检查) |
ISO 14232:2000 | Thermal spraying -- Powders -- Composition and technical supply conditions (热喷涂 粉末 成分和交货技术条件) |
ISO 14916:1999 | Thermal spraying -- Determination of tensile adhesive strength (热喷涂 抗拉结合强度的测定) |
ISO 14917:1999 | Thermal spraying -- Terminology, classification (热喷涂 术语、分类) |
ISO 14918:1998 | Thermal spraying -- Approval testing of thermal sprayers (热喷涂 热喷涂人员的资格考查) |
ISO 14919:2001 | Thermal spraying -- Wires, rods and cords for flame and arc spraying -- Classification -- Technical supply conditions (热喷涂 火焰和电弧喷涂用金属丝材、棒材和粉芯丝材分类 交货技术条件) |
ISO 14920:1999 | Thermal spraying -- Spraying and fusing of lf-fluxing alloys (热喷涂 自熔合金的喷涂及重熔) |
ISO 14921:2001 | Thermal spraying -- Procedures for the application of thermally sprayed coatings for engineering components (热喷涂 工程零件热喷涂涂层的应用步骤) |
ISO 14922-1:1999 | Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 1: Guidance for lection and u (热喷涂 热喷涂结构的质量要求 第1部分:选择和应用指南) |
ISO 14922-2:1999 | Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 2: Comprehensive quality requirements (热喷涂 热喷涂结构的质量要求 第2部分:全面质量要求) |
ISO 14922-3:1999 | Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 3: Standard quality requirements (热喷涂 热喷涂结构的质量要求 第3部分:标准质量要求) |
ISO 14922-4:1999 | Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 4: Elementary quality requirements (热喷涂 热喷涂结构的质量要求 第4部分:基本质量要求) |
ISO 14923:2003 | Thermal spraying -- Characterization and testing of thermally sprayed coatings (热喷涂.热喷涂层的表征和试验) |
ISO 14924:2005 | Thermal spraying -- Post-treatment and finishing of thermally sprayed coatings (热喷涂.热喷涂层的后处理和加工) |
本文发布于:2023-06-28 11:17:50，感谢您对本站的认可！
本文链接：https://www.wtabcd.cn/fanwen/fan/90/160411.html
版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系，我们将在24小时内删除。
| 留言与评论（共有 0 条评论） |
