Installation and Maintenance
SPH10 Static Pressure Head
–
报酬英文Eliminates effectively wind disturbances from pressure measurements
初中英语学习方法
– Adaptable to many barometers,directly to Vaisala PTB210–
Durable and easy to clean
剑桥少儿英语官网INTRODUCTION
Vaisala model SPH10 Pressure Head provides an effective elimination of pressure variations in the barometer due to the wind. The SPH10 is easy to clean and maintain. It can be
integrated directly with the Vaisala PTB210 barometer. To other barometers the SPH10 can be connected with pressure tubing.ASSEMBLING
1. Screw the lower bar to the threaded sleeve of the lower
plates (with 6 holes)
2. Screw the upper bar (with mounting plate) to the threaded
sleeve of the upper plates MOUNTING
职业化心态
Select an open location, prefereably a place higher than the surroundings, with no buildings or trees nearby. Attach the SPH10 to a horizontal pole using a mounting plate. A suitable pole is Vaisala nsor mast, type DKP12. However, any other horizontal pole with two screws (M6) in a distance of 41 mm can be ud.
NOTE! The recommended distance of the SPH10 from the vertical pole should be at least 1.5 m.
1. Loon the two fixing screws of the pole and fix the SPH10
into the pole as indicated in Figure 1.2. Attach the SPH10 by tightening the screws. (The pressure
Head is removed by looning the two screws).
CONNECTION TO THE VAISALA PTB210(e figure 2)
1. Detach the threaded nipple and the gasket (e figure 1).
2. Place the O-ring into the barometer groove.
一对一数学辅导3. Attach the PTB210 to the SPH10 with two fixing screws.afford是什么意思
no rervationsCONNECTION TO THE OTHER BAROMETERS Connect the barometer to the threaded nipple (figure 1) by using a plastic tube with an inner diameter of 4 mm.
Pole
PTB210Barometer
Fixing screw with a washer (included in the PTB210)
U440en-1.1
Ref. U440en-1.1
TECHNICAL DATA
ilunchProperty
Description / value
雅思学习计划
Materials
Plates Polycarbonate
Bars Offshore Aluminium Mounting with 2 bolts美国国会大厦暴力事件
(M6 x minimum 20 mm)Weight
800 g
Ho connection barbed fitting for 4 mm I.D. ho or Rp1/4 thread (parallel)Operating conditions
-60°C...+ 80°C
MAINTENANCE
1. 2. 3.
4. 5. DIMENSIONS (in mm)
