Instructionswhen christmas comes to town
1. Specifications for gears asmbled
The torch is equipped with the following 8 different gears:
Gear | 线形动物Description |
High light | The one offers the highest luminance. At this gear, the torch provides the maximum luminance output, when the consumption speed of batteries is accordingly higher. |
Medium light | The one between high and low light. At this gear, a high luminance is likely to be projected for a comparatively longer time. |
Low light | The one offers the lowest luminance, suitable for reading at short range. Although high or medium light can give out strong light, light of this kind is dazzling for reading at short range, when low light would suit. Of cour, batteries at this gear would last for the longest time. |
Quick flash | LED flashes at the frequency of 15 times per cond. |
2010上海高考英语Interrupted quick flash | LED quickly flashes at the frequency of 15 times per cond for 0.5 conds, paus for 0.5 conds, and then flashes again in this way. |
Slow flash | Every cond is made up of one on-and-off cycle: a flash is on for 0.5 conds and off for 0.5 conds.2011年高考试卷 |
Beacon light | A brief and quick flash is on once every two conds. |
SOS light | LED’s on-and-off signifies SOS signals for help in emergency. SOS signals of this kind is shown through LED’s on-and-off in Mor Code: first LED gives out flash 3 times interrupted by short intervals, then 3 times interrupted by longer intervals, and again 3 times interrupted by short intervals. 5 conds after the first group is done, LED nds out another group of signal light combination as mentioned above. Caution！No SOS signals in non-emergency. |
scuba | |
bearpaw
2. Operation for switchover
● tail switch operation
The tail switch is a button switch with the function of button-pressing for locking and unlocking, which is to realize the operation of internal switches through the metallic button’s delivering the pressing force in the following specific modes:
◆when the switch is off, if the metallic button is presd hard, after it is relead, the switch will then be kept on, circuit connected with LED on.
◆when the switch is on, if the metallic button is presd hard, after it is relead, the switch will then be unlocked and kept off with LED accordingly off.
英文童话故事◆when the switch is on, if the metallic button is presd gently, LED will be off immediately, but after the button is relead, LED will then be on again, and the switch will then be kept on. This operation is defined as the “gentle pressing” that LED goes through momentary on-and-off as the metallic button is gently presd and relead.
●上海英语培训机构how to switch over
If the torch is turned on for the first time, or turned on again after it is turned off for the first time and remains off or at least 2 conds, the gear will then be automatically switched to the first gear in either ca: “high light”.
In the mode that the torch is kept on when LED is on, press the tail switch gently, and the torch will be switched to another gear. The 8 different gears asmbled herein will be switched on by turns.
Caution: if you have any problem with switchover before initial u, plea contact relevant salespeople or the after-sale rvice department for more information.
3. Load batteries in the right way
Unscrew the tail cover, put the batteries into the cabin with the positive electrode toward the torch head, and then screw the cover tight. If batteries are loaded in the wrong way, the torch won’t work due to circuit protection, but it will resume normal work after batterie
s are unloaded and reloaded in the right way.
日文翻译中文转换器
Caution: batteries with no-load voltage over 2V are not preferred in ca the internal circuit suffers from damages. Only batteries with on-load voltage of or under 2V are recommended. Due to excellent discharging performance, NiMH batteries are strongly recommended here.
Maintenance
Four silicone rings are equipped, two in front of the middle pipe and two at the back, providing excellent water-proof performance. For daily u, the torch will continue normal work even if it is accidentally soaked in the water.
Keep the water-proof rings lubricated. Valine and silicone oil are preferred, and little ud will work. When you screw the middle pipe or the tail pipe and feel it tough, it is a sign for lubrication.
vermeerCaution: if water-proof rings are not lubricative, they won’t perform well, and lubrication m
ust be done timely.
Four extra water-proof rings are provided among the spare parts for future replacement.
Unload batteries if the torch remains unud for a long time.
If the optical lens are stained with dust or dirt, plea try blowing dust or dirt away. If some dust or dirt still stays after the blowing, then clean the lens with lens tissue or chamois leathers.
