哈斯操控面板
<i>哈斯操作面板</i>
<i>哈斯操作面板</i>
版本各异 排布相同
rainy days>hereby <i>哈斯操作面板</i>
利马豆 显示键 ― 即使机床在运行中也可按任何的显示键 光标键 功能键 进给键
模态键
超控键
systran 数字键
字母键
<i>哈斯操作面板</i>
位置键:*****N (MEM)O***** N0000
按或
(*****R) X Y Z 0.0000 in 0.0000 in 3.5179 in
(WORK G54) X -9.0000 in Y -7.0000 in Z 3.5179 in (DIST TO GO) X 0.0000 in Y 0.0000 in Z 0.0000 in
可呈不同显页: Operators (操作坐标) Work (工作坐标) Machine (机床原点) Dist-to-Go (剩余距离)在 Debug 模态 可查阅 机床的原始数据mushroom是什么意思
(*****) X Y Z 0.0000 in 0.0000 in 3.5179 in
<i>哈斯操作面板</i>qwr
POS-OPER (操作坐标系显页)输入 X, Y, Z 等键 再 按 ORIGIN 可分别各轴清零在手动模态: 按 X, Y, Z 进给键 再 按 ORIGIN 可分别各轴清零 你可输入例如: Z 3.5179 再 按 ORIGIN 显页则呈现其读数POS-OPER (MEM)O***** N0000
X 0.0000 in Y 0.0000 in Z 3.5179 in
内聚力 <i>哈斯操作面板</i>
POS-TO-GO (剩余距离)POS-TO-GO(MEM) O***** N0000
显页 POS-TO-GO 在运行模态: 各轴进给剩余距离动态 在手动模态: 各轴位移累计动态 如果按不同的模态键再回 按手动模态键将会自动调零
X 0.0000 in Y 0.0000 in Z 0.0000 in
<i>哈斯操作面板</i>
偏置键――刀具偏置OFFSET 包括: 刀具偏置 和 工作坐标偏置. 重复点按 OFFSET 键会循环两界面. 输入 数字 并且 按 F1 新读数会覆盖旧读数; 按 F2 会显负的新读数. 按TOOL OFFSET MEAS 键 来设定刀长偏置.OFFSET (MEM) O***** N0000 ACTUAL *****R 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. ***** ----LENGTH-------RADIUS---TOOL *****N *****Y WEAR *****Y WEAR FLUTES 1 4 -11.1234 0. 0. 0. 2 2 3 -11.4567 0 0. 0. 0. 2 3 0 0. 0. 0.
0. 2 4 5 6 7 8 9 10 11 0 0 0 0 0 0 0 0 0 0 0 0 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. WRITE ADD/F1 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. SET/OFSET 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. TOGGLE 2 2 2 2 2 2 2 2 2 2 2 2
右翼方块输入数字则在 CURNT COMDS 现行指令显 示排屑负载和切削表面速度. 设置 Setting 40 设定 刀具偏置 采用半径或直径 设置 Setting 90 设定 刀具数目(上限为 200)
12 13 14 15 CLNT POS
<i>哈斯操作面板</i>
偏置键――工作坐标偏置共有105 个工作坐标偏置: 按 PART ZERO SET 键 来设定工作坐标偏置.OFFSET(JOG) O***** N0000
WORK ZERO OFFSET G CODE X G 52 0.G 54 G 55 -9.0000 0.
Y 0. 0. 0.
Z 0. 0. 0.
G 56 G 56G 58 G 59 G154 P1 G154 P2 G154 P3 G154 P4 G154 P5 G154 P6 G154 P7 G154 P8
0. 0.0. 0. 0. 0. 0. 0. 0. 0. 0. 0.
0. 0.0. 0. 0. 0. 0. 0. 0. 0. 0. 0. WRITE ADD/F1
0. 0.0. 0. 0. 0. 0. 0. 0. 0. 0. 0. SET/OFSET (G110) (G111) (G112) (G113) (G114) (G115) (G116) (G116) TOGGLE
X *****N: -9.0000
***** Z AXIS HANDLE .01
<i>哈斯操作面板</i>
rdinates C Press / X Y Z 0.0000 in 0.0000 in 0.0000 in D00 PGM F0. ***** ***** O***** ; (Mill Engraving HAAS Logo) ; T1 M06 (Tool #1 Engraving Tool) ; G90 G54 G00 X-0.7355 Y0.4929 ; S5000 M03 ; G00 G43 H01 Z1. M08 ; G01 Z0.03 F100. ; G91 ; G01 Z-0.0337
F7. ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y-0.9857 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ;
G00 G49 G69 G17 G80 G90 G98 G90 G98 G20 G54 G40 G64 SP LD: X LOAD: Y LOAD: Z LOAD: Surf Spd
H00 ACT F0. M00 PGM S0 M00 PGM S0 ACT S0 CLNT POS 0% 0% 0% 0% 0 fpm Chip Load 0.0000
TOOL 1 IN ***** LOW GEAR STOP
FD 0.0 SP
0
<i>哈斯操作面板</i>
现行指令――运行时间***** (MEM) O***** N00000
POWER ON TIME
542:21:0CYCLE START TIME
1:23:45FEED ***** TIME
cosmopolitan 按 清除所选显示,但最后 循环不可清除.
垃圾袋英文 0:56:12M30 COUNT #1 1 THIS CYCLE 1:45:67 M30 COUNT #2 36 LAST CYCLE 1:45:56
<i>哈斯操作面板</i>
现行指令――宏程序***** (MEM) O***** N00000
宏程序 显示现值包括: 1-33 和 100-199, 500-699 和 800-999. 用显态键的 上/下 箭头键 浏览各显页.
MACRO *****ES G65 LEVEL = 0 VAR.----VALUE VAR.-----VALUE VAR.----VALUE VAR.----VALUE 1 17 33 2 18 3 19 4 20 5 21 6 22 7 23 8 24 9 25 10 26 11 27 12 28 13 29 14 30 15 31 16 32kaguya
<i>哈斯操作面板</i>
现行指令――保养激活高选的保养项目: 按***** (MEM) O***** N00000*****ANCE - to lect, ORIGIN to change, to adjust Remaining Hours 100 ON-TIME 250 250 1800 10 50 250 50 10 250 ON-TIME ON-TIME ON-TIME ON-TIME CS-TIME ON-TIME CS-TIME ON-TIME ON-TIME ***** - Needs replacement
激活的保养项目则显出设置 167―186 所定的时限并随着 机床 工时的递增而递减. 时限到零时: “*****ANCE DUE” 的提示会显示,但不会出现报警. 再按
AIR FILTER in control enclosure - replace OIL FILTER - replaced ***** OIL - replaced ***** TANK C check level, leakage, oil in coolant WAY LUBE SYSTEM C check level ***** OIL C check level SEALS/***** missing, torn, leaking - check AIR SUPPLY FILTER C check for water *****IC OIL C check level
*****ING ***** WITH ***** HOURS
一次则停止激活所高选的保养项目 两次则恢复默认原值.
<i>哈斯操作面板</i>
现行指令――自动刀具管理自动刀具管理这功能如果被启用 则软件升级时必须 要作备份保存及 数据恢复.
<i>哈斯操作面板</i>
帮助/计算 键:帮助显页 是本迷你手册. 不同的软件版本会有 不同的格式.*****S (EDIT) O***** N00000
MAIN HELPThis the Help Function. You are in the (EDIT) operating mode. You were viewing the *****S display.
A program is not running.The rvo is opened. There are no operational alarms. Press ALARM to get a general description of alarms. Press F1 to get G-code help. Press F2 to get M-code help Enter a word and press F3 to arch for that word. Enter a word and press F4 to arch for that word in each ction title. Press CANCEL to return to your original screen.
