Table of Contents Section 1: Principle of Operation ..................................................................... 2 Model FC 125 ............................................................................................. 3 Model FC 150 ............................................................................................. 4 Model FC 200 ............................................................................................. 5 Model FC 300 ............................................................................................. 6 Model FC 400 ............................................................................................. 7 Model FC 600 ............................................................................................. 8 Section 3: Options ........................................................................................ 9 9 9 Section 4: Performance: GAS-to-GAS ..............................................................10 Section 5: Performance: Water-to-GAS ............................................................11 Section 6: Setup: Water-to-GAS .....................................................................11
Nafion® is a registered trademark of DuPont. FC™ is a trademark of Perma Pure LLC.
Section 1: Principle of Operation
FC™-Series Humidifiers are shell and tube moisture exchangers that allow transfer of water vapor. Humidifiers can be tup Gas-to-Gas or Water-to-Gas. Water molecules are absorbed into walls of the Nafion® tube and transferred to dry gas stream. This transfer is driven by the difference in partial pressures of water vapor on opposing sides.
Section 2: Specifications Model FC125
Model Number FC125-240-5MP FC125-240-7MP FC125-240-10MP
granny chine70A
www lashou cominch mm.
B (Nom.)
emtoinch mm. inch
prefer的过去式
C
mm. inch
D
mm.
7.9 9.9 12.9
level是什么意思200.7 251.5 327.7
5 7 10
127 177.8 254
4.6 6.6 9.6
116.8 167.6 243.8
2.9 4.9 7.9
73.7 124.5 200.7
Materials of construction: Housing – Shell –Polypropylene, End caps – GE Noryl Seals – EPDM (per
oxide cured) Tube bundle headers – Thermot polyurethane Membrane tubing – Nafion® Operating fluid pressure range: 0 to 172 kPa ( 0 to 25 psig) @ 80°C (176°F) Operating fluid temperature range: 1 to 80°C (33 to 176°F) Pressure differential on tubing: 35 kPa (0 to 5 psid) @ 80°C (176°F) Negative pressure differential will collap tubing and must be avoided Storage temperature range: -30 to 60°C (-22 to 140°F) Fittings: Due to differing rates of expansion, metal fittings are not recommended. ABS or Nylon fittings are preferred.
Model FC150yy什么意思
Model Number FC150-480-7PP FC150-480-10PP FC150-480-15PP
A
inch mm.
B (Nom.)
inch mm. inch
C
mm. inch
D
mm.
11.5 14.5 19.5
292.1 368.3 495.3
好的学习方法
7 10 15
177.8 254 381
6.75 9.75 14.75重阳节 英文
171.5 247.7 374.7
4.3 7.3 12.3
109.2 185.4 312.4
Materials of construction: Housing – Polypropylene Seals – EPDM (peroxide cured) Tube bundle headers – Thermot polyurethane Membrane tubing – Nafion® Operating fluid pressure range: 0 to 172 kPa ( 0 to 25 psig) @ 80°C (176°F) Operating fluid temperature range: 1 to 80°C (33 to 176°F) Pressure differential on tubing: 35 kPa (0 to 5 psid) @ 80°C (176°F) Negative pressure differential will collap tubing and must be avoided Storage temperature range: -30 to 60°C (-22 to 140°F) Fittings: Due to differing rates of expansion, metal fittings are not recommended. ABS or Nylon fittings are preferred.
Model FC 200
Model Number
Acoupler
adam levineinch mm.
B (Nom.)
inch mm. inch
C
mm.
FC200-780-7MP 11.1 281.9 FC200-780-10MP 14.1 358.1 Shell diameter: 2.48 inches (63mm)
7 10
177.8 254
6.16 7.16
156.5 181.9
Materials of construction: Housing – Shell – Polypropylene, End caps - GE Noryl Seals – EPDM (peroxide cured) Tube bundle headers – Thermot polyurethane Membrane tubing – Nafion® Maximum operating pressure: 3 Bar Absolute Operating fluid temperature range: 1 to 80°C (33 to 176°F) Pressure differential on tubing: 35 kPa (0 to 5 psid) @ 80°C (176°F) Negative pressure differential will collap tubing and must be avoided Storage temperature range: -30 to 60°C (-22 to 140°F) Fittings: Due to differing rates of expansion, metal fittings are not recommended. ABS or Nylon fittings are preferred.
