Total energy output quantitiespure什么意思>书包用英语怎么说
If the following whole model variables are relevant for a particular analysis, you can request them as output to the data, results, or output databa file (e “Total energy output” in “Output to the data and results files,” Section 4.1.2, and “Total energy output” in “Output to the output databa,” Section 4.1.3). If you do not specify an output region, whole model variables are calculated. When you specify an output region, the relevant energy totals are calculated over the ur-specified region.
The variables are not available for eigenvalue buckling prediction, eigenfrequency extraction, or complex frequency extraction analysis. You cannot specify an output region for modal dynamic, random respon, respon spectrum, or steady-state dynamic analysis.
See “Energy balance,” Section 1.5.5 of the Abaqus Theory Manual, for details of the energy
definitions.2014世界杯分组
ALLAE
“Artificial” strain energy associated with constraints ud to remove singular modes (such as hourglass control), and with constraints ud to make the drill rotation follow the in-plane rotation of the shell elements.
.dat: automatic .fil: automatic .odb Field: no .odb History: yes
ALLCD
Energy dissipated by creep, swelling, and viscoelasticity.
.dat: automatic .fil: automatic .odb Field: no .odb History: yes
ALLEE
combobox
Electrostatic energy.
.dat: automatic .fil: automatic .odb Field: no .odb History: yes
ALLFD
Total energy dissipated through frictional effects. (Available only for the whole model.)
.dat: automatic .fil: automatic .odb Field: no .odb History: yes
ALLIE
Total strain energy. (ALLIE = ALLSE + ALLPD + ALLCD + ALLAE + ALLQB + ALLEE + ALLDMD.)
.dat: automatic .fil: automatic .odb Field: no .odb History: yes
ALLJD
harmonyElectrical energy dissipated due to flow of electrical current.
.dat: automatic .fil: automatic .odb Field: no .odb History: yes
ALLKEros
Kinetic energy.
.dat: automatic .fil: automatic .odb Field: no .odb History: yes
ALLKL
Loss of kinetic energy at impact. (Available only for the whole model.)
.dat: automatic .fil: automatic .odb Field: no .odb History: yes
ALLPD
Energy dissipated by rate-independent and rate-dependent plastic deformation.
.dat: automatic .fil: automatic .odb Field: no .odb History: yes
ALLQB
Energy dissipated through quiet boundaries (infinite elements). (Available only for the whole model.)
.dat: automatic .fil: automatic .odb Field: no .odb History: yes
ALLSD
Energy dissipated by automatic stabilization. This includes both volumetric static stabilization and automatic approach of contact pairs (the latter part included only for the whole model).
.dat: automatic .fil: automatic .odb Field: no .odb History: yes
ALLSE
Recoverable strain energy.
.dat: automatic .fil: automatic .odb Field: no .odb History: yes
ALLVD
Energy dissipated by viscous effects, not inclusive of energy dissipated by automatic stabilization and viscoelasticity.
.dat: automatic .fil: automatic .odb Field: no .odb History: yes
ALLDMD
Energy dissipated by damage.
.dat: automatic .fil: automatic .odb Field: no .odb History: yes
ALLWK
External work. (Available only for the whole model.)
.dat: automatic .fil: automatic .odb Field: no .odb History: yes
ETOTAL
Total energy balance (available only for the whole model). (ETOTAL = ALLKE + ALLIE + ALLVD + ALLSD + ALLKL + ALLFD + ALLJD – ALLWK.)
.dat: automatic .fil: automatic .odb Field: no .odb History: yes
Solution-dependent amplitude variables
Solution-dependent amplitude variables are given automatically with any file output or out副词
put databa request.
LPF
Load proportionality factor in a static Riks analysis.
.dat: no .fil: automatic .odb Field: no .odb History: automatic
AMPCU
Current value of the solution-dependent amplitude.
.dat: no .fil: automatic .odb Field: no .odb History: automatic
RATIO
Current maximum ratio of creep strain rate and target creep strain rate.
.dat: no .fil: automatic .odb Field: no .odb History: automatic
Attributes: | 1 – Total kinetic energy (ALLKE). |
| 2 – Total recoverable (elastic) strain energy (ALLSE). |
| 3 – 埃及王子下载Total external work (ALLWK, available only for the whole model.) |
| 4 – Total plastic dissipation (ALLPD). |
| 5 – Total creep dissipation (ALLCD). |
| 6 – Total viscous dissipation, not including dissipation due to stabilization (ALLVD). |
| 7 – Total loss of kinetic energy at impacts (ALLKL, available only for the whole model). |
| 8 – Total artificial strain energy (ALLAE). |
| 9 – Total energy dissipated through quiet boundaries (ALLQB, available only for the whole model). |
| 10 – Total electrostatic energy (ALLEE). |
| 11 – Total strain energy (ALLIE). |
| 12 – Total energy balance (ETOTAL, available only for the whole model). |
| 13 – Total energy dissipated through frictional effects (ALLFD, available only for the whole model). |
| 14 – Total electrical energy dissipated in conductors (ALLJD). coldcall |
| 15 – Total static dissipation (due to stabilization, ALLSD). |
| 16 – Total damage dissipation (ALLDMD). |
| 17 – Currently not ud. |
| 18 – Currently not ud. |
| |
