ERITAS
D ET N ORSK
quintus怎么读E V ERITAS
Define the guiding geometry needed to define the outer hull and deck levels Notice that the symbol for right mou bottom click is different from left mou bottom click
Pages 14 -18•Part 4 –Make the deck plates
brookeCreate the deck levels and inrt stiffening in between using both plates and beams Pages 19 –27
•Part 5 –Make the column加班英语
wlan中文怎么读Inrt the column between lower deck and above upper deck level Pages 28 –32
•Part 6 –Create the web frames
Inrt three simple web frames and connect to the Pages 33 –34
•Part 7 –Column stiffening
Inrt vertical stiffeners as well as a ring stiffener at top of column Pages 35 –38
•Part 8 –The crane
Model the crane using beams in order to apply the loads at end of crane tip Pages 39 –43
•
Part 9 –Boundary conditions六级成绩什么时候公布2020年12月
ftInrt pinned boundary conditions along all free edges and ensure that the simplified crane beam is connected properly to the shell column model by using linear dependencies Pages 44 –45
•
Part 10 –Loads
Create one loadca with lfweight, another with 75 tonnes load at the crane tip and a load combination where loadfactor 1.6 is ud on the crane load Pages 46 –48
Click start of beam 1Click end of beam
2U right mou button to activate the context nsitive menu此情永不移
3
and lect Material. Select Create/Edit Material to D ET N ORSKE V ERITAS
Find the right ction library from “Brow”and lect the library ‘tbar’(a library containing typical Tbar ship profiles)jade
猫王最好听的歌D ET N ORSK
consolidate
E V ERITAS
