G代码详解（G code details）
AC usage: (axis) =AC ({value}): the absolute size command ud to activate the program gment (axis: the axis name of the axis to be run). Value: the absolute location of the axis to be run
ACP: is ud to return instructions to the positive position. The rotating shaft runs in a negative direction (counterclockwi) to the programmed position.
ACN: is ud to return instructions to the negative position. The axis of revolution runs clockwi (clockwi) to the programmed position.
AP: in polar coordinates, given the terminal position, the instruction pole angle.
RP: the destination radius given in polar coordinates.
DC: is ud to return unknown instructions directly. The axis of rotation runs in a direct and shortest displacement to the programmed position. The rotary shaft runs at most 180 degrees.
CFTCP: maintains a constant feed rate on the center of the cutter path.
Constant feed rate is maintained on the CFC: profile (knife edge).
CFIN: maintains only a constant feed rate along the edge of the concave contour, otherwi a constant feed rate is maintained on the center of the cutter path.
CHF: contour angle, fillet, chamfer length
全国翻译专业资格水平考试CHR: bevel angle, chamfer, width of chamfer in original running direction
有人在敲门
RND: contour angle, fillet, park radius
RNDM: mode chamfer, rounded radius
FRC: rounding / chamfering feed rate, program gment valid
FRCM: rever Park / chamfer feed rate, mode effective
G00 positioning
G01 linear cutting
G02 clockwi circular arc cutting
G03 counter clockwi arc cutting
漫长近义词
G04 pau instruction
G09 stopped testing correctly
G110: the position of the subquent polar coordinates is bad on the last return position.
G111: so that the subquent polar coordinates are bad on the zero point of the current workpiece coordinate system.
G112: the subquent polar coordinates are bad on the last valid pole.
G10 correction ttings
G12 clockwi circumferential cutting
G13 counter clockwi circumferential cutting
The G15 polar coordinate system is cancelled
G153:, like G53, also cancels the overall baline framework
绯闻女孩第一季土豆>成都软件开发培训G16 polar coordinate system tting
G17XY plane ttings, feed direction Z
G18XZ plane ttings, feed direction Y
G19YZ plane ttings, feed direction X
G20 English unit tting
G21 metric unit ttings
G22 software limit tting
G23 software limit tting cancelled
G25 spindle speed lower limit
G26 spindle speed upper limit
G27 mechanical origin ret detection
The G28 automatically returns the mechanical origin through the intermediate point
The G29 automatically returns from the reference point
G30 automatically revert to the cond origin
scarf的复数形式G33 constant pitch thread cutting
G331 cutting internal threads without compensating clamps
G332 without compensating clamps for cutting internal threads, returns, or return instructions
G40 cutter radius correction cancelled
G41 tool radius offt left correction
G42 tool radius partial right correction
G43 tool length is corrected along the forward direction
G44 tool length is corrected along the negative direction
G49 tool length correction cancelled
G45 tool position correction added
G46 tool position correction reduced
G47 tool position correction incread two times
G48 tool position correction two times less
G50 scale function cancelled OFF,
G500: clos the current t of zero offt, mode effective. G505--G599: calls first to ninety-ninth ts of zero offts. G51 proportional function tting ON
lucifer是什么意思
G52 returns to the basic coordinate system
学习外语的网站G53 returns to the mechanical coordinate system
G54 calls the first t of zero offt
townhou
G55 calls cond ts of zero offt
G56 calls third ts of zero offt
stock market
G57 calls fourth ts of zero offt
G58 fifth workpiece coordinate system
G59 sixth workpiece coordinate system
