Issued Date FPC Connector
0.3mm Pitch C
Product Specification
2010-08-21
10.操作指示Instruction upon usage
步骤 1:
Joining step 1： 使用拇指或食指，将上盖往上掀开。
U the thumb or the forefinger, rai the top cover up.
シナリオ
步骤 2:
Joining step 2：
FPC 导电处朝下，平行的插入连接器中。 FPC gets along with conductivly down. The parallel one inrts it in the connector .
步骤 3:
dymo
Joining step 3：lady antebellum
轻压上盖往下旋转至定位，直到 FPC 完全插入 且没有移动。
Press the top cover lightly and rotate down to make a rervation , until FPC is totally inrted and not moved .
步骤 4:
Joining step 4：
FPC removal FPC 退出 小心掀起上盖，将 FPC 退出.
Lift the top cover carefully, withdraw FPC from .
警告 Warning!!
旋转的角度不可大于 135 度。
The whirling angle can't be greater than 135 degrees.cartoon network
Document No: EW-RD068 Product Name: FPC CONN.
8 of 10
E-World Electronic Industry Ltd
Issued Date FPC Connector
0.3mm Pitch C Product Specification 2010-08-21
Document No: EW-RD068 Product Name: FPC CONN.9 of 10zipp
E-World Electronic Industry Ltd
Issued Date FPC Connector
0.3mm Pitch C
Product Specification
2010-08-21
警告
Warning!!
施壓的力量，應該要平均.
The strength of exerting pressure should be average.schoolbag
如圖所示，不要試著做移動或重新確定盖子位置 As illustrated, do not attempt removal or re-positioning of the actuator.
警告 Warning!!
掀蓋的面積，應該要平均.
环球雅思英语培训Lift the area overlayed, should be average.
如圖所示，不要試著做移動或重新確定盖子位置 As illustrated, do not attempt removal or re-positioning of the actuator.
警告 Warning!!
PCB 板平整度必須在 0.1mm max.
The roughness of PCB board must be in 0.1mm max.
miriam
21世纪大英汉词典Document No: EW-RD068 Product Name: FPC CONN.
10 of 10
小学数学概念教学E-World Electronic Industry Ltd
