Sounder
Beacon
2. Safety System Software (S3)
Smoke Detector
11. Initiating Device Circuit (IDC)
14. Signal Audible Module (SAM)
13. Agent Relea Module (ARM)
Beacon
shotinthedark5. Digital Communication Unit (DCUEX)
4. PointWatch Eclip IR Combustible Gas Detector
6. Multispectrum IR 16. Analog Input Module (AIM)
10. Multispectrum IR 1. Eagle Quantum Premier Controller (EQP)
Heat Detector
EAGLE
QUANTUM
PREMIER
CONTROLLER
The microprocessor-
bad Controller
continuously moni-
tors the field devices
on the
L
ocal
Operating Network / Signaling L ine Circuit (L ON/SL C) and
performs the logic functions needed to generate the appropri-
ate output(s). The Controller performs both static and ur
programmable logic operations. Static logic controls the face-
plate displays and relay outputs (alarm, trouble and superviso-
ry) per ANSI/NFPA 72. Static logic also activates built-in
annunciation circuits, consisting of both visible and audible
alarms.
Programmable logic allows the Controller to be customized to
perform a variety of complex logic operations. Using Det-
Tronics Safety System Software (S3), the Controller can be
programmed to implement any cross-zone monitoring, voting,
or timed operations that might be needed in a system.
The Controller also has provisions for communication with exter-
nal devices and software. An optional ControlNet™board is
available for monitoring Eagle Quantum Premier’s system statusele
•Simplex / redundancy operation
•Approved annunciation and releasing device per NFPA 72
•Meets FM/CSA guidelines in an approved gas system
•Programmable logic
•Up to five available rial ports
•Transformer isolation of network ports
•Utilizes MODBUS and Allen Bradley ControlNet protocols
•Eight programmable relay outputs
•Eight digital inputs
•Four-line, 20 character alphanumeric display
宁波一对一•LED status indicators
•Fault tolerant communication loop
•Extensive built-in diagnostics
•Supports up to 246 field devices
•FM/CSA/CENELEC/CE
(For more information refer to Spec Sheet # 90-1148.)伦敦大学国王学院
EQ3730EDIO ENHANCED
DISCRETE INPUT/OUTPUT
MODULE (EDIO)
The 8 Channel EDIO Module expands
the input and output flexibility of the
EQP system. The unit provides continu-
ous and automated fire/gas protection
while ensuring system operation through continuous supervi-
sion of system inputs/outputs and signaling line circuit (SLC).
The EDIO module provides eight channels that can be config-
ured as input/output, two-wire smoke/heat detector, Class A
input, Class A output. Each input channel can accept fire
detection devices such as heat, smoke, or unitized flame
detectors. Each output point can be configured for dry con-
tacts, signaling or releasing output operation. Each channel on
the module is provided with individual indicators for active and
fault conditions.
•Monitors eight independent I/O channels
•Individual channels are configurable as an
Input/Output/Two-wire smoke/heat detectors/ Class A
input/Class A output
•A smoke/heat channel can support up to 15 two-wire smoke
and heat devices per channel
•For Class A input and output wiring, two channels are
required per Class A circuit
•Individual point style is configurable as a supervid or an
unsupervid point
kfc什么意思•Individual point type is configurable for
alarm/supervisory/other input styles,
notification/releasing/dry contact output
•Meets the requirements of NFPA 72
•Panel or DIN rail mounting
(For more information refer to Spec Sheet: # 90-1189.)
EQ3740IPM INTELLIGENT
PROTECTION MODULE
The Intelligent Protection Module (IPM)is specially designed to monitor, super-vi and control one fire suppression hazard.
The IPM is designed to provide continuous and automated local area fire protection, while monitoring system operation through continuous supervision of its Inputs/Outputs and Local Operating Network/Signalling Line Circuit (LON/SLC) connec-tion to the EQP controller.
•Individual channels have the pre-assigned functions neces-sary to deliver a single hazard protection solution •Supports two conventional “two-wire” smoke/heat zones including the ability to ret latched zones. Does not require the u of “relay bas”
(For more information refer to Spec Sheet # 90-1184.)
EQ3710AIM 8 CHANNEL ANA-LOG INPUT MODULE
The 8 Channel Analog Input Module provides a means of connecting devices with a calibrated 4-20 mA out-put signal to the Eagle Quantum Premier System.
EQ3700DCIO INPUT/OUTPUT MODULE (DCIO)
The 8 Channel DCIO Module is spe-cially designed to expand the input and output capability of the Det-Tronics Eagle Quantum Premier System. The unit provides continuous and automated fire/gas protection,while ensuring reliable system opera-tion through continuous supervision of system Inputs/Outputs on the LON/SLC. The DCIO module provides eight channels of configurable input or output points that can be programmed for supervid or unsupervid operation. Each input point can accept dry contact fire detection devices such as heat,smoke, or unitized flame detectors. Each output point can be configured for unsupervid, signaling or releasing output operation. Each channel on the module is provided with indi-vidual indicators for active and fault conditions.
•Monitors eight independent I/O channels
•Individual channels are configurable as an Input or Output •Individual point style is configurable as supervid or unsu-pervid
•Individual point type is configurable for alarm/gas/superviso-ry/other input styles, notification/releasing/unsupervid out-put
•Meets the requirements of NFPA 72•Panel or DIN rail mounting
subject什么意思
(For more information refer to Spec Sheet # 90-1149.)
X5200 UVIR FLAME
DETECTOR
The X5200 meets the most
stringent requirements world-
wide with advanced detection
capabilities and immunity to
extraneous sources, combined
with a superior mechanical design. The detector is equipped
with both automatic and manual optical integrity (o i) test
capability. The mounting arrangement allows the UV and IR
nsors to monitor the same hazardous location with a 90
degree cone of vision. When both nsors simultaneously
detect the prence of a flame, an alarm signal is generated.
The detector has Division and Zone explosion-proof ratings
and is suitable for u in indoor and outdoor applications. A
tri-color LED on the detector faceplate indicates detector sta-
tus condition.
The X5200 housing is available in aluminum or stainless steel,
elizabeth taylorwith NEMA 4X and IP66 rating. Typical applications include
hangars, munitions, petrochemical applications and turbines.
•New patented signal processing, TDSA, Arc rejection
•A new level of fal alarm rejection
•Responds to a fire in the prence of modulated blackbody
radiation (i.e. heaters, ovens, turbines) without fal alarm
•High speed capability
•Microprocessor controlled heated optics for incread resis-
tance to moisture and ice
•Automatic or manual optical integrity (o i) testing
•Calibrated magnetic manual testing — no test lamp required
•Tricolor LED indicates normal operation, fire and fault condi-
tions
•Mounting swivel allows easy sighting
•Integral wiring compartment for ea of installation
•Class A, Style 7 wiring per NFPA-72
•EMI, RFI, EMC Directive Compliant
•FM, CSA, DEMKO (ATEX), CE
•Built-in data logging / event monitoring
(For more information refer to Spec Sheet # 90-1156.)黄褐斑的治疗
X3301 MULTISPECTRUM
INFRARED FLAME
DETECTOR
The X3301 establishes a new
benchmark in area of coverage,
贸易商行multiple-fuel fire detection perfor-
mance and fal alarm rejection. The detector utilizes
EQ3720RM EIGHT CHANNEL
RELAY MODULE
The 8 Channel Relay Module is specially
designed to expand the Output capabili-
ty of the Det-Tronics Eagle Quantum
Premier™ System.
The unit is designed to provide eight
relay output channels for u with non-supervid devices
(PLCs, fans, dampers, etc.).
•Expands the output capabilities of the Det-Tronics Eagle
Quantum Premier™ system
•Provides eight independent relay output channels
•Individual channel LEDs indicate Active and Fault status
•Provides remote output capabilities via LON/SLC
•Panel or DIN rail mounting
•Power LED display
哆来咪英文歌词
•Plug-in wiring connectors
•Immune to RFI and EMI (CE Marked)
(For more information refer to Spec Sheet # 90-1181.)
X2200 UV FLAME DETECTOR
The X2200 offers the highest fal alarm rejection in a UV detector, meeting the most stringent requirements world-wide with advanced detection
X9800 IR FLAME
DETECTOR
The X9800 is the most advanced single frequency infrared flame detector with dual signal pro-cessing capability for high speed respon. The detector
is equipped with both automatic and manual optical integrity (o i ) test capability. The detector has Division and Zone explo-sion-proof ratings and is suitable for u in indoor and outdoor applications. A tri-color LED on the detector faceplate indicates detector status condition.
The X9800 housing is available in aluminum or stainless steel,with NEMA 4X and IP66 rating. Typical applications include turbines, petrochemical applications, automotive applications and dirty environments.
•Unequaled fal alarm rejection, TDSA •High speed capability
•Responds to a fire in the prence of modulated blackbody radiation (i.e. heaters, ovens, turbines) without fal alarm •Microprocessor controlled heated optics for incread resis-tance to moisture and ice
•Automatic or manual optical integrity (o i ) testing
•Calibrated magnetic manual testing — no test lamp required •Tricolor LED indicates normal, fire an
d fault conditions •Operates under adver weather conditions and in dirty environments
•Mounting swivel allows easy sighting
•Integral wiring compartment for ea of installation •Class A, Style 7 wiring per NFPA-72•Built-in data logging / event monitoring
•FM, CSA, DEMKO (ATEX), CE
(For more information refer to Spec Sheet # 90-1160.)
X3302 MULTISPECTRUM INFRARED FLAME DETECTOR
The X3302 Multispectrum Infrared Flame Detector estab-lishes a new benchmark in hydro-gen fire detection performance and fal alarm rejection. The detector utilizes advanced signal processing algorithms sup-ported by an embedded 32-bit microprocessor to provide continuous protection in the
prence of fal alarm sources and environments with infrared radiation prent. The L ong Range version has a detection range of 100 feet on and off axis to a hydrogen fires, and is recommended for any indoor/outdoor application. The detector is available in alu-minum or 316 stainless steel.
•Incread nsitivity and certified performance •MTBF of 145,000 hours
•New standard t for cone of vision, 100 feet on and off axis for hydrogen
•Microprocessor controlled heated optics for optimal perfor-mance in adver environments
•Data logger for event time and date stamping •RS-485 Modbus output
•Automatic optical integrity check on each nsor •Calibrated manual testing/mag o i , no test lamp required •Four conduit entries for easy installation •FM, CSA, DEMKO (ATEX), CE
•Patent number: 5,995,008; 5,804,825; 5,850,182(For more information refer to Spec Sheet # 90-1185.)
