英文原文
中国下一代领导人
How Light Emitting Diodes Work
Light emitting diodes, commonly called LEDs, are real unsung heroes in the electronics world. They do dozens of different jobs and are found in all kinds of devices. Among other things, they form the numbers on digital clocks, transmit information from remote controls, light up watches and tell you when your appliances are turned on. Collected together, they can form images on a jumbo television screen or illuminate a traffic light. Basically, LEDs are just tiny light bulbs that fit easily into an electrical circuit. But unlike ordinary incandescent bulbs, they don't have a filament that will burn out, and they don't get especially hot. They are illuminated solely by the movement of electrons in a miconductor material, and they last just as long as a standard transistor. In this article, we'll examine the simple principles behind the ubiquitous blinkers, illuminating some cool principles of electricity and light in the process.
学英语的好网站
What is a Diode? A diode is the simplest sort of miconductor device. Broadly speaking, a
飞跃英语
miconductor is a material with a varying ability to conduct electrical current. Most miconductors are made of a poor conductor that has had impurities (atoms of another material added to it. The process of adding impurities is called doping. In the ca of LEDs, the conductor material is typically aluminum-gallium-arnide. In pure aluminum-gallium-arnide, all of the atoms bond perfectly to their neighbors, leaving no free electrons (negatively-charged particles to conduct electric current. In doped material, additional atoms change the balance, either adding free electrons or creating holes where electrons can go. Either of the additions make the material more conductive. A miconductor with extra electrons is called N-type material, since it has extra negatively-charged particles. In N-type material, free electrons move from a negatively-charged area to a positively charged area. A miconductor with extra holes is called P-type material, since it effectively has extra positively-charged particles. Electrons can jump from hole to hole, moving from a negatively-charged area to a positively-charged area. As a result, the holes themlves appear to move from a positively-charged area to a negatively-charged area. A diode compris a ction of N-type material bonded to a ction of P-type materi
al, with electrodes on each end. This arrangement conducts electricity in only one direction. When no voltage is applied to the diode, electrons from the N-type material fill holes from the P-type material along the junction
between the layers, forming a depletion zone. In a depletion zone, the miconductor material is returned to its original insulating state -- all of the holes are filled, so there are no free electrons or empty spaces for electrons, and charge can't flow. To get rid of the depletion zone, you have to get electrons moving from the N-type area to the P-type area and holes moving in the rever direction. To do this, you connect the N-type side of the diode to the negative end of a circuit and the P-type side to the positive end. The free electrons in the N-type material are repelled by the negative electrode and drawn to the positive electrode. The holes in the P-type material move the other way. When the voltage difference between the electrodes is high enough, the electrons in the depletion zone are boosted out of their holes and begin moving freely again.As a result, the depletion zone disappears.When the negative end of the circuit is hooked up to the N-type layer and the positive end is hooked up to P-type layer, electrons and holes start moyyq是什么意思
高中英语写作教学
ving. If the P-type side is connected to the negative end of the circuit and the N-type side is connected to the positive end, current will not flow. No current flows across the junction becau the holes and the electrons are each moving in the wrong direction. When the positive end of the circuit is hooked up to the N-type layer and the negative end is hooked up to the P-type layer, the depletion zone gets bigger. The interaction between electrons and holes has an interesting effect -- it generates light! In the next ction, we'll find out exactly why this is.
汉城大学
How Can a Diode Produce Light? Light is a form of energy that can be relead by an atom. It is made up of many small particle-like packets that have energy. The particles, called photons, are the most basic units of light. Photons are relead as a result of moving electrons. In an atom, electrons move in orbitals around the nucleus. Electrons in different orbitals have different amounts of energy. Generally speaking, electrons with greater energy move in orbitals farther away from the nucleus. For an electron to jump from a lower orbital to a higher orbital, something has to boost its energy level. Converly, an electron releas energy when it drops from a higher orbital to a lower on
e. This energy is relead in the form of a photon. A greater energy drop releas a higher-energy photon, which is characterized by a higher frequency. As we saw in the last ction, free electrons moving across a diode can fall into empty holes from the P-type layer. This involves a drop from the conduction band to a lower orbital, so the electrons relea energy in the form of photons. This happens in any diode, but you can only e the photons when the diode is compod of certain material. The atoms in a standard silicon diode, for example, are
www tube8 com videos
arranged in such a way that the electron drops a relatively short distance. As a result, the photon's frequency is so low that it is invisible to the human eye -- it is in the infrared portion of the light spectrum. This isn't necessarily a bad thing, of cour: Infrared LEDs are ideal for remote controls, among other things. Visible light-emitting diodes (VLEDs, such as the ones that light up numbers in a digital clock, are made of materials characterized by a wider gap between the conduction band and the lower orbitals. The size of the gap determines the frequency of the photon -- in other words, it determines the color of the light. While all diodes relea light, most don't do it very effectively. In an
allisonordinary diode, the miconductor material itlf ends up a lot of the light energy. LEDs are specially constructed to relea a large number of photons outward. Additionally, they are houd in a plastic bulb that concentrates the light in a particular direction.
>make friend
