□ Tentative Specification
■Preliminary Specification
□ Approval Specification MODEL NO.: V546HK3
SUFFIX: PS5
Approved By Checked By Prepared By
Chao-Chun Chung Ken Wu
YI-CHEN
Chiang
CONTENTS
REVISION HISTORY (4)
1. GENERAL DESCRIPTION (5)
1.1 OVERVIEW (5)
1.2 FEATURES (5)
1.3 MECHANICAL SPECIFICATIONS (5)
2. ABSOLUTE MAXIMUM RATINGS (6)
2.1 ABSOLUTE RATINGS OF ENVIRONMENT (6)
2.2 ELECTRICAL ABSOLUTE RATINGS(OPEN CELL) (7)specification
3. ELECTRICAL CHARACTERISTICS (8)
wouldrather
3.1 TFT LCD Module (8)
4. BLOCK DIAGRAM OF INTERFACE (11)
4.1 TFT LCD MODULE (11)
货到付款是什么意思5 .INPUT TERMINAL PIN ASSIGNMENT (12)
5.1 TFT LCD OPEN CELL (12)
5.2 LVDS INTERFACE (20)
5.3 COLOR DATA INPUT ASSIGNMENT (21)
6. INTERFACE TIMING (24)
6.1 INPUT SIGNAL TIMING SPECIFICATIONS (24)
6.1.1 Timing spec for Frame Rate = 100Hz (24)
6.1.2 Timing spec for Frame Rate = 120Hz (25)
6.2 POWER ON/OFF SEQUENCE (Ta = 25 ± 2 ºC) (28)
北大青鸟培训机构
6.2.1 POWER ON/OFF SEQUENCE (28)
6.2.2 2D/3D MODE CHANGE2D to 3D SIGNAL SEQUENCE WITHOUT VCC TURN OFF AND TURN ON (29)
7. OPTICAL CHARACTERISTICS (30)
7.1 TEST CONDITIONS (30)
7.2 OPTICAL SPECIFICATIONS (31)
8.PRECAUTIONS (34)
8.1 ASSEMBLY AND HANDLING PRECAUTIONS (34)
8.2 SAFETY PRECAUTIONS (34)
python的re9. DEFINITION OF LABELS (35)
9.1 OPEN CELL LABEL (35)
9.2 CARTON LABEL (37)
10. Packaging (38)
10.1 PACKING SPECIFICATIONS (38)
10.2 PACKING METHOD (38)
11. MECHANICAL CHARACTERISTIC (40)
Appendix A (42)
REVISION HISTORY
Version Date Page
(New)
Section Description
A1(0.0) Oct 03,11 all all Tentative Specification Ver 0.0 was first issued.
B1(1.0) Oct 28,11 all all Preliminary Specification Ver 1.0 was first issued.
how come1. GENERAL DESCRIPTION
1.1 OVERVIEW
V546HK3-PS5 is a 54.6” TFT Liquid Crystal Display product with driver ICs and 4ch-LVDS interface. This product supports 1920 x 1080 HDTV format and can display true 1.073G colors (8-bit + Hi-FRC /color). The backlight unit is not built in.
1.2 FEATURES
CHARACTERISTICS ITEMS SPECIFICATIONS
Screen Diagonal [in] 54.6
Pixels [lines] 1920 ×1080
Active Area [mm] 1209.6(H) x 680.4(V) (54.6” diagonal)
Sub-Pixel Pitch [mm] 0.21(H) x 0.63(V)
Pixel Arrangement RGB vertical stripe
Weight [g] 3450
Physical Size [mm] 1233.2(W) x701.2(H) x 1.80(D) Typ
Display Mode Transmissive mode / Normally black
Contrast Ratio 6000:1 Typ.
(Typical value measured at CMI’s module)
Glass thickness (Array / CF) [mm] 0.7 / 0.7
Viewing Angle (CR>20) +88/-88(H),+88/-88(V) Typ.
(Typical value measured at CMI’s module)
Color Chromaticity R=(0.664, 0.323)
G=(0.233, 0.361)
B=(0.135, 0.099)
W=(0.303, 0.348)
* Plea refer to “color chromaticity” on 7.2
Cell Transparency [%] 6.6%Typ.
(Typical value measured at CMI’s module)
绕弯
Polarizer Surface Treatment Anti-Glare coating (3.5% Low Haze)
Hardness (H)
1.3 MECHANICAL SPECIFICATIONS
Item Min. Typ. Max. Unit Note
Weight - 3450 - g -
I/F connector mounting position The mounting inclination of the connector makes the
screen center within ±0.5mm as the horizontal. (2)对不起
Note (1) Plea refer to the attached drawings for more information of front and back outline dimensions. Note (2) Connector mounting position
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Value
Item
Symbol
Min.
Max.
Unit演讲词
Note
Storage Temperature
TST
-20
+60
ºC
(1)
With CMI Module Operating Ambient Temperature
TOP
50
ºC
(1), (2)
With CMI
Module
明确的目标
Note (1)Temperature and relative humidity range is shown in the figure below. (a) 90 %RH Max. (Ta ≦ 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The maximum operating temperature is bad on the test condition that the surface temperature of
display area is less than or equal to 65 ºC with LCD module alone in a temperature controlled chamber. Thermal management should be considered in final product design to prevent the surface temperature of display area from being over 65 ºC. The range of operating temperature may degrade in ca of improper thermal management in final product design.