CHIMEI INNO L U X DISPLAY CORPORATION
LCD MODULE去黑头的小方法
SPECIFICATION
Customer:
Model Name: AT043TN25 V.2
SPEC NO.: A043-25-TT-21
Date: 2010/05/14
Version: 01
■Preliminary Specification
nfo□Final Specification
For Customer’s Acceptance
Approved by Comment
成都新东方
Approved by Reviewed by Prepared by
Joe Lin
2010/05/27usd什么意思
James Yu
Charlie Chou
2010/05/27
David Lee
2010/05/25
苏州培训中心The copyright belongs to InnoLux. Any unauthorized u is prohibited.
pdtCHIMEI INNO L U X
InnoLux copyright 2004
All rights rerved,
Copying forbidden.
Record of Revision
Version Revi Date Page Content Pre-spec .01 2010/05/14 Initial Relea.
赵公元帅The copyright belongs to CHIMEI InnoLux. Any unauthorized u is prohibited.
CHIMEI INNO L U X
Contents
1. General Specifications (1)
2. Pin Assignment (2)
2.1. T FT LCD Panel Driving Section (2)
3. Operation Specifications (4)
3.1. A bsolute Maximum Ratings (4)
3.2. T ypical operation conditions (5)
3.3 Backlight Driving Conditions (5)
3.4. P ower Sequence (6)
3.5. T iming Characteristics (7)
3.5.1. Timing Conditions (7)
3.5.2.Timing Diagram (8)
4. Optical Specifications ................................................................................. (9)
5. Reliability Test Items (13)
留学生学历认证6. General Precautions (14)
7.1. Safety (14)
高傲的英文7.2. Handling (14)
7.3. Static Electricity (14)
7.4. Storage (14)
7.5. Cleaning (14)
7. Mechanical Drawing (15)
9. Package Drawing (16)
9.1. Packaging Material Table (16)
9.2. Packaging Quantity (16)
9.3. Packaging Drawing (17)
The copyright belongs to InnoLux. Any unauthorized u is prohibited.
1. General Specifications
No. Item Specification Remark
1 LCD size 4.3 inch(Diagonal)
2 Driver element a-Si TFT active matrix
3 Resolution 480 × 3 (RGB) × 272
4 Display mode Normally White, Transmissive
5 Dot pitch 0.066(W) × 0.198(H) mm
6 Active area 95.04(W) × 53.856(H) mm
7 Module size 105.5(W) × 67.2(H) ×2.9(D) mm Note 1
8 Surface treatment Anti-Glare
9 Color arrangement RGB-stripe
10 Interface Digital
11 Backlight Power consumption TBD W(Typ.)
12 Panel Power consumption TBD W (Typ.)
13 Weight TBD (Typ.)
Note 1: Refer to Mechanical Drawing.
2. Pin Assignment
2.1. T FT LCD Panel Driving Section
FPC Connector is ud for the module electronics interface. The recommended model is “FH19SC-40S-0.5SH” manufactured by HIROSE.
Pin No. Symbol I/O Function Remark
1 V LED-P Power for LED backlight cathode
2 V LED+P Power for LED backlight anode
3 GND P Power ground
4 V DD P Power voltage
5 R0 I Red data (LSB)
6 R1 I Red data
7 R2 I Red data
8 R3 I Red data
9 R4 I Red data
10 R5 I Red data
11 R6 I Red data
12 R7 I Red data (MSB)
13 G0 I Green data (LSB)
14 G1 I Green data
15 G2 I Green data
16 G3 I Green data
17 G4 I Green data
18 G5 I Green data
19 G6 I Green data快速记忆法
20 G7 I Green data (MSB)
