INNO L U X DISPLAY CORPORATION
LCD MODULE
SPECIFICATION
Customer:
Model Name: AT056TN53 V.1
SPEC NO.: A056-53-TT-13
Date: 2008/06/03
Version: 03
□Preliminary Specification
■Final Specification
Remark
■AT056TN53 V.1 LCM (PCB)
For Customer’s Acceptance
Approved by Comment
Approved by Reviewed by Prepared by
Joe Linpeacecorps
2008/06/03 Jack Huang
2008/06/03
David Lee
2008/06/03
聯凱光電
The copyright belongs to InnoLux. Any unauthorized u is prohibited.
I NNO L U X
The copyright belongs to InnoLux. Any unauthorized u is prohibited.
InnoLux copyright 2004 All rights rerved, Copying forbidden.
Record of Revision
Version Revi Date Page Content
Pre-spec.01
2007/06/05
Initial Relea
Final-spec.01 2007/10/22 1 Add Backlight Power consumption & Panel Power consumption & Weight
6 Add Max. values of Current Consumption 19 Modify Mechanical Drawing
21 Modify Packaging Drawing 02 2008/04/17
7
Modify Power Sequence
8 Modify Timing Conditions
03 2008/06/03 20 Modify Quantity of LCM Module And Partition
I NNO L U X
tariContents:
agogo1.General Specifications (1)
2.Pin Assignment (2)
3.Operation Specifications (5)
3.1. Absolute Maximum Ratings (5)
3.2.Typical Operation Conditions (6)
3.3.Power Sequence (7)
3.4.Timing Characteristics (8)
3.4.1.Timing Conditions (8)
3.4.2.Timing Diagram (10)wool是什么意思
4. Optical Specifications (13)
5.Reliability Test (17)
6.General Precautions (18)
6.1.Safety (18)
6.2.Handling (18)
6.3.Static Electricity (18)
6.4.Storage (18)
6.5.Cleaning (18)
7.Mechanical Drawing (19)
8.Package Drawing (20)
.8.1.Packaging Material Table (20)
the interview
.
8.2.Packaging Quantity (20)
8.3.Packaging Drawing (21)
The copyright belongs to InnoLux. Any unauthorized u is prohibited.
1.General Specifications
knkNo. Item Specification Remark
1 LCD size 5.6 inch(Diagonal)cogit
2 Driver element a-Si TFT active matrix
3 Resolution 640 × (RGB) × 480
4 Display mode Normally White, Transmissive
5 Dot pitch 0.0588(W) × 0.1764(H) mm
6 Active area 112.896 (W) × 84.672(H) mm
7 Module size 126.5(W) × 100(H) × 5.7(D) mm Note 1
8 Surface treatment Anti-Glare
9 Color arrangement RGB-stripe
10 Interface Digital
11 Backlight Power consumption 1.900W(Typ) Note 2
12 Panel Power consumption 0.660W(Typ) Note 3
13 Weight 88g
Note 1: Refer to Mechanical Drawing.
Note 2: Including LED Driver power consumption.
Note 3: Including T-con Board power consumption.
2.Pin Assignment
TFT LCD Panel Driving Section
FPC connector is ud for the module electronics interface. The recommended model is
FH19-40S -0.5SH manufactured by HiRo.
Pin No. Symbol I/O Function Remark
1 V LED P Power Voltage for LED circuit
2 V LED P Power Voltage for LED circuit
3 ADJ I Adjust the LED brightness with PWM
Pul
Note1,2
4 G LED P Ground for LED circuit
5 G LED P Ground for LED circuit
6 V CC P Power Voltage for digital circuit
调度室7 V CC P Power Voltage for digital circuit
8 MODE I DE or HV mode control Note 3
9 DE I Data enable
10 VS I Vsync signal input
11 HS I Hsync signal input
12 GND P Power groundcia是什么
13 B5 I Blue data input (MSB)
14 B4 I Blue data input
15 B3 I Blue data input
16 GND P Power ground
17 B2 I Blue data input
英语答辩ppt模板18 B1 I Blue data input
19 B0 I Blue data input(LSB)
20 GND P Power ground
21 G5 I Green data input(MSB)
22 G4 I Green data input
23 G3 I Green data input
24 GND P Power ground
25 G2 I Green data input
