OPERATION INSTRUCTION
XD-180 LAMP COLD LIGHT SOURCE
CONTENTS
Ⅰ.General Introduction···························P2
Ⅱ.Character Summary·························P2
Ⅲ. Main technical parameters······················P3
Ⅳ.Working Conditions····························P4
Ⅴ．Basic Components and configuration·············P4
Ⅵ.Operation description·························P5
Ⅶ. Notice ······································P5
Ⅷ..Change the lamp ·····························P6
Ⅸ．Troubleshooting······························P7
Ⅰ.General Introduction
single是什么意思
Xenon cold light source ,which is not only a special instrument of light source but endoscopic supplementary equipment as well. It can provide good and clear light source in clinical . It also can provides the good illumination. when doctor inspecting ,photographing, video recording the body cavity organ.
Ⅱ.Character Summary
1. Using the advanced electrically controlled switching circuit, provides the power source for the high-pressured short arc. Selects the ballhigh pressure short arc gas light as the luminophor. Under the electric circuit high pressure, caus the light bulb positive and negative electricity interelectrode shape electric discharge to shine, produces ultraviolet from to the infrared entire spectrum radiation light source, the visible range light extremel
y rembles the whitelight.
2. Power source output current is ripple small and invariable, make the arc light stable, the optical efficiency high, color is good. In order to avoid other medical equipment movements produces high frequency chirp wave disturbance normal work, We joined the low pass filter system in the power source, enhanced the entire machine stability, thus obtains satisfaction in the clinical obrvation photograph work .
3. The cold light source output strong and the weak, is depends on operating the kneadingboard to touch the switch to control. In order to guarantee in the light source work movement stable and reliable, we ud three air blowersries wind eta path strong radiation design, makes the radiation fully, guarantees the entire machine work stable.
4. Carried out in the design and the production GB9706.1 上海延安中学《Medical electric appliance equipment --- first part: Safe general request》, can guarantee its curity.北方民族大学怎么样
Attention: The cold light source does not have directly to u in an eye illumination
Ⅲ. Main technical parameters
1. external power supplies：220V 50HZ
2. power input:470W
3. fu:5A*2
4. light bulbs powers:180W
5. color temperature:5600K
6. degrees of illumination:54800,000LX
7. working nois:<55db
8. cabinets temperatures:<55 degree
9. curities types:I BFtype
10.Under normal works temperatures continuously leaks the electric current Unit:mA
句号英语Electric current | normal statebit torrent | single failure condition |
To floor drain electric current | <=0.5 | <=1 |
The patient leaks the electric currentdave cowens | <=0.1 | <=0.5 |
The patient leaks the electric current to add the net voltage | --------- | 傲慢与偏见英文读后感<=5 |
| | |
Ⅳ.Working Conditions
1）. ambient temperatures:5-32 degree
2）. relative humidity<=70%
3）. atmospheric pressure:86.0-106.0kPa
Ⅴ．Basic Components and configuration
gumby
考研科目1）. power switches: Entire machine power source supplies
2）3）. degrees of illumination regulating cock: Adjustment degree of illumination size
4） luminous efficiencies mouths: Leads the light beam continually connection
Ⅵ英语警句.Operation description
1. guarantees the gment correctly, the light beam and the luminous efficiency mouth connection is reliable
2. turns on the cold light source power switch, the cooling system starts to work. The light bulb lightens immediately, the lightsource starts to work.
3. press button may transfer the degree of illumination from biggest to zero. ∧move brightly, ∨moves darkly.When finish the job, adjust the lightsource brightness to the lowest, later clos the power switch, guarantees the entire machine full cooling before turn off the machine.
Ⅶ. Notice
1.When work, the cold light source should lay aside toventilates and the steady place, Radiation hole and the back cover suppod to maintain the 15cm space length
2.In work do not let the patient contact the cold ligh tsource
3.After light sources start for 120 conds, the facula to appearthe vibration belong to the normal phenomenon
4.After cold light sources open, do not to look straight ahead the optical cable with the naked eye or the light los the pore, prevent eye to receive the injury.
5.When work, the engine ca does not have to lay aside other goods
6. The cold light source is loaded with the ultrahigh voltageshort arc mountain lamp,do not fierce vibration,be careful of transportation.
7. When do not u cold lightsources, should deposit toventilates and the dry place, and must add the safety mask..
