arkon硅片行业术语大全中英文对照I-Z
硅片行业术语大全(中英文对照 I-Z)
Ingot - A cylindrical solid made of polycrystalline or single crystal silicon from which wafer s are cut.
晶锭 - 由多晶或单晶形成的圆柱体，晶圆片由此切割而成。
Lar Light-Scattering Event - A signal pul that locates surface imperfections on a wafer.
激光散射 - 由晶圆片表面缺陷引起的脉冲信号。
Lay - The main direction of surface texture on a wafer.
层 - 晶圆片表面结构的主要方向。
Light Point Defect (LPD) (Not preferred; e localized light-scatterer) 光点缺陷(LPD) （不推荐使用，参见“局部光散射”）homework的音标
parkour怎么读
Lithography - The process ud to transfer patterns onto wafer s.
光刻 - 从掩膜到圆片转移的过程。
Localized Light-Scatterer - One feature on the surface of a wafer, such as a pit or a scratch that scatters light. It is also called a light point defect.
局部光散射 - 晶圆片表面特征，例如小坑或擦伤导致光线散射，也称为光点缺陷。
Lot - Wafer s of similar sizes and characteristics placed together in a shipment.
批次 - 具有相似尺寸和特性的晶圆片一并放置在一个载片器内。
Majority Carrier - A carrier, either a hole or an electron that is dominant in a specific region, such as electrons in an N-Type area.
多数载流子 - 一种载流子，在半导体材料中起支配作用的空穴或电子，例如在
N型中是电子。
mywife
Mechanical Test Wafer - A silicon wafer ud for testing purpos.
机械测试晶圆片 - 用于测试的晶圆片。
Microroughness - Surface roughness with spacing between the impurities with a measurement of less than 100 μm.
微粗糙 - 小于100微米的表面粗糙部分。
Miller Indices, of a Crystallographic Plane - A system that utilizes three numbers to identify plan orientation in a crystal.
Miller索指数 - 三个整数，用于确定某个并行面。这些整数是来自相同系统的基本向量。
Minimal Conditions or Dimensions - The allowable conditions for determining whether or not a wafer is considered acceptable.
最小条件或方向 - 确定晶圆片是否合格的允许条件。
Minority Carrier - A carrier, either a hole or an electron that is not dominant in a specific region, such as electrons in a P-Type area.
少数载流子 - 在半导体材料中不起支配作用的移动电荷，在P型中是电子，在
N型中是空穴。
Mound - A raid defect on the surface of a wafer measuring more than 0.25 mm.
堆垛 - 晶圆片表面超过0.25毫米的缺陷。
动漫设计培训Notch - An indent on the edge of a wafer ud for orientation purpos. 凹槽 - 晶圆片边缘上用于晶向定位的小凹槽。
Orange Peel - A roughened surface that is visible to the unaided eye. 桔皮 - 可以用肉眼看到的粗糙表面
Orthogonal Misorientation -
直角定向误差 -
Particle - A small piece of material found on a wafer that is not connected with it.
颗粒 - 晶圆片上的细小物质。
Particle Counting - Wafer s that are ud to test tools for particle contamination.
颗粒计算 - 用来测试晶圆片颗粒污染的测试工具。
Particulate Contamination - Particles found on the surface of a wafer. They appear as bright points when a collineated light is shined on the wafer.
颗粒污染 - 晶圆片表面的颗粒。
Pit - A non-removable imperfection found on the surface of a wafer. 深坑 - 一种晶圆片表面无法消除的缺陷。
Point Defect - A crystal defect that is an impurity, such as a lattice vacancy or an interstitial atom.
花椰菜的英文
点缺陷 - 不纯净的晶缺陷，例如格子空缺或原子空隙。
Preferential Etch -
优先蚀刻 -
Premium Wafer- A wafer that can be ud for particle counting, measuring pattern resolution in the photolithography process, and metal contamination monitoring. This wafer has very strict specifications for a specific usage, but loor specifications than the prime wafer.
测试晶圆片 - 影印过程中用于颗粒计算、测量溶解度和检测金属污染的晶圆片。对于具体应用该晶圆片有严格的要求，但是要比主晶圆片要求宽松些。
Primary Orientation Flat - The longest flat found on the wafer.
主定位边 - 晶圆片上最长的定位边。
Process Test Wafer - A wafer that can be ud for process as well as area cleanliness.
加工测试晶圆片 - 用于区域清洁过程中的晶圆片。
Profilometer - A tool that is ud for measuring surface topography. 表面形貌剂 - 一种用来测量晶圆片表面形貌的工具。
pennsylvaniaResistivity (Electrical) - The amount of difficulty that charged carriers have in moving throughout material.
电阻率（电学方面） - 材料反抗或对抗电荷在其中通过的一种物理特性。Required - The minimum specifications needed by the customer when ordering wafer s.
必需 - 订购晶圆片时客户必须达到的最小规格。
Roughness - The texture found on the surface of the wafer that is spaced very cloly together.
粗糙度 - 晶圆片表面间隙很小的纹理。
Saw Marks - Surface irregularities
锯痕 - 表面不规则。
四级考试时间Scan Direction - In the flatness calculation, the direction of the subsites.
扫描方向 - 平整度测量中，局部平面的方向。
Scanner Site Flatness -
局部平整度扫描仪 -
Scratch - A mark that is found on the wafer surface.
altogether擦伤 - 晶圆片表面的痕迹。
Secondary Flat - A flat that is smaller than the primary orientation flat. The position of this flat determines what type the wafer is, and also the orientation of the wafer.
第二定位边 - 比主定位边小的定位边，它的位置决定了晶圆片的类型和晶向。Shape -
皇帝英文形状 -
Site - An area on the front surface of the wafer that has sides parallel and perpendicular t
o the primary orientation flat. (This area is rectangular in shape)
