arni
自动落锁功能的调出 英文版及翻译
(适用于欧洲福特、台湾六合福特、重庆长安福特所有C1平台车型)
简单地翻译了一下，供大家参考
The enable/disable mode is entered when the following ries of steps is performed.
Install Time: Difficulty Level:
5 Minutes 1
Directions:
Step 1
Confirm that the perimeter alarm is disarmed.
确认车辆安全停放
Step 2
Clo all doors.
关闭所有车门
Step 3
Confirm that the ignition switch is in the OFF position.
Note: Steps 4 through 8 must be performed within 30 conds.
确认车辆点火开关处于关闭状态
allegiance注意：第四步骤到第八步骤必须在30秒内完成
Step 4
Turn the ignition switch from OFF to RUN.
将点火开关从关闭到打开状态（开关从I到II状态，不要着车）
Step 5
Press the power door lock UNLOCK button three times.
将车门锁从开到关连续按动3次（关-开-关-开-关-开）
Step 6
Turn the ignition switch from RUN to OFF.
将车辆点火开关从打开到关闭状态（从II到I）
Step 7
Press the power door lock UNLOCK button three times.
将车门锁从开到关连续按动3次（关-开-关-开-关-开）
Step 8
Turn the ignition switch from OFF to RUN.
将车辆点火开关从关闭到打开状态（从I到II）
对不起的英文Step 9
Verify that the RAP module chirps the horn. This indicates that the RAP module is now in the enable/disable mode and ready to accept program changes.
boat trip
这时行车电脑会发出短鸣声，说明行车电脑模块已经进入可编辑状态。
Step 10人教版高一数学课本
Press the power door lock UNLOCK button one time to command the RAP module to toggle the autolock/relock feature ON or OFF.
将车门锁从关到开一次（关-开），以触发行车电脑模块的自动锁生效或取消。
Step 11
6级真题skip什么意思Press the power door lock LOCK button once to enter the command.
将车门锁从关到开一次（关-开），（RAP）执行指令。
Step 12
Verify that the vehicle horn chirps one time to signal the RAP module confirmation of the command. There should only be one chirp indicating that the autolock/relock feature has been disabled. If one chirp is heard, followed by a longer honk, the autolock/relock feature has just been enabled. Return to step 10.免费日语翻译
这时会听到一声短鸣声，说明行车电脑模块指令已经执行。如果听到一声短鸣声，说明自动锁功能被取消，如果听到一声长鸣声，说明自动锁功能启动。重新执行第十步骤。
Step 13
Turn the ignition switch to the OFF position to exit the enable/disable mode.
将车辆点火开关转到关闭状态，退出编辑模式。
simsimStep 14
Verify that the RAP module chirps the horn once to indicate that a feature has been changed.autolabor
会再听到一声短鸣声，表示设置成功。
