编号中文名称英文名称
DIN
15551-3-1985 辐射敏感胶卷.硝酸纤维胶卷.术语、
特性、用途、贮存
Radiation nsitive films; cellulo
nitrate film; terminology, properties,
utilization, storage
DIN 16734-1986 与沥青不相容的人造纤维增强的增
塑聚氯乙烯(PVC-P)屋面毡.要求
Man-made fibre reinforced plasticized
polyvinyl chloride (PVC-P) roofing
felt incompatible with bitumen;
requirements
DIN 16737-1986 聚氯乙烯(PE-C)制的屋面毡和带编
织纤维内衬层的防水薄板材.要求
Chlorinated polyethylene (PE-C)
roofing felt and waterproofing sheet
with woven fabric inner layer;
requirements
DIN 16740-1976 玻璃纤维织物.电气用玻璃纤维织物.
交货技术条件
Textile glass; textile glass fabrics for
electrical purpos, technical delivery
specifications
DIN 16741-1976 玻璃纤维织物.电气用带边的玻璃纤
维织物带.交货技术条件
Textile glass; tapes with edges
consisting of textile glass fabrics for
electrical purpos, technical delivery
specifications
DIN 16867-1982 化工管路用玻璃纤维增强式聚酯树
脂管道、配件和接头.交货技术条件
Glass fibre reinforced polyester resin
(UP-GF) pipes, fittings and joints for
u in chemical pipelines; Technical
delivery conditions
DIN
16868-1-1994 玻璃纤维增强式不饱和聚酯树脂
(UP-GF)管材.第1部分：缠绕式和填充
式.尺寸
Glass fibre reinforced unsaturated
polyester resin (UP-GF) pipes - Part 1:
Wound, filled; dimensions
DIN
16868-2-1994 玻璃纤维增强式不饱和聚酯树脂
(UP-GF)管材.第2部分：缠绕式和填充
式.一般质量要求、检验
Glass fibre reinforced unsaturated
polyester resin (UP-GF) pipes - Part 2:
Wound, filled; General quality
requirements, testing
DIN
16869-1-1995 离心浇注玻璃纤维增强聚脂树脂管
(VP-GF).第1部分：尺寸
Centrifugally cast filled glass fibre
reinforced unsaturated polyester resin
(UP-GF) pipes - Part 1: Dimensions
DIN
16869-2-1995 离心浇注玻璃纤维增强聚脂树脂管
(VP-GF).第2部分：一般质量要求、检
验
Centrifugally cast filled glass fibre
reinforced unsaturated polyester resin
(UP-GF) pipes - Part 2: General
quality requirements, testing
DIN
16870-1-1987 纺织玻璃纤维增强环氧树脂管.尺寸
Wound glass fibre reinforced epoxy
resin pipes; dimensions
DIN 16871-1982 离心铸塑玻璃纤维增强环氧树脂管.
尺寸
Centrifugally cast glass fibre
reinforced epoxy resin (EP-GF) pipes;
Dimensions
DIN 16872-1993 热塑性塑料管道用管接头组件.玻璃
纤维增强的聚酯树脂(UP-GE)法兰.
Pipe joints asmblies for pipelines of
thermoplastics; glass fibre reinforced
尺寸polyester resin (UP-GF) flanges;
dimensions
DIN 16944-1988 玻璃纤维增强的反应型树脂模塑材
料.试验方法
Glass fibre reinforced reaction resin
moulding materials; test methods
DIN 16964-1988 绕制玻璃纤维增强聚酯树脂管.一般
质量要求和试验
Wound glass fibre reinforced polyester
resins (UP-GF) pipes; general quality
requirements and testing
DIN
16965-1-1982 绕制玻璃纤维增强聚酯树脂管
(UP-GF).A型管.尺寸
Wound glass fibre reinforced polyester
resin (UP-GF); pipes, Type A pipes,
dimensions
DIN
16965-2-1982 绕制玻璃纤维增强聚脂树酯管.B型
管.尺寸
Wound glass fibre reinforced polyester
resin (UP-GF); pipes, Type B pipes,
dimensions
DIN
16965-4-1982 纺织玻璃纤维增强聚脂树酯管.管、D
管型.尺寸
Wound glass fibre reinforced polyester
resin (UP-GF); pipes, Type D pipes,
dimensions
DIN
16965-5-1982 纺织玻璃纤维增强聚脂树酯管.管、E
管型.尺寸
Wound glass fibre reinforced polyester
resin (UP-GF); pipes, Type E pipes,
dimensions
DIN
16966-1-1988 玻璃纤维增强聚酯树脂(UP-GF)异型
件和连接件.第1部分：一般质量要求
和检验
Glass fibre reinforced polyester resin
(UP-GF) pipe fittings and joint
asmblies; fittings; general quality
requirements and testing
DIN
16966-2-1982 玻璃纤维增强式聚酯树脂管道配件
和接头.弯管.尺寸
Glass fibre reinforced polyester resin
(UP-GF) pipe fittings and joints;
Elbows, Dimensions
DIN
16966-4-1982 玻璃纤维增强聚酯树脂管(UP-GF)管
件和接头.三通喷管嘴尺寸
Glass fibre reinforced polyester resin
(UP-GF) pipe fittings an joints; Tees,
Nozzles, Dimensions
DIN
16966-5-1982 玻璃纤维增强聚酯树脂管(UP-GF)管
件和接头.缩径管.尺寸
Glass fibre reinforced polyester resin
(UP-GF) pipe fittings and joints;
Reducers, Dimensions
DIN
16966-6-1982 玻璃纤维增强聚酯树管(UP-GF)管件
和接头组件.卡圈、法兰、密封圈、尺
寸
Glass fibre reinforced polyester resin
(UP-GF) pipe fittings and joint
asmblies; collars, flanges, joint rings,
dimensions
DIN
16966-7-1995 玻璃纤维增强聚酯树脂管道连接件
及其组件.第7部分：套筒、法兰、法兰
连接和对接件.一般质量要求和试验
方法
Pipe joints and their elements of glass
fibre reinforced polyester resins - Part
7: Bushings, flanges, flanged and butt
joints; general quality requirements
and test methods
DIN
16966-8-1982 玻璃纤维增强聚酯管(UP-GF)管件和
接头.层压塑料接头.尺寸
Glass fibre reinforced polyester resin
(UP-GF) pipe fittings and joints;
Laminated joints; Dimensions
DIN
16967-2-1982 玻璃纤维增强环氧树脂(EP-GF)管件
和接头.弯管、三通管、尺寸
Glass fibre reinforced epoxy resin
(EP-GF) pipe fittings and joints;
Elbows, Tees, Dimensions
DIN
18089-1-1984 防火隔板.防火门填料.矿物纤维板
（毡）.定义、名称、要求、检验
Fire barriers; fillers for fire-doors;
mineral fibre boards (felts); definition,
designation, requirements, tests
DIN 18191-1980 作沥青路衬底的机织玻璃纤维织物
Woven glass fabric as inlay bituminous
sheeting
DIN 18192-1985 作沥青和聚合物沥青薄板镶嵌物的
粘合聚酯纤维毡.概念、标志、要求和
试验
Bonded polyester fleece ud as an
inlay for bitumen and polymer bitumen
sheeting; concept, designation,
requirements, testing
DIN
18204-1-2007 用纺织物和塑料薄膜(篷帐布)制造的
建筑物和帐篷罩部件.第1部分：涂聚
氯乙烯(PVC)的聚酯基底纤维
Components for enclosures made of
textile fabrics and plastic films
(awnings) for structures and tents -
Part 1: PVC coated polyester ba
fabric
DIN
18820-1-1991 承载构件用玻璃纤维增强非饱和聚
酯树脂和苯甲酰甲基树脂制层压塑
料(GF-UP、GF-PHA).第1部分：结构、
制造和特
Laminates of textile glass-reinforced
unsaturated polyester and phenacrylic
resins for load-bearing structural
members (GF-UP, GF-PHA); structure,
manufacture and characteristics
DIN
18820-2-1991 承载构件用玻璃纤维增强式非饱和
聚酯和苯酚树脂制层压塑料
(GF-UP.GF-PHA).第2部分：标准层压
塑料的物理参数
Laminates of textile glass-reinforced
unsaturared polyester and phenolic
resins for load-bearing structural
members (GF-UP, GF-PHA); physical
parameters for standard laminates
DIN
18820-3-1991 承载构件用玻璃纤维增强非饱和聚
酯树脂和苯甲酰甲基树脂制层压塑
料(GF-UP、GF-PHA).第3部分：承载层
压塑料的
Laminates of textile glass-reinforced
unsaturated polyester and phenacrylic
resins for load-bearing structural
members (GF-UP, GF-PHA);
protective measures for load-bearing
laminates
DIN
18820-4-1991 承载构件用玻璃纤维增强非饱和聚
脂树酯和苯甲酰甲基树脂制层压塑
料(GF-UP、GF-PHA).第4部分：试验和
质量控制
Laminates of textile glass-reinforced
unsaturated polyester and phenacrylic
resins for load-bearing structural
members (GF-UP, GF-PHA); tests and
quality control
DIN
19850-1-1996 污水管道用纤维水泥管和配件件.第1
部分：管，支管和弯头尺寸
Fibre cement pipes and fittings for
wers - Part 1: Dimensions of pipes,
branches and bends
DIN
19850-2-1996 纤维水泥污水管和接头.第2部分：接
头尺寸
Fibre cement pipes and fittings for
wers - Part 2: Dimensions of joints
DIN 2103-1993 办公室机器.油墨带.纺织纤维油墨带Office machines; inked ribbons; woven
fabric ribbons
DIN 28018-2006 玻璃纤维衬钢的压力容器.设备用
0.063-10立方米的生产设备用容器
Pressure vesls, glass lined steel -
Vesls for production plants 0,063
m<(hoch)3> up to 10 m<(hoch)3>
DIN 28019-2006 玻璃纤维衬钢的压力容器.12.5-125
立方米的储存用容器
Pressure vesls, glass lined steel -
Vesls for storage 12,5 m<(hoch)3>
up to 125 m<(hoch)3>
DIN
28091-2-1995 密封板的交货技术条件.第2部分：纤
维基密封材料.要求和试验
Technical delivery conditions for
gasket sheets - Part 2: Fibre-bad
gasket materials (FA); requirements
and testing
DIN
28136-11-1989 搅拌器.第11部分：玻璃纤维衬里的
CE 型公称容量为4000 升更换用刚
制搅拌器顶盖喷嘴的位置和尺寸
Agitator vesls; position and sizes of
cover nozzles for glass lined steel
agitator vesls, type CE, with a
nominal volume of 4000 litres for
replacement purpos
DIN
28145-6-1979 玻璃纤维衬里搅拌容器用焊接件.第6
部分：支架
Parts welded to glass lined agitator
vesls; bracket
DIN 29505-1987 航空航天.纤维增强的塑料构件.图纸
和零件清单的说明
Aerospace; components of fibre
reinforced plastics; indications in
drawings and parts lists
DIN 29965-1992 航空航天.碳纤维.碳纤维素长丝纱.技
术规范
Aerospace; carbon fibres; carbon fibre
filament yarns; technical specification
DIN 29971-1991 航空航天.不定向碳纤维环氧树脂薄
板和预浸渍带.技术规范
Aerospace; unidirectional carbon
fibre-epoxy sheet and tape prepreg;
technical specification
DIN 3068-1972 钢丝绳.6×24标准加7纤维芯的圆形
绞股钢丝绳
Steel wire ropes; round strand rope 6 ×
24 Standard + 7 fibre cores
DIN
3535-5-1993 煤气供气密封件：煤气管件和煤气设
备用橡胶、软木和合成纤维制密封材
料.安全性试验要求
Sealants for gas supply; aling
materials of rubber, cork and synthetic
fibres for gas armatures and gas
appliances; safety requirements, tests
DIN
3535-6-1999 供气用密封垫.第6部分：气阀、煤气设
备和煤气主管道用基于合成纤维、石
墨或聚四氟乙烯的密封垫材料
Gaskets for gas supply - Part 6: Gasket
materials bad on synthetic fibres,
graphite or polytetrafluoroethylen
(PTFE) for gas valves, gas appliances
and gas mains
DIN
40604-1-1965 硬化纤维.第1部分：板材、薄板材、条
材、带材
Vulcanized Fibre; Panels (Sheets),
Sheeting, Strips, Tapes
DIN
40604-2-1967
硬化纤维.第1部分：管材和棒材Vulcanized fibre; tubes and rods
DIN
40763-1-1988 镍镉蓄电池.带纤维结构板的电池.塑
料容器电池.标称容量、主要尺寸
Nickel-cadmium-batteries; cells with
fibre structured plates; cells in plastic
containers; nominal capacities, main
dimensions
DIN
40763-2-1990 镍镉蓄电池.带纤维结构板的电池.塑
料容器电池.放电电流、最终放电电
压、放电时间
Nickel-cadmium batteries; cells with
fibre structured plates; cells in plastic
containers; discharge current, final
discharge voltages, discharge time
DIN
4102-17-1990 建筑材料和构件的防火性能.第17部
分：矿物纤维绝缘材料熔点的测定.概
念、要求和检验
Fire behaviour of building materials
and elements; determination of melting
point of mineral fibre insulating
materials; concepts, requirements and
testing
DIN 4195-1976 筛底.丝或化学纤维纺织布.尺寸Screening surfaces; woven filament cloth of silk or man-made fibers, dimensions
DIN 52141-1980 用做屋顶和防水板防护层的玻璃纤
维毛状衬料.定义、名称、要求
Glass fibre fleece as layer for roof and
water-proof sheeting; definition,
designation, requirements
DIN 52142-1978 卷铺屋面料和防水屋面料的载体材
料玻璃纤维网.试验程序
Glass fibre mat as carrier material for
roll roofing and waterproofing; test
procedures
DIN 52187-1979 木材的检验.顺纤维方向的极限剪切
强度的测定
Testing of wood; determination of
ultimate shearing stress parallel to
grain
DIN 52271-1981 矿物纤维绝缘材料的检验.高温性能
Testing of mineral fibre insulating
materials; Behaviour at elevated
temperatures
DIN 52274-1986 矿物纤维绝缘材料检验.断裂强度.垂
直于绝缘层面的层间抗拉强度测定
Testing of mineral fibre insulating
materials; determination of
interlaminar tensile strength
perpendicular to plane of insulating
layer
DIN
52275-2-1978 矿物纤维绝缘材料的检验.测定直线
尺寸和体密度.管壳
Testing of mineral fibrous insulating
materials; determination of linear
dimensions and bulk density, casings
DIN 52316-1970 玻璃的检验.连续玻璃纤维长丝粗纱
的刚性测定
Testing of glass; determination of
stiffness of continuous filament glass
fibre rovings
DIN 53133-2006 纸板的试验.测定胶粘合波纹纤维板
的耐水性
Testing of board - Determination of
water resistance of glue bond of
corrugated fibreboard
DIN 53178-1969 色漆、清漆和类似涂料的检验.喷漆中
硝化纤维含量的测定
Testing of paints, varnishes and similar
products; determination of nitro
cellulo content of lacquers
DIN 53390-1988 玻璃纤维增强塑料的检验.单向玻璃
纤维增强层压塑料圆棒的弯曲试验
Testing of glass fibre reinforced
plastics; bending test on unidirectional
