maximum rvice temperature 最高使用ASME 常用词汇温度Abrasion allowance for 磨损，裕量strength of 强度Accessibility，pressure vesls 压力容器Brazing cleaning of brazed surfaces 钎焊，可达性钎焊的表面清理Access openings 通道孔fabrication by 用……制造Allowance for corrosion erosion or filler metal 填充金属abrasion 腐蚀裕量侵蚀或/磨损裕量fluxes 钎焊剂Applied linings tightness 应用衬
里密封性heads into shells 封头接入壳体Approval of new materials 新材料的批准operating temperature 操作温度Articles in Section V 第V 卷中的各章Buttstraps curvature 对接盖板，曲率Article 1 T-150 第1 章T150 forming ends of 成型端Article 2 第2章thickness and corrosion allowance 厚度Attachments 附件和腐蚀裕量lugs and fitting 支耳和配件welding ends of 焊接端lugs for platforms ladders etc. 平台，梯Carbon in material for welding 焊接用材料子等的支耳中的碳nonpressure parts 非受压件Cast ductile iron vesls design 可锻铸铁nozzles 接管容器，设计pipe and nozzle necks to vesl walls 在pressure-temperature limitations 压力-温器壁上的管子和接管颈度界限stiffening rings to shell 壳体上的刚性rvice restrictions 使用限制环Castings 铸件Backing strip 垫板carbon steel 碳钢Bending stress welded joints 弯曲应力，defects 缺陷焊接接头impact test 冲击试验Bend test 弯曲试验inspection 检查Blind flanges 盲板法兰quality factor 质量系数Bolted flange connections 螺栓法兰连接specifications 标准bolt lands 螺栓载荷Cast iron circular dished heads 铸铁碟形封bolt stress 螺栓应力头design of 关于设计Cast iron standard parts small 铸铁标准部flange moments 法兰力矩件，小件flange stress 法兰应力
Cast iron pipe fittings 铸铁管件materials 材料Cast iron vesls 铸铁容器studs 双头螺栓corners and fillets 圆角和倒角tightness of 紧密性head design 封头设计types of attachment 附件类型hydrostatic test 水压试验Bolts 螺栓nozzles and fittings 接管和配件Braced and stayed surfaces 支持和支撑面
pressure-temperatures limitations 压力-Brazed connections for nozzles 接管的钎焊温度界限连接Certificate of Authorization for CodeBrazed joints efficiency of 钎焊接头，焊Symbol Stamp 规范符号标志的认可证书缝系数Certification of material 材料证明书Certification of Nondestructive Personnel 却，焊后热处理无损检验人员证明书Corrosion allowance 腐蚀裕度Magnetic Particle Examination 磁粉检Corrosion resistant linings 防腐蚀衬里验Corrugated shells 波纹形壳体Liquid Penetrant Examination 液体渗透Corrugating Paper Machinery 波纹板机械检验Cover plates 盖板Radiographic Examination 射线超声检on manholes and handholes 在人孔和手验孔上的Ultrasonic Examination 超声检验spherically dished 球形封头Chip marks on integrally forged vesls 整Cracking stress corrosion 应力腐蚀裂缝体锻造容器上的缺口标志Cutting plates 板材切割Circumferential joints alignment tolerance Cylindrical shells supplementary loading环向连接，组对公差柱状壳体，附加载荷asmbling 装配thickness 厚度brazing 钎焊transition in 过渡段vesls subjected to external pressure 承Data report guide for preparation 准备数据受外压的容器报
告的指南Clad material inrted strips 覆层材料，嵌Defects in welded vesls repair 修理焊接条容器
中的缺陷examination 检查Definitions 定义Clad plate 复合板Design brazed vesls 设计钎焊容器Cleaning of brazed surfaces 钎焊表面清理
carbon and low alloy steel vesls 碳钢of welded surfaces 焊接表面及低合金钢容
器Clearance between surfaces to be brazed 钎cast ductile iron vesls 可锻铸铁容器焊表面间的间隙cast iron vesls 铸铁容器Combination of different materials 不同材clad vesls 覆层容器料组合ferritic steel vesls with properuts of methods of fabrication 制造方法enhanced by heat treatment 经热处理Computed working pressure from 后提高抗拉性能的铁素体钢容器hydrostatic tests 由水试验计算的工作压力forged vesls 锻造容器Conical heads 锥形封头high-alloy steel vesls 高合
金钢容器Conical ctions 圆锥截面loadings 载荷Connections bolted flange e Bolted multichamber vesls 多受压室容器flange connections连接，螺栓法兰（见螺nonferrous vesls 非铁金属容器栓法兰连接）welded vesls 焊接容器brazed 钎焊design pressure 设计压力clamp 卡箍Diameter exemption 直径的豁免expanded 胀接Dimensions checking of 尺寸，校核from vesls to safety valves 由容器至安Discharge of safety valves 安全阀泄放全阀Dished heads e formed heads 碟形封头studded 双头螺栓见成形封头threaded 螺纹Disks rupture 防爆膜welded 焊接Dissimilar weld metal 不同金属的焊接Cooling after postweld heat treating 冷Distortion of welded vesls 大变形、焊
接2容器fabrication 制造supports to prevent 用支撑防止head design 封头设计Drainage discharge from safety and relief heat treatment 热处理valves 排放，由安全阀和泄压阀泄放heat treatment verification tests 热处理Drop weight tests 落锤试验验证试验Eccentricity of shells
壳体的偏心度marking 标志Edges of plates metal removal from 由加materials 材料工板边去除金属stamping 标记tapered 锥度welded joints 焊接接头Efficiency around openings for welded Field asmbly of vesls 容器的现场安装attachments 焊缝系数，环绕焊接附件孔口Filler plugs for trepanned holes 锥孔的管塞Elasticity modulus of 弹性模量Fillet welds 角焊Electric resistance welding 电阻焊Fired process tubular heaters 直接火管式加Ellipsoidal heads 椭圆封头热炉Erosion allowance for 侵蚀裕量Fitting attachments 附件装配Etching of ctioned speciments 侵蚀，关Flange connections 法兰连接于截面试样Flange contact facings 法兰接触面solutions for examination for materials 检Flanges 法兰验材料的溶液bolted design 螺柱法兰设计Evaporators 蒸发器of formed heads for welding 用于焊接成Examination of ctioned speciments 剖面型封头试样的检验type of attachment 附件的类型of welded joints 焊接接头的检验Flat heads and covers unstayed 无支撑平Exemptions diameter and volume 直径和容封头和盖板积的豁免reinforcement of openings 开孔补强Expanded connections 胀接连接Flat spots on formed heads 成型封头上的External pressure tube and pipe 外压管平坦部分External pressure vesls
外压容器Flued openings 翻边开孔allowable working pressure for 许用工作Forged parts small 锻造部件，小的压力Forged vesls 锻造容器charts 算图heat treatment 热处理design of heads for 封头设计localized thin areas 局部薄壁区joints in shells of 壳体上的接头welding 焊接reinforcement for openings 开孔补强Forgings 锻件stiffening rings in shells 壳体上的刚性identification of 识别环Ultrasonic Examination 超声检验supports for 支承Form thickness of shell 壳体厚度manufacturer’s data report 制造厂数据reducers 变径段报告格式Fabrication brazed
vesls 制造，钎焊容器partial report 零部件数据报告Ferritic steels vesls with tensile proper Formed heads 成型封头ties enhanced by heat treatment design flued openings in 封头上翻边开孔经热处理后提高抗拉性能的铁素体钢容inrtion of welded vesls 插入，焊接容器，设计器joint efficiency 接头系数形，转角半径knuckle radius 转角半径Heads and shells 封头和壳体length of skirt 直边长度external pressure out-of-roundness 外on welded vesls 在焊接容器上压，不圆度reinforcement for openings 开孔补强openings through or near welded jointsForming
成型通过或靠近焊缝处的开孔ends of shell plates and buttstraps 壳体板roundness tolerance 不圆度公差和对接搭板端Heat exchangers 热交换器forged heads 锻造封头Heat treatment 热处理shell ctions and heads 筒节和封头by fabricator 由制造厂进行Furnaces 炉子carbon and low-alloy steel vesls 碳钢temperatures for postweld head treatment 和低合金钢容器焊后热处理温度ferritic steel v
esls with tensile propertiesFurnaces for heat treating 热处理炉enhanced by heat treatment 经过热处理后temperature control of 炉温控制提高抗拉性能的铁素体的容器Galvanized vesls 镀锌容器forged vesls 锻造容器Gasket materials 垫片材料furnaces 炉子Girth joints e circumferential joints 环high-alloy vesls 高合金容器缝接头见环向接头of test specimens 试样的热处理Handhole and manhole openings 手孔和人verification tests of 热处理验证试验孔开孔Hemispherical heads 半球形封头Head flange skirt length 封头翻边直边High pressure vesls 高压封头长度Holes 小孔Head joints 封头接头for screw stays 用于螺丝固定brazing 钎焊for trepanning plug ctions refilling 用welded 焊接于穿孔螺塞部分，再填充Head openings 封头开孔telltale 指示孔entirely in spherical portion 全部在球体unreinforced in welded joints 不补强，在部分焊缝上Head joints 封头接头Hubs on flanges 高颈，在法兰上concave and convex 凹面和凸面Hydrostatic proof tests 水压验证试验flat e flat heads 平板见平封头destructive 破坏性forged 锻造的prior pressure application 在升压之前formed e Formed heads 成型的见成Hydrostatic test 水压试验形封头cast iron vesls 铸铁容器forming 面型combined with pneumatic 与
气压试验混thickness after forming 厚度，成型之后合的Heads design conical 封头，设计，锥形enameled vesls 搪玻璃容器ellipsoidal 椭圆形external pressure vesls 外压容器hemispherical 半球形galvanized vesls 镀锌容器spherically dished 球
状碟形standard 标准toriconical 带折边的锥形welded vesls 焊接容器torispherical 带折边的球形Identification 识别torispherical knuckle radius 带折边的球of forging 锻件4 of plates 平板access to plant 在厂内应有的便利of welds 焊接control of stamping 打印管理Identification markers radiographs 识别标duties 职责志，射线照相facilities 装备Impact test 冲击试验qualification 资格certification 证明reports 报告properties 性能Installation 安装specimens 试样
pressure-relieving devices 泄压装置temperature 温度pressure vesl 压力容器Inspection 检查Integral cast iron dished heads 整体铸铁碟before asmbling 组装
之前形封头carbon and low-alloy steel 碳钢和低合integrally finned tubes 整体翅
片管金钢Internal structures 内部构件cast ductile iron vesls 可锻铸铁容器Jacketed vesls 夹套容器cast iron vesls 铸铁容器Joints 接头clad vesls 覆层
容器brazed 钎焊during fabrication 在制造期间circumferential e Circumferential joints ferritic steel vesls with tensile properties efficiency brazed 环缝见环向接头系数，enhanced by heat treatment 经过热处理后钎焊提高抗拉性能的铁素体的容器welded 焊接fitting up 组对electric resistance butt welding 电阻，对forged vesls 锻造容器接焊heat treatment forgings 热处理，锻件in cladding and applied linings 在覆层及high-alloy steel vesls 高合金钢容器衬里magnetic particle 磁粉in vesls s
ubjected to external pressure material 材料在承受外压的容器nonferrous vesls 非铁金属容器lap e Lap joints 搭接见搭接接头plate 板材longitudinal e Longitudinal joints 纵postweld heat treatment 焊后热处理向见纵向接头pressure vesls accessibility 压力容器，tube-to-tubesheet 管子对管板可达性Jurisdictional Review 权限审查quality control 质量管理Knuckles 过渡圆角ctioning of welded joints 焊接接头的radius 半径剖面检验transition ction 变径段spot examination 抽样检查Lap joints 搭接接头steel castings 铸钢件amount of overlap 搭接量surfaces expod and component parts 暴brazed 钎焊露的表面和元件部分longitudinal under external pressure 在外test specimens 试样压作用下纵向的vesls 容器welded 焊接vesls exempted from 免检容器Laws Covering Pressure Vesls 涉及压力welded vesls 焊接容器容器的法规Inspection openings 检查孔Lethal gas or liquids 致命的气体或液体Inspectors 检查师Ligaments efficiency of 孔.
