第一部分
日常用语：Daily English
Ⅰ：问候、介绍、告别（ Greetings、introductions and farewells）
1、I’m a fitter (electrician、piper ). 钳工、电工、管子工
2、He is an inspector(QC). 检验员
3、Welcome to our shipyard.
Ⅱ：致谢、道歉（Gratitude and Apologies）
1、Do me a favour, plea. 请多帮忙
2、When shall we deliver it 提交
3、Plea wait a moment.
4、Will this way take me to the foreign office 外事办
5、Right-about-face向后转
Ⅲ Life in the yard
1、Have you got ud to the life here
2、Plea hold the handrails well. 请抓好扶手
3、Plea u your intercom.（walkie-talkie）对讲机
4、How about quality 质量怎么样
5、There’s something wrong with the drawing.
6、Sorry, It’s my fault. 是我的过错
7、Don’t worry. That’s easy to deal with.
8、Let’s start to check some items. 开始验收吧
9、Are you satisfied with it
10、The vibration (temperature、pressure、speed) is normal. 振动（温度、压力、速度）是正常
11、Sorry, it has not been finished yet.
12、Submission (Delivery) is Okay. 提交（验收）成功
常用句型 Common Patterns
1、That is an exhaust valve. 排气阀
2、The are blowers. 鼓风机
3、There are ten workers in our group.
4、He is a technician. 技术员
5、I am a fitter. 钳工
6、When shall we have a check
7、Will you plea give me a hand
第二部分管子部分
Ⅰ.管子加工后提交用语：Delivery expressions after pipe processing
1、Which system is this pipe for
2、How many pipes are there altogether
3、What’s the designed test pressure It is 12 kilograms/cm2
设计规定的试验压力是多少 12公斤/厘米2。
4、How about the accuracy of this pressure gauge When did you calibrate it
这压力表准不准确什么时候校验的
5、Is the owner’s reprentative here now船东来了没有
6、When will the surveyors be here验船师什么时候来
7、Have your inspectors checked it Any problems 你们分厂的检验员看过没有有什么问题
8、The welding is uneven and needs some remedy.焊角尺寸不均匀，需要修补。
9、There is an air hole here. Plea scrape it and have a repair.这里有气孔，需挖掉后再修补。
10、There is a izing here. Reweld it plea. 这里有咬口，需焊补。
11、The inside of the pipe needs grinding.管子内部需打磨。
12、The inside of the pipe needs welding and grinding. 管子内部需补焊打磨。
13、The inside of the branch pipe needs welding and grinding. 支管内部需补焊打磨。
14、Plea grind it once more.打磨不够，再磨以下。
15、The am of the pipe at is not welded thoroughly and needs welding and grinding.
管座焊缝未焊透，需补焊打磨。
16、The am of the reducer connection is not welded thoroughly and needs welding and grinding.
异径接头缝未焊透，需补焊打磨。
17、The am of the bend is not welded thoroughly and requires welding and grinding.
定型弯缝未焊透，需补焊打磨。
18、The welding part is too thin and needs rewelding. 电焊太薄，需补加电焊。
19、Now I’ll have to go on board. I will have a check this afternoon.现在我有事需上船，下午
再来检验。
20、The pressure test is over. Now d ecrea the pressure , dismantle the pipe and check the inside
of the pipe.
压力试验通过了，把压力放掉，拆开管子，检查管子内部。
21、What’s to be done after water pressure test Acid flushing or galvanizing
水压试验后怎么处理，是酸洗还是镀锌
22、The pipes need photoing and inspecting.这些管子需拍片和探伤。
23、I’ll check the material certificate of the pipe. 我要这管子的材质证书。
24、I’d like to e the material certificate of the flange. 我要看这法兰的材质证书。
25、The pipes have been checked and can be stamped.这些管子已通过验收，可以打钢印了。
26、Is there any leaking here 这里是否漏水
Ⅱ. 船舶管系提交一般用语 for the delivery of the piping system
1、先生，麻烦给我看一下缺陷可以吗Sir, could you show me the defect
2、现在可以启动泵吗May I start the pump now
3、我们开始做实验吧 Let’s begin the test.
4、这个系统没问题吧 Is there any trouble for this system
5、压力太低（高） The pressure is too low (high).
6、温度太低（高） The temperature is too low (high).
7、流量太小（大） The flow is too little (much).
8、真空度太小 The pressure in the vacuum is too low.
9、旁通阀关闭 The by-pass valve is clod.
10、我们到上面（下面、前面、后面）去看看。
Let’s go upward (downward、forward、backward) to have a check.
11、能否让我叫个翻译来解释一下 Shall I ask an interpreter to explain it to you
12、你要看一下图纸吗 Would you like to have a look at the drawing
13、这根管子的通径是1500mm。 The diameter of this pipe is 1500mm.
14、这个系统的原理没有问题。 The principle of this system is okay.
15、安装的位置是可以的，便于操作。 The installation position is proper and easy for operation.
16、我们会按照你的意思改一下 We’ll make a change according to your request.
17、让我们到隔壁舱室去看一下。 Let’s go to the next hold (space, room, cabin) to have a look.
18、垫片换新 Renew the washers.
19、法兰平面贴合不好。The surface of flanges don’t fit well.
20、管子镀锌 Galvanize the pipes.
21、管子油漆 Paint the pipes
22、螺丝扳紧 Tighten the screw.
23、消防管（压载管 / 日用空气管 / 日用淡水管）密性试验
The tightness test for fire pipes (ballast pipes / rvice air pipes / rvice . pipes).
24、喷淋装置试验。 The test of spraying and flushing equipment.
Ⅲ. 船舶管系各系统完整性、密性提交用语 for the completeness and tightness of the piping system.
1、请把垃圾清除干净 Plea clear the rubbish.
2、请保持良好通风，并且要做气爆测试 Plea keep good ventilation and do the gas explosion test.
3、请把系统的完工图提供给我们 Plea provide us with the finished plan of this system.
4、请把这个穿舱件改成水密的 Plea change this penetrating piece into water tight construction.
5、把这个阀件拆下检查其是否为截止（止回）阀
Plea disconnect this valve to e is it is a non-return valve.
6、这个阀（设备、附件）没有船级社检验钢印，需要补做。
This valve (equipment、accessory) hasn’t been affirmed or stamped by the classification
society.
7、这一支管通径（开的位置，外部涂装）不对，一定要按照图纸施工。
The diameter (opening position ,outer painting) of this branch pipe is not correct. It must
be fabricated in accordance with the drawing.
8、这路管子不应该穿过油舱（水密舱、人形通道、电缆管）的上方，必须改正以防止事故发生。
This pipe must not pass through from above oil tanks (water-tight compartments、passageways or cables) to prevent any accidents from occurring.
9、焊接（打磨）太糟糕了 The welding (grinding) is too bad (too poor).
10、压力表在哪里安装的位置不合理。
Where’s the pressure gauge The installation position is not reasonable.
11、这个箱柜居然没有安装泄放阀。 Why didn’t you fit a drain valve on this tank
12、这样布置，对今后操作和维修带来不便。
Such an arrangement is inconvenient to the future operation and maintenance.
13、设备上的好多附件、接口和控制箱怎么都没有铭牌一定要补做。 There are not any nameplates
on so many accessories, connections and control boxes. I want to know why.
14、请把压力表拆下来检验“O”位。Plea remove the pressure gauge to calibrate its “zero”
position.
15、检查期间请停掉泵浦，拆掉升压管。
Plea stop the pumps and disconnect the booster pipes during the inspection.
16、这个阀件关不死，请修理或调换。
This valve cannot be clod tightly. Plea repair it or have it changed.
17、管路末端要拆下来并且用水把里面的垃圾冲干净。
Plea disconnect the pipe ends and flush it with water.
