《汽车实用英语复习2.句子翻译

更新时间:2023-05-08 13:36:08 阅读: 评论:0

《汽车实用英语复习2.句子翻译
第一篇:《汽车实用英语复习2.句子翻译
《汽车实用英语》句子翻译共分两部分,1、汉译英
2、英译汉
请翻译一下句子。注意:除特别注释外,英汉都要记哦。
Unit 1P9-10
1.汽车主要由四个部分组成,它们是:发动机、底盘、车身和电气设备。
The automobile consists of 4 parts.They are: engine, chassis, body and electrical equipment.2.传动系由离合器、变速箱、传动轴、后桥、差速器、从动轮组成。
The transmission system consists of clutch, gearbox, propeller shaft, real axle and differential and the driving road wheels.3.制动系统的功能之一是使汽车能在尽可能短的距离内停车。
One function of the braking system is to stop the car in as short a distance as possible.4.内燃机,顾名思义,就是燃料在气缸内部燃烧,并且把燃烧时的膨胀力转化为驱动车辆的旋转力。
As its name indicates, it obtains power by burning the fuel within the cylinders and converts the expanding force of the combustion into rotary forced ud to propel the vehicle.Unit 2P26
5.The following discussion broadly outlines how a basic or conventional Electronic Fuel
Injection system operates.下面对一般的电控燃油喷射系统地工作原理做基本介绍。
6.As fuel is sprayed into the intake airstreams, it mixes with the incoming air and vaporizes due
to the low pressure in the intake manifold.(英译汉)
当燃油被喷射到进气空气流中时,燃油就同进来的空气混合在一起,由于进气歧管里的低气压而蒸发。
7.进气系统由空气滤清器、空气流量计、节气门、空气进气室、进气歧管和进气门组成。
The air induction system consists of the air cleaner, air flow meter, throttle valve, air intake chamber, intake manifold runner, and intake valve.8.节气门开得时间越长,进入发动机气缸里的气体就越多。
As the trottle valve is opened further, more air is allowed to enter the engine cylinder.Unit 3 P 40-
419.The valve spring provides the force necessary to clo the valve and hold it tightly against its
at.(英译汉)
气门弹簧提供气门关闭时所需要的作用力,保证气门与气门座紧密贴合。
10.气门由头部和杆部组成。
A valve consists of a head and stem.11.配气机构由正时齿轮、凸轮轴、挺杆、气门、带有
锁止装置的气门弹簧和气门导管组成。The valve train is compod of timing gears, a camshaft, tappets, valves,springs with fasteners
and valve guides.12.凸轮轴的功用是按特定的顺序准确适时地打开气门并通过气门弹簧的回位作用控制气
门的关闭。(英译汉)
Camshaft’s function is to open the engine valves positively and timely, in a definite quence, and to control their closing against the return action of the valve springs.13.摇臂的一端安装调整螺钉,用来调节摇臂与气门杆尾段之间的气门间隙。(英译汉)One end of the rocker arm has a threaded hole to receive the adjusting screw ud to t the valve clearance between the rocker contract pad and the valve stem tip.Unit 4P56-57
14.离合器是一种用以连接和分离发动机和变速器的装置。
The clutch is a device ud to provide smooth engagement and dingagement of the engine and the transmision.15.装有自动变速器的汽车一般不需要离合器。
Cars equipped with automatic transmissions normally do not have a clutch.16.Although there are many types of clutch, the dry single plate type is ud almost exclusively
in pasnger cars.(英译汉)
虽然离合器种类很多,但干式单片离合器大多专用于乘用车。
17.When the car is on straight road, the ring gear, differential ca, differential pinion gears and
two differential side gears all turn as a unit without any relative motion.(英译汉)
汽车直线行驶时,齿圈、差速器壳、差速器行星齿轮和两个差速器半轴齿轮作为一个整体运转,而无任何相关运动(自转)。
18.The pressure on driven disk fitted onto the splined portion of shaft is provided by springs
installed between the housing the pressure driving disks..(英译汉)
作用于安装在轴的花键部分的从动盘的压力来自壳体与驱动压盘之间的弹簧。
19.The drive shaft, or propeller shaft, connects the transmission output shaft to the differential
pinion shaft.驱动轴或传动轴连接变速器输出轴和差速器(行星齿轮轴)。
20.The universal joint or U-joints is ud to connect the drive shaft to the trasmission output shaft
and the differentail pinion gear shaft.万向节用来连接驱动轴和变速器输出轴以及差速器(行星齿轮轴)。
Unit 5P 7
221.变速器是用类改变发动机曲轴送到驱动轴的转矩,完成倒车并在汽车长时间停车或滑行
时分离发动机和动力传动系统的装置。
The transmission is designed for changing the torque transmitted from the engine crankshaft to the propeller shaft, reversing the vehicle movement and dingaging the engine from the drive line for a long time at parking or coasting.22.机械变速器有外壳、输入轴和齿轮、输出轴和齿轮、堕轮、反转轮(倒档齿轮)、齿轮
组和换挡装置组成。
The manual transmission consists of a housing, an input shaft and gear, an output shaft and gear, an idler shaft, a rever gear, a cluster of gears and a gear shift mechnism.23.换挡装置用来啮合齿轮,实现置于空挡和倒档。
The gear shift mechanism is designed for engaging gears, tting them neutral and engaging the rever speed.Until 7 P106-107
24.齿条从两侧伸出来,与拉杆连接。
Each end of the rack protrudes(from the tube)and connects to a rod, called tie rod.或:The rack protrudes from both sides and connects to the rods.25.轻便型和小型车不必过多
地考虑其转向轻便问题。

本文发布于:2023-05-08 13:36:08,感谢您对本站的认可!

本文链接:https://www.wtabcd.cn/fanwen/fan/90/100679.html

版权声明:本站内容均来自互联网,仅供演示用,请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系,我们将在24小时内删除。

标签:气门   齿轮   汽车   驱动
相关文章
留言与评论(共有 0 条评论)
   
验证码:
Copyright ©2019-2022 Comsenz Inc.Powered by © 专利检索| 网站地图