画妈妈的图片大全
Mudline Suspension System
Type MS-10
TYPE MS-10
MUDLINE HANGERS AND TOOLS
OPERATIONAL FEATURES
Page 1
MS-10 MUDLINE SUSPENSION SYSTEM
FEATURES & BENEFITS
MS1150898®
DRILLING PHASE Shoulder Hangers •
Patented load ring provides high load capacity at the landing ring/shoulder interface by providing full circumference bearing while maintaining a large flow-by area.
•
Running and tting of Shoulder Hangers is accomplished in a single trip.
•
All Shoulder Hangers are
simple weight t designs. No rotation or lifting is required to t the hangers.
在水之涘怎么读
•
The 13-3/8" mudline Shoulder Hanger is equipped with a left hand running thread and a right hand tie-back thread. Mudline Shoulder Hangers 16" and larger u a single left hand running thread for running and tie-back.
•
Resilient primary and backup als are provided between the running tool and hanger.
Page 2
MS-10 MUDLINE SUSPENSION SYSTEM
FEATURES & BENEFITS MS1150898
TYPE MS-10
莫负好时光
MUDLINE HANGERS AND TOOLS
OPERATIONAL FEATURES
®
Split Ring Hanger •
Patented multi-load shoulder split ring design provides for high load capacity at the outer hanger - inner hanger load mechanism and provides high pressure capacity due to mini-mum split ring travel.
•
Integral load ring provides high load capacity at the split ring/hanger interface by providing full circumference bearing
名字四个字while maintaining 10 sq. inches of flow-by.
•
Patented detent ring design eliminates premature vertical movement of the split ring and provides automatic re-tting while eliminating shear pins.•
Running and tting of hangers is accomplished in a single trip.
•
All hangers are simple weight t designs. No rotation or lifting is re-quired to t the hangers.
•
During the weight t process, the inner hanger body and detent ring force the split ring into full engagement with the outer hanger and provide for positive back-up of the split ring.
•
The multi-load shoulder split ring design allows an area for drill cuttings outside and above the teeth.
方觉•
Each casing hanger 13-3/8" and under are equipped with a left hand running thread and a right hand tie-back thread. Hangers 16" and larger are equipped with running threads only.
TYPE MS-10
MUDLINE HANGERS AND TOOLS
OPERATIONAL FEATURES
Page 3
MS-10 MUDLINE SUSPENSION SYSTEM
FEATURES & BENEFITS
MS1150898®
Running Tools •
Right hand rotation releas the running tool.
•
Washout ports are located in the Running Tool, not in the hanger body, providing high pressure,trouble free tie-backs.•
中国十大名茶排名Two resilient als are located above the washout ports in order to assure real after wash out.
•
Five (5) turns are required for wash out and nine (9) turns for relea of running tool from the casing hanger.
•
Threads are coar 3-pitch square thread design for mini-mum torque.
欧诺拉公主•
A one-way rubber al is located at the bottom, except on 16" and larger of the running tool to
protect the tie-back al area and threads. This al stays engaged in the al bore during wash out to keep well fluids from entering the thread and al areas.•
All Running Tools are fully aligned prior to thread contact to prevent crossthreading if the tool must be remotely stabbed.
Page 4
MS-10 MUDLINE SUSPENSION SYSTEM
FEATURES & BENEFITS MS1150898
TYPE MS-10
MUDLINE HANGERS AND TOOLS
OPERATIONAL FEATURES
®
Hanger Profile Clean Out Tool •
Notched split ring provides thorough and complete cleaning of profile.
桑叶的功效和作用•
Indicator ring verifies complete clean out.
•
Simple tool operation includes run in, land in profile, rotate to the right to clean, lift slightly and wash out through ports, lift to retrieve and check indicator to verify full clean out of profile.
ABANDONMENT PHASE Temporary Abandonment Caps •
All caps are completely covered by the next outer cap.
•
The inner most cap contains a back pressure valve for contain-ing well pressure, with monitor-ing and relea through drill pipe without the u of wireline.
