DuPont™ Delrin®
acetal resin
Delrin® 500P NC010
Delrin® 500P NC010 is a medium viscosity acetal homopolymer resin for injection molding. Delrin® 500P has improved processing thermal stability.
Property Test Method Units Value
Identification
Resin Identification ISO 1043POM
Part Marking Code ISO 11469>POM< Mechanical
Yield Stress ISO 527MPa (kpsi)70 (10.1)
Yield Strain ISO 527%17
Strain at Break ISO 527%
50mm/min40
Nominal Strain at Break ISO 527%30
Tensile Modulus ISO 527MPa (kpsi)3100 (450)
Tensile Creep Modulus ISO 899MPa (kpsi)
1h2800 (406)
1000h1600 (232)
Flexural Modulus ISO 178MPa (kpsi)2900 (420)
ye字开头的成语Flexural Stress ISO 178MPa (kpsi)
@ 3.5% Strain80 (11.6)
Notched Charpy Impact Strength ISO 179/1eA kJ/m2
-30°C (-22°F)8
23°C (73°F)9
Unnotched Charpy Impact Strength ISO 179/1eU kJ/m2
-30°C (-22°F)220
23°C (73°F)300
Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc.
ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm.
勤学故事
Test temperatures are 23°C unless otherwi stated.
The DuPont Oval Logo, DuPont™, The miracles of science™ and Delrin® are trademarks or registered trademarks of DuPont Company. Copyright© 2006.
061121/061121 The information provided in this data sheet corresponds to our knowledge on the su
bject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated; the
data may not be valid for such material ud in combination with any other materials, additives or pigments or in any process, unless expressly indicated otherwi.
The data provided should not be ud to establish specification limits or ud alone as the basis of design; they are not intended to substitute for any testing you may
need to conduct to determine for yourlf the suitability of a specific material for your particular purpos. Since DuPont cannot anticipate all variations
in actual end-u conditions DuPont makes no warranties and assumes no liability in connection with any u of this information. Nothing in this publication
is to be considered as a licen to operate under or a recommendation to infringe any patent rights. DuPont advis you to ek independent counl for a freedom to practice opinion on the intended application or end-u of our products. CAUTION: This product is not permitted to be sold for u in medical applications
involving any implantation in the human body or where contact with internal body fluids or tissues will equal or exceed 24 hours. For applications involving
contact of less than 24 hours, e “DuPont Medical Caution Statement", H-50102 and contact your DuPont sales reprentative.
Delrin® 500P NC010
Property Test Method Units Value
Thermal
Deflection Temperature ISO 75-1/-2 °C (°F)
0.45MPa158 (316)
1.80MPa94 (201)
Melting Temperature ISO 11357-1/-3 °C (°F)
10°C/min178 (352)
CLTE, Parallel ISO 11359-1/-2E-4/C (E-4/F)
沈三白-40 - 23°C (-40 - 73°F) 1.0 (0.56)
23 - 55°C (73 - 130°F) 1.1 (0.61)
55 - 100°C (130 - 212°F) 1.5 (0.82)
苏州少年宫CLTE, Normal ISO 11359-1/-2E-4/C (E-4/F)
-40 - 23°C (-40 - 73°F) 1.0 (0.56)
23 - 55°C (73 - 130°F) 1.1 (0.61)
55 - 100°C (130 - 212°F) 1.6 (0.9)
Vicat Softening Temperature ISO 306 °C (°F)
50N157 (315) Rheological
Melt Mass-Flow Rate ISO 1133g/10 min
190°C, 2.16kg15
Electrical
Surface Resistivity IEC 60093ohm1E15
Volume Resistivity IEC 60093ohm m1E12
Electric Strength IEC 60243-1kV/mm (V/mil)
1.0mm33 (838)
Relative Permittivity IEC 60250
1E2 Hz 3.9
1E6 Hz 3.9
Dissipation Factor IEC 60250E-4
1E2 Hz200
1E6 Hz60
CTI IEC 60112V600
Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc.
ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm.
Test temperatures are 23°C unless otherwi stated.
The DuPont Oval Logo, DuPont™, The miracles of science™ and Delrin® are trademarks or registered trademarks of DuPont Company. Copyright© 2006.
061121/061121 The information provided in this data sheet corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated; the
data may not be valid for such material ud in combination with any other materials, additives or pigments or in any process, unless expressly indicated otherwi.
The data provided should not be ud to establish specification limits or ud alone as the basis of design; they are not intended to substitute for any testing you may
need to conduct to determine for yourlf the suitability of a specific material for your particular purpos. Since DuPont cannot anticipate all variations
in actual end-u conditions DuPont makes no warranties and assumes no liability in connection with any u of this information. Nothing in this publication
没问题英语怎么说
is to be considered as a licen to operate under or a recommendation to infringe any patent rights. DuPont advis you to ek independent counl for a freedom to practice opinion on the intended application or end-u of our products. CAUTION: This product is not permitted to be sold for u in medical applications
involving any implantation in the human body or where contact with internal body fluids or tissues will equal or exceed 24 hours. For applications involving
contact of less than 24 hours, e “DuPont Medical Caution Statement", H-50102 and contact your DuPont sales reprentative.
Delrin® 500P NC010
Property Test Method Units Value
Flammability
Flammability Classification IEC 60695-11-10
0.75mm HB
Flammability Classification UL94
0.75mm HB
Oxygen Index ISO 4589-1/-2%22
High Amperage Arc Ignition Resistance UL 746A arcs
0.75mm200
Hot Wire Ignition UL 746A s
0.75mm8
1.5mm11
3.0mm15 Temperature Index
RTI, Electrical UL 746B°C
0.75mm50
1.5mm110
3.0mm110
RTI, Impact UL 746B°C
0.75mm50
1.5mm85
3.0mm90
RTI, Strength UL 746B°C
0.75mm50黄体酮
1.5mm90
3.0mm95
Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc.
ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm.
Test temperatures are 23°C unless otherwi stated.
The DuPont Oval Logo, DuPont™, The miracles of science™ and Delrin® are trademarks or registered trademarks of DuPont Company. Copyright© 2006.
061121/061121 The information provided in this data sheet corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated; the
data may not be valid for such material ud in combination with any other materials, additives or pigments or in any process, unless expressly indicated otherwi.
The data provided should not be ud to establish specification limits or ud alone as the basis of design; they are not intended to substitute for any testing you may共产主义的含义
need to conduct to determine for yourlf the suitability of a specific material for your particular purpos. Since DuPont cannot anticipate all variations
in actual end-u conditions DuPont makes no warranties and assumes no liability in connection with any u of this information. Nothing in this publication
is to be considered as a licen to operate under or a recommendation to infringe any patent rights. DuPont advis you to ek independent counl for a freedom to practice opinion on the intended
application or end-u of our products. CAUTION: This product is not permitted to be sold for u in medical applications
involving any implantation in the human body or where contact with internal body fluids or tissues will equal or exceed 24 hours. For applications involving
contact of less than 24 hours, e “DuPont Medical Caution Statement", H-50102 and contact your DuPont sales reprentative.
Delrin® 500P NC010
Property Test Method Units Value
Other
Density ISO 1183kg/m3 (g/cm3)1420 (1.42)
Hardness, Rockwell ISO 2039/2
Scale M92
Scale R120
Water Absorption ISO 62, Similar to%
Equilibrium 50%RH0.3
Immersion 24h0.6
Saturation, immerd 1.4
Molding Shrinkage ISO 294-4%
Normal, 2.0mm 1.9
Parallel, 2.0mm 2.0
Processing
Melt Temperature Range °C (°F)210-220 (410-430)
Melt Temperature Optimum °C (°F)215 (420)
Mold Temperature Range °C (°F)80-100 (175-210)
Mold Temperature Optimum °C (°F)90 (195)
Drying Time, Dehumidified Dryer h2-4
Drying Temperature °C (°F)80 (175)
Processing Moisture Content%<0.2
Hold Pressure Range MPa (kpsi)80-100 (12-15)
Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc.
ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm.描写花的优美段落
Test temperatures are 23°C unless otherwi stated.
The DuPont Oval Logo, DuPont™, The miracles of science™ and Delrin® are trademarks or register
ed trademarks of DuPont Company. Copyright© 2006.
061121/061121 The information provided in this data sheet corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated; the
data may not be valid for such material ud in combination with any other materials, additives or pigments or in any process, unless expressly indicated otherwi.
The data provided should not be ud to establish specification limits or ud alone as the basis of design; they are not intended to substitute for any testing you may
need to conduct to determine for yourlf the suitability of a specific material for your particular purpos. Since DuPont cannot anticipate all variations
in actual end-u conditions DuPont makes no warranties and assumes no liability in connection with any u of this information. Nothing in this publication
is to be considered as a licen to operate under or a recommendation to infringe any patent rights.
DuPont advis you to ek independent counl for a freedom to practice opinion on the intended application or end-u of our products. CAUTION: This product is not permitted to be sold for u in medical applications
involving any implantation in the human body or where contact with internal body fluids or tissues will equal or exceed 24 hours. For applications involving
contact of less than 24 hours, e “DuPont Medical Caution Statement", H-50102 and contact your DuPont sales reprentative.
