采购专员拉伸应力:tensile stress
拉伸屈服应力:tensile stress at yield
拉伸断裂应力:tensile stress at break
拉伸强度:tensile strength
拉伸应变:tensile strain智者生存
拉伸屈服应变:tensile strain at yield
拉伸断裂应变:tensile strain at break
拉伸弹性模量:modulus of elasticity in tension
应力—应变曲线:stress-strain diagram
断裂伸长率:elongation rate at break
穿透裂纹:through crack
准确度:accuracy
校准:calibration
参考标准:reference standard
标距:gauge length
试验速度:test speed
压缩应力:compressive stress
屈服压缩应力:compressive stress at yield
压缩强度:comprehensive strength
破坏时的压缩应力:compressive stress at break
X%应变时的压缩应力:compressive stress at x%
压缩应变:compressive strain
标称压缩应变:nominal compressive strain
标称压缩屈服应变:nominal compressive yield strain
压缩强度时的标称压缩应变:nominal compressive strain at compressive strength
破坏时的标称压缩应变:nominal compressive strain at break
压缩模量:compressive modulus
初期硫化时间:pre-vulcanization time
焦烧时间:scorch time
剪切模量:shear modulus
热浸镀锌层:hot dip galcanized coating
热浸镀锌:hot dip galcanizing
镀层的镀覆量:coating mass
镀层厚度:coating thickness
主要表面:signficant surface
样本:control sample
基本测量面:reference area
镀层局部厚度:local coating thickness
镀层平均厚度:mean coating thickness
镀层的局部覆盖量:local coating mass
镀层的平均镀层量:mean coating mass
最小值:minimum value
媳妇的美好宣言
检查批:inspection lot
验收检查:acceptance inspection
漏镀层:uncoated areas
极限状态:limit states
可靠度:degree of reliability
设计基准期:design reference period
设计状况:design situation
材料强度设计值:design value of material strength
作用:action
作用效应:effects of actions
作用标准值:characteristic value of an action
作用设计值:design value of an action
作用效应组合:characteristic for action effects
安全等级:safety class
结构重要性系数:coefficient for importance of a structure
几何参数标准值:什么叫真分数nominal value of geometrical parameter
承载力设计值:design value of ultimate bearing capacity
作用效应组合设计值:design value of combination for action effects
save过去式商务着装作用长期效应组合:comnination for long-term action effects
开裂弯矩:cracking moment
作用频遇值:frequent value of an action
分项系数:partial safety factor
施工荷载:site load
伸缩缝: Expansion and contraction joint
伸缩装置:composite expansion and contraction installation
伸缩量:expansion and contraction quantity
伸缩体:expansion and contraction body
横向错位:transver stagger
竖向错位:vertical stagger
纵向错位:congitudinal stagger
破坏: breaking
屈曲: buckling
压缩性能:compressive properties
压-剪试验装置:compressive-shear testing machine
橡胶保护层:cuver rubber
尽量的英文
设计压应力:design compressive stress
有效承压面积:家乡代言人effective loaded area
有效宽度:effective width
隔震橡胶支座:elastomeric isolator
普通橡胶支座:normal rubber bearing
第一形状系数:1st shape factor
第二形状系数:2nd shape factor
天然橡胶支座:linear natural rubber bearing
铅芯橡胶支座:lead rubber bearing
高阻尼橡胶支座:high damping rubber bearing