考研各科分数Quality test standard/method | Criteria（标准） | Results |
1.labeling / Design/Features（标签/设计特点） | The actuality must keep consistency（一致性） with the claim（要求）如何培养孩子的良好习惯. | |
2013英语一2.Instructions指示 说明 | Shall be included if necessary. Shall include asmbly, mounting（装备）, u, maintenance（维护）, cleaning and safety information as required in the language(s) applicable to the destination（目的地） country(s) with no errors or spelling mistakes.（地名写错） Shall be easy to follow and accurate. | |
3.product size/weight产品尺寸 重量 | Report actual. Shall comply with any claims (-0%, +3%) | |
4. Costco Plastic Bag Warning Statement | If plastic bags (of any thickness) with a perimeter(周长) of 14 inches or greater are ud in inner packaging, the following warning statement must be printed on at least one side of each bag in English, French and Spanish: | |
5. Lead In Surface Coating（被复盖） | Shall not exceed 600 ppm (0.06% by weight) total lead | |
6. Workmanship（工艺）/ Level | ∙ 镜架品牌No major defects（缺点）。 ∙ No components（成分） missing, malformed（畸形的） or fractured （破裂） ∙ No hardware missing ∙ Smoothly ground welds（接合）, not over-ground and free of pits（凹陷） and splatter（说话结巴） ∙ No burrs（喉音） ∙ No loo components and uncured fastening where rigidity（硬度） is required ∙ In the ca of wood (e.g. laminates（薄板) proper and uniform（一致的） adhesion（支撑） ∙ No scratches, dents（凹痕）, cracks（裂缝）, marred（损坏） or discolored surface ∙ In the ca of molded plastic, consistent and conci form and no defects evidencing（明显的） of overu（过度的） of mold。 ∙ Finished edges and ams（衔接口）岁月静好的诗句 ∙ Accurate and consistent（调和的） painting ∙ Components even in color, uniform clarity ∙ All ams and components in even alignment（结盟） ∙ Accurate and consistent painting ∙ Components even in color, uniform clarity（清楚） | |
7. Sharp Points and Edges | Shall have no sharp edges or sharp points on any component other than tho required for functional u. | |
8. Cross Cut Adhesion | Plating / finish must stay affixed – using a utility（万能）knife, cut a grid of 16 squares. U 3M masking tape (#202), apply to the grid. Remove to e if plating / finish remains intact.（完整无缺） | |
9. Flammability（可燃性） of Upholstery Materials | Must comply with California Bureau of Home Furnishings Bulletin 116/117 | |
10. Finger Entrapment | Shall meet the requirements intended to eliminate （消除） the possible hazard （危险） that may be caud by changing clearances or permanent（永久的） entrapment and pinching（收宿）of fixed openings.(<5mm or >13mm) | |
11. Resistance To Hot Water | Pour 25 mL. of boiling water and allow cooling. Dry surface, Shall be no graying（灰色） or spotting（斑点） | |
11 Effects Of Extreme Temperature | 24 Hours At -32° F And 140°F - No failure | |
12. Resistance（抵抗力） To Corrosion（侵蚀） (Metal Components) | 怎么清理手机病毒 Shall withstand（抵挡） 24 hours in 1% salt spray (fog) with no corrosion or visual change. | |
13. Effects Of Humidity（湿度） | No change after 24 hours. @ 95% RH & 100°F | |
14. Stain（污点） Resistance- (Do not test on picnic table/ racks) | Various food materials – should resist permanent staining.( After 2 hours, remove) 1. French’s Mustard t/2. Heinz Ketchup/3. Ragu Spaghetti sauce (original)/ 4. Folgers Instant Coffee/ 5. Welch’s Grape Juice/6. Kraft BBQ Sauce (original) / Red Wine | |
15 Resistance to Scratching / Marring Other Surfaces | No scratching or marring of surface (3 cycles of 6” back and forth.) Conduct with and without levelers. Note if levelers become bent or come off. Note any damage / defects (bent/broken levelers) | |
16. Caster Performance (If Supplied) | Max 5 lb pull to move under 200 lb load | |
17. Rear Stability背后的稳定性 | Min 35 Lbs. (30 Lbs. children) tipping force with a 173 Lbs. (100 Lbs. children) weight placed on the at (Strap). Force is applied in rearward direction against 1inch obstruction. Report result when at is in minimum, midpoint and maximum position | |
18. Front Stability (Excludes（把 …除外） Barstools & Ottomans) | The chair is obstructed（阻塞） by 1 inch bar in the front ba, tipping force is measured in the 45° to the test platform. The tipping force shall not be less than 40% of the total chair weight. | |
19. Tip Resistance (Stools Only) | Min 10 degree with 150 Lbs. (Children 100 Lbs.) distributed load, no tip-over | |
20. Stability (Stools Only) | Min 20 Lbs. pull force after 150 Lbs. (Children 100 Lbs.) distributed load on the at, no tip-over | |
21. Ba Durability（耐用力） | No structural（结构的） failure or permanent（永久的） deformation（变形） under 400 Lbs. (225 Lbs. children) static （静力的） load for 60 minutes. For multi atback positions, report result when at back is in minimum, midpoint, and maximum positions for 20 minutes each. | |
22. Front Seating Capability (Excludes Barstools & Ottomans) | No failure under 300 Lbs. (135 Lbs. children) loading at edge (6 In.) | |
23. Impact司马光砸缸的故事（碰撞） Durability (*If applicable – perform with and without cushion（垫子）) | No structural breakage, max ¼ inch deformation（变形） when 225 Lbs. (200 Lbs. folding chairs, 175 Lbs ottomans, 100 Lbs. children) test load free falls from 6 inch to the center of the at. For multi atback positions, report result when at back is in minimum, midpoint, and maximum positions. If chair has levelers, conduct test with levelers fully extended then rotated（旋转） inward （向内的） two revolutions. | |
24. Back Pull Durability后拉力 耐久力 | No failure at 100 Lbs. (60 Lbs. children) for 1 min. applied（应用） to 90° from back at 16 inch above the at. | |
25. Arm Strength Test (Vertical垂直的) | No permanent deformation at 300 Lbs. (90 Lbs. children) for 1 min. The vertical（吹垂直的） load is uniformly（均一的） applied through a 5 inch wide board across both arms – No failure / deformation | |
26．Arm Strength Test (Horizontal水平的) | No permanent deformation at 75 Lbs. (45 Lbs. children) for 1 min. The load is applied to the armrest horizontally at the most forward point of the armrest area. | |
27. Leg Strength腿力量 | No failure or permanent deformation at 75 Lbs. (40 Lbs. Child / folding chairs) applied to each leg at 1 inch from the end of the leg. Force is applied in four directions (Forward, rearward, side and side) for 1 minute. | |
36. Moisture Content (%) (Solid Wood Only)湿度 | 8% - 12% (Do not test on MDF) | |
37. Lightfastness （耐光性） | 匹诺曹木偶奇遇记Class 4.0 @ 20 hrs - Test up to 5 major/main components | |
本文发布于:2023-05-27 19:52:10，感谢您对本站的认可！
本文链接：https://www.wtabcd.cn/fanwen/fan/89/938649.html
版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系，我们将在24小时内删除。
| 留言与评论（共有 0 条评论） |
