homework_3_参考答案
Exerci 2
Question 2. Computer Purcha
Let us assume that you are purchasing a new computer for a specific usage. You need to choo a computer from various available configurations.
Listed below are four different usage cas of a computer (a-d). For each usage ca, identify components of the computer configuration that are most important to consider. Explain your answers.
Components to be considered include (but are not limited to): ?Monitor size/resolution
Graphics card/video card
Storage devices (for example, DVD-ROM)
Memory (RAM, cache, and hard disk)
Disk controller interfaces (ATA, EIDE)
For example, if a computer were to be ud for viewing movies, a DVD-ROM drive is needed since movies are available as CDs and now increasingly as DVDs. A l arge monitor (about 19”) that supports high resolutions and a video card will also be necessary to enjoy the movie.
再回首吉他谱a. Simultaneously running a number of programs
Large capacity memory (at least 1G ) is needed to stores data and instructions needed to execute programs when a number of programs run. In order to resolve this question, we should lect the appropriate processor.T he Intel? Core? Duo processor with its two execution cores is optimized for
multi-threaded applications and multitasking. You can simultaneously run multiple demanding applications, such as 3-D games or rious scientific rearch programs, while downloading files or running
virus-scanning curity programs in the background.
b. Running a speed-critical application
Considering system running speed: AMD processor is typically with less cost, sometimes even faster than Intel's products.
So the AMD Opteron? processor is needed. The AMD Opteron processors with Direct Connect Architecture and HyperTransport? Technology deliver leading-edge 32-bit performance today and enable you to transition to 64-bit computing at your own pace, without sacrificing your x86 technology investment.
A mother board with high speed front side bus is needed
c. Storing and retrieving huge volumes of data
A large storage hard disk is needed (at least 800G) to store huge volumes of data, at the same time, we should foree the demand of it.
A DVD-RW is needed when you want to store your huge volumes of data in DVD-ROM.
A motherboard with EIDE interface can accommodate a total of four devices, maybe you will get up to
2 hard disk or more.
d. Purchasing a basic configuration, to be upgraded later as needed
For upgrading your system, you must t your system has ability of upgrade and extended. So one good motherboard is needed.
The Intel? Desktop Board D975XBX is designed to deliver the best experience for advance d gamers and power-urs. Bad on the Intel? 975X Express Chipt and Intel? Pentium? processor Extreme Edition, this board has the best performance and the ability of upgraded. The Intel? Desktop Board
D975XBX supports Intel? Viiv? technology, and comes with the software required to help meet Intel?
义加偏旁组词
Viiv? technology brand verification requirements.
Question 3. Laptop Computer Selection
You are a new graduate student enrolling in a Masters in Information Technology program. The department requires you to have a computer with the following requirements:
512 MB of RAM
20 GB hard drive
CD-ROM drive
Wireless connection
Ethernet network card
Windows XP Professional version
Your school has wireless connection, and Ethernet jacks. However, some class are three hours long, and your AC adapter may not be long enough to reach an outlet. You also would be carrying this computer around from class to class.
The most you can spend is US$1200.
Indicate the range of values you desire for each of the following criteria: a. Weight
b. Screen size
c. Number of USB ports
d. Number of Firewire ports
e. Need CD-RW?
f. Need DVD-ROM?
g. Need DVD-RW?
h. Manufacturer preferences?
i. Search the Internet for two suitable computers meeting the above requirements and your budget constraint. Submit screenshots of the Web pages detailing the computer configuration and price.
j. Record your arch results in a MS Excel spreadsheet. Fill column A with the following category labels:
红烧卤鸡爪1. Manufacturer
2. Processor
3. Memory (maximum upgrade capacity)
4. Screen size
5. Weight
6. Graphics card
7. USB
8. Firewire
9. CD-ROM
10. DVD-ROM
11. Communications (e.g. wireless, Ethernet)
12. Battery life
14. Available Rebate
Save and submit your Excel file.
k. Make your final purcha decision and justify your decision.
Unit 1 and Unit 2 Review Materials
2. Binary
a.Define bit.
b.Define byte.
c.Fill in the following chart, listing the prefixes ud for
the amount of bytes shown:
d.Fill in the following chart, converting binary numbers to
decimal and decimal numbers to binary:
(Note:The numbers that appear in the table below will differ
on an exam from the numbers that appear on the exam's review sheet.)
e.Although in sales literature 1000 bytes and 1024 bytes are
both commonly referred to as a kilobyte, in computing the only correct number of bytes in a kilobyte is1024. Explain why 1024 is correct. Many quantities in binary computers are restricted to powers of 2, and 210 is 1024, which is so clo to 1000 that kilo is ud informally.
f.How can the difference in measuring bytes prented in part
e impact a consumer when they are purchasing a hard disk drive?
A hard disk drive is typically measured traditionally, in powers of 10. Therefore
a gigabyte in a hard disk is 109, not the larger 230. Not knowing this, a
consumer might be surprid that the disk capacity was less than he thought was advertid.
3. Component Identification
Choo among the following components to label the image: Motherboard
Power supply
BIOS ROM Chip
Cooling fan
Expansion slot
RAM chip
Expansion card
Disk drives
Chipt
Ethernet cable
PCI bus
a)Label A is _ Power supply ____.博思得c168
b)Label B is __ Cooling fan ___.
c)Label C is _ Expansion slot____.
d)Label D is _ Expansion card____.
e)Label E is _ Motherboard____.
f)Label F is __ Disk drives ___.
g)Label G is __ IDE cable ___.
Describe the functionality of each of the following
components (in 2 ntences or less):
h)Microprocessor: Process instructions stored in main memory
手机怎么解压zip文件i)RAM: Stores data and instructions temporarily.
j)Bus: Pathway through which data is transferred from one part of a computer to another
k)Expansion card: Enables a computer to control peripheral devices such as the monitor and the microphone l)Disk drive: Stores data permanently (even after the computer is turned off).
m)IDE cable: Transfers data from storage devices to the motherboard
8. I/O
a.Define I/O device. An I/O device, or input/output device, provides the ur
with ways of giving the processor data to process and ways of receiving
procesd data
过江龙索桥b.Consider that a computer requires I/O devices to be able to
interact with its environment. Explain why it is necessary
for computers to have the devices. The basic definition of a
computer includes input and output. The devices are necessary for the
computer to exist. Differing I/O devices allow alternate input and output, but
minimally the computer needs at least one of each
c.Give four examples of I/O devices. [Choo from] Keyboard; monitor;
tape backup drive; scanner; microphone; speakers; CD writer; …
d.For each I/O device in your answer to part c, explain the
device's function from the perspective of a ur.
i.A keyboard provides data to a computer, to direct its behavior or supply
information for processing (name, address telephone number).
ii.A monitor displays to the ur the status and results of work performed by the computer.
iii.A tape backup drive receives a copy of information stored on hard disk drives, and can later supply information to be stored on that hard disk drive
in ca the disk drive crashes or a file is accidentally deleted.
iv.A scanner translates a picture or document to a bitmap image that can be procesd by a computer, or included in other work like a web page or
Word document
v.A microphone translates speech or music into digital from that can be procesd by the computer.
12. Picture Quality
a.Explain resolution, with respect to a monitor.
Number of pixels on the screen
b.List two typical monitor resolutions.
1024x768, as an example.
640x480, as an example.
c.Explain color depth, with respect to a monitor.
Maximum number of colors on the screen at one time.
d.List two typical monitor color depths.
16 bit, as an example.
24 bit, as an example.
e.Consider that the higher the resolution and the higher the
color depth, the more system resources are required to
display output on the monitor.
/doc/2717108315.html
汉书地理志
e the resolutions from part b and the color depths
from part d to calculate the amount of RAM required to
display the image. 1024x768x24/8=2.25MB, as an example.
ii.Explain the calculation you made in part e.i in a way
that confirms the statement made at the beginning of火龙果慕斯蛋糕
part e—that "the higher the resolution and the higher
the color depth, the more system resources are required
to display output on the monitor." The calculations in part
E.i demonstrate that by increasing either the resolution or the color depth
that the amount of memory required will increa, demonstrating that
more system resources (RAM) are required.
13. Port Identification
Consider the following devices:
Mou
Printer
