力值、硬度计量名词术语及定义
一力值
1 力基（标/校）准机()
1.1 力( Force) ( )
1.2 万有引力(Universal gravitation) ( )
1.3 重力(gravity) ( )
1.4 弹性力(elastica) ( )
1.5 重力加速度(gravity acceleration) ( )
1.6 牛顿(Newton) ( )
1.7 力标准机(force standard machine) ( )
1.8 力基准机(primary force standard machine) ( )
1.9 力校准机(force calibration machine) ( )
1.10 静重式力标准机(deadweight force standard machine -DWM) ( )
1.11 杠杆式力标准机(lever-amplification force standard machine -LM) ( )
1.12 液压式力标准机(hydraulic-amplification force standard machine-HM) ( )
1.13 叠加式力标准机(build-up force standard machine-BM) ( )
1.14 力比较机(force comparator-FC) ( )
1.15 扭矩基准机(primary standard torquer) ( )
1.16 扭矩校准机(torque calibration machine) ( )
1.17 静重式扭矩标准机(deadweight torque standard machine -DTM) ( )
1.18 杠杆式扭矩标准机(lever-amplification torque standard machine -LTM) ( )
1.19 串接式扭矩标准机(rial-connection torquer -SCT) ( )
1.20 测力式扭矩标准机(torquer by mean of measuring force-TMF) ( )
1.21 扭矩校准杠杆（torque-calibration lever） ()
1.22 摆锤式冲击标准机(pendulum impact standard machine) ( )
1.23 摆锤式冲击基准机(pendulum impact primary standard machine) ( )
学海无涯的意思
1.24 力值不确定度(force uncertainty) ( )
2
1.25 力值重复性(force repeatability) ( )
1.26 力值示偏差（force indication deviation） ( )
1.27 力值范围(force range) ( )
1.28 力级(force step) ( )
1.29 灵敏阈(nsitivity threshold) ( )
1.30 寄生分量(parasitic components) ( )
1.31 旋转效应(rotation effect) ( )
1.32 重叠效应(overlapping effect) ( )
1.33 力值直线度(linearity of force) ( )
1.34 附加滞后(additional hysteresis) ( )
1.35 递增负荷(increasing force) ( )
1.36 递减负荷(decreasing force) ( )
1.37 逆负荷现象(counter-force phenomenon) ( )
1.38 加荷时间(period for loading) ( )
1.39 加荷速率(loading rate) ( )
1.40 卸荷时间(period for unloading) ( )
1.41 卸荷速率(unloading rate) ( )
1.42 砝码(weight) ( )
1.43 机架(fixed framework) ( )
1.44 负荷机架(loading frame) ( )
1.45 压力试台(Platform for loading) ( )
1.46 提升架(lifting frame) ( )
1.47 加荷横梁(beam for loading) ( )
1.48 压缩空间(room for compression device) ( )
1.49 拉伸空间(room for tension device) ( )
1.50 反向器(reverr) ( )
1.51 杠杆(lever) ( )
1.52 支点刀(supporting-knife) ( )
1.53 重点刀(weight-knife) ( )
1.54 力点刀(force-knife) ( )
1.54 杠杆有效长度(effective length of lever) ( )
空腹能不能吃香蕉1.55 杠杆比(Lever amplification-ratio) ( )
1.56 直接加荷部分(directly loading unit) ( )
1.57 负荷放大部分(main unit) ( )
1.58 比例活塞(proportional piston) ( )
1.59 比例油缸(proportional cylinder) ( )
1.60 加荷活塞(loading piston) ( )
1.61 加荷油缸(loading cylinder) ( )
1.62 放大比(Amplification ratio) ( )
1.63 活塞有效面积(effective cross-area of piston) ( )
1.64 油缸转速(turn-speed of cylinder) ( )
1.65 油缸旋转线速度(speed of cylinder) ( )
1.66 导向活塞(guide-piston ( )
1.67 最大压力(maximum pressure) ( )
钦州地区1.68 负荷转换活塞(piston for load relieving & pressure transmitting) ( )
1.69 负荷转换油缸(cylinder for load relieving & pressure transmitting) ( )
1.70 同轴度(coaxality) ( )
1.71 几何同轴度(geometric coaxality) ( )
1.72 受力同轴度(coaxality with load) ( )
要红包表情包
2 测力仪( )
2.1 测力仪(dynamometer) ( )
2.2 标准测力仪(standard dynamometer) ( )
2.3 弹性体(elastic element) ( )
2.4 变形测量装置(indicator of deflection) ( )
2.5 变形(deformation) ( )
2.6 额定变形(deflection under rated load) ( )
2.7 读数值(reading) ( )
2.8 变形示值(indication of deflection) ( )
2.9 测力环(proving ring) ( )
2.10 压向测力仪(compression dynamometer) ( )
贝鲁特屠杀2.11 拉向测力仪(tension dynamometer) ( )
2.12 双向测力仪(tension & compression dynamometer) ( )
2.13 负荷(load) ( )
2.14 静负荷(static load) ( )
2.15 动负荷(dynamic load) ( )
2.16 循环负荷(cycle load) ( )
2.17 随机负荷(random load) ( )
2.18 冲击负荷(impact load) ( )
2.19 额定负荷(rated load) ( )
2.20 最小负荷(minimum load) ( )
2.21 负荷范围(load range) ( )
2.22 预负荷(preload) ( )
2.23 检定(verification) ( )
2.24 定度(calibration) ( )
2.25 进程定度(increasing calibration) ( )
2.26 回程定度(decreasing calibration) ( )
2.27 分度值(division) ( )
2.28 重复性(repeatability) ( )
2.29 滞后(hysteresis) ( )
2.30 稳定度(Long-term stability) ( )
2.31 温度修正系数(coefficient for temperature correction) ( )
2.32 校准方程(calibration equation) ( )
2.33 管形测力仪(cylindric dynamometer) ( )
主播顺口溜
2.34 扭矩仪(torque-meter) ( )
哲学观2.35 标准扭矩仪(standard torque-meter) ( )
2.36 扭矩扳子(Torque wrench) ( )
2.37 扭矩扳子检定/校准仪(Calibrator of torque wrench) ( )
2.38 扭矩改锥(Torque driver) ( )
2.39 扭矩改锥检定/校准仪(Calibrator of torque driver) ( )
干么2.40 测功机（Machine measuring power） ()
2.41 摆锤式冲击机检定标准装置(standard equipment for calibration of pendulum ( )
