芜湖特色美食
疯狂丑小鸭工艺安装程序文件英文版
脸痣相图解大全女Installation Procedure of Magnetic Core Process
2021高考作文Magnetic core process is a kind of process ud to produce different types and sizes of ferrite cores by adding powder to the mold and then sintering them at high temperature. Generally, the installation procedure of magnetic core process includes veral steps.
Firstly, needing to check the general conditions of the working environment, in order to make sure the safety of staff, the working environment shall be in the condition of no leakage and no gas; Secondly, the workers should check the installation status of the equipment and the wiring of the power source, such as switching on the power source, whether it is stable or not, and all the signals of equipment, in order to clarify whether the machine work normally.
Thirdly, the glue, the mold and the supporting meshes should be prepared. The glue can be applied to the side of the supporting mesh and then u a brush to spread it evenly. All the
驻足痴望staff should be careful when handling glue, in terms of not dropping it on the mold, residues or the work area; After finding out the power source is stable, we should u the heat gun to heated the mold, by controlling the switch to realize the temperature adjustment.
中国海洋食品网Then, adding the powder into the mold, when the powder is weighed correctly and is poured into the cavity, the powder needs to be leveled, and the worker need make sure that there are no over-lvlling places on the surface of the powder; In addition, once the mold is ready, the upper and lower punch needs to be placed evenly on the mold, u a hydraulic press together with a pre-t pressure to push the punch into the mold, and keep it stable for a certain period of time.
After that, open the punch and take the core out of the cavity. The core should be placed on the equipment for inspection and cutting, cut off the excess portion at the end of the core and shape the required radius of curvature. At last, we u a clean cloth to wipe down the core and remove any powder still left on the surface.雅威
雪梨英文
In conclusion, the installation procedure of magnetic core process is complicated but needs to be done in procedures, so that we can reduce the failure rate and make sure the product is qualified.
