Safety Data Sheet according to GB/T 16483-2008
Page 1 of 10 . LOCTITE ABLESTIK 84-3J known as Ablebond 84-3J (18g), MSDS-No. : 377114
V001.9
Revision: 01.07.2017
printing date: 27.07.2017
1. Identification of the substance/preparation and of the company/undertaking
梦的故事Product name: LOCTITE ABLESTIK 84-3J known as Ablebond 84-3J (18g),
Epoxy adhesive
Intended u:
Company name:
Henkel (China) Investment Co. Ltd.
No.928 Zhangheng Rd.
201203
China
Pudong, Shanghai, P.R. China
Phone: Fax-no.: +86-21-2891 8000 +86-21-2891 5137
Revision date: 16.10.2015
Emergency information: Emergency telephone: +86 532 8388 9090 (24h).
2. Hazards identification
Classification of the substance or mixture according to GB 13690-2009 (General rule for classification and hazard communication of chemicals):
Hazard Class Hazard Category
Category 2
Category 1 Route of Exposure Skin contact
Eye contact
Skin corrosion/irritation
Serious eye damage/eye irritation
Skin nsitizer Category 1 Skin contact
Chronic hazards to the aquatic
environment
Category 3
Label elements according to GB 15258-2009 (General rules for preparation of precautionary label for chemicals): Hazard pictogram:
Signal word: Danger
Hazard statement: Prevention: H315 Caus skin irritation.
H317 May cau an allergic skin reaction.
H318 Caus rious eye damage.
H412 Harmful to aquatic life with long lasting effects.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P264 Wash hands thoroughly after handling.
P272 Contaminated work clothing should not be allowed out of the workplace. P273 Avoid relea to the environment.
P280 Wear eye protection/face protection.
P280 Wear protective gloves.
Respon: P302+P352 IF ON SKIN: Wash with plenty of water.
P305+P351+P338 IF IN EYES: Rin cautiously with water for veral minutes. Remove
contact lens, if prent and easy to do. Continue rinsing.
P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
P362+P364 Take off contaminated clothing and wash it before reu.
Storage: Disposal:
P403+P233 Store in a well-ventilated place. Keep container tightly clod.
扒皮鱼怎么做好吃P501 Dispo of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
3. Composition / information on ingredients
Declaration of the ingredients according to GB 13690-2009:
Hazard component CAS-No. Quartz (SiO2)
Content
死亡证明模板30- < 50 %
GHS Classification
14808-60-7
Reaction product: bisphenol-F-(epichlorhydrin); epoxy resin (number average molecular weight <= 700) 9003-36-5 20- < 30 % Skin corrosion/irritation 2; Dermal
H315
优秀作文200字Skin nsitizer 1; Dermal
H317
Chronic hazards to the aquatic environment 2
H411
1,4-Bis(2,3-epoxypropoxy)butane 2425-79-8 10- < 20 % Acute toxicity 4; Oral
H302
Acute toxicity 4; Inhalation
H332
Acute toxicity 4; Dermal
H312
Skin corrosion/irritation 2
H315
Serious eye damage/eye irritation 1
H318
Skin nsitizer 1
H317
Chronic hazards to the aquatic environment 3
H412
Dapsone 1- < 10 % Acute toxicity 4; Oral 80-08-0 H302
Reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight <= 700) 25068-38-6 0.1- < 1 % Skin corrosion/irritation 2
H315
Serious eye damage/eye irritation 2A
H319
Skin nsitizer 1
H317
Chronic hazards to the aquatic environment 2
H411
Only hazardous ingredients for which a classification according to GB 13690-2009 is already available are displayed in this table. For full text of the Hazard statements e ction 16 “Other information”.
4. First aid measures
Skin contact: Immediately flush skin with plenty of water (using soap, if available).
Remove contaminated clothing and footwear.
If symptoms develop and persist, get medical attention.
Wash clothing before reu.
Eye contact: Inhalation: Rin immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
Move to fresh air.
If not breathing, give artificial respiration.
If breathing is difficult, give oxygen.
Get medical attention.
Ingestion: Do not induce vomiting.
Never give anything by mouth to an unconscious person.
Get medical attention.
5. Fire fighting measures
Hazardous combustion products: Oxides of carbon, oxides of nitrogen, irritating organic vapors.
Extinguishing media: Fire-fighting method: Water spray (fog), foam, dry chemical or carbon dioxide. Avoid open flames and sources of ignition.
Notice and measures for firing
fighting:
Wear lf-contained breathing apparatus and full protective clothing, such as turn-out gear.
演讲稿怎么写
6. Accidental relea measures
Emergency measures: Clean-up methods: Persons not wearing appropriate protective equipment should be excluded from area of spill until clean-up has been completed.
Wear protective equipment.
Do not empty into drains / surface water / ground water.
Avoid contact with skin and eyes.
For small spills wipe up with paper towel and place in container for disposal.
For large spills absorb onto inert absorbent material and place in aled container for disposal.
王巍Precautious measures to prevent
condary hazards:
Do not unite with other spilled material.
7. Handling and storage
Notice for handling: Notice for storage:
Ensure that workrooms are adequately ventilated.
Avoid open flames and sources of ignition.
Avoid skin and eye contact.
Keep container tightly aled.
Store in original container at -40°C
8. Exposure controls / personal protection
Hazardous components GBZ 2.1-2007 ACGIH NIOSH OSHA Quartz (SiO2) 0.7 mg/m3TWA
1 mg/m3TWA
0.025 mg/m3 TWA none
0.3 mg/m3TWA
0.7 mg/m3TWA
0.5 mg/m3TWA
0.2 mg/m3TWA
Engineering controls: Respiratory protection: Local exhaust ventilation is recommended when general ventilation is not sufficient to control airborne contamination below occupational exposure limits.
Filter type: A
An approved mask or respirator fitted with an organic vapour cartridge should be worn if the product is ud in a poorly ventilated area
Eye protection: Body protection: Hand protection: Wear safety glass with side shields.
Wear suitable protective clothing.
Chemical-resistant protective gloves (EN 374).
Suitable materials for short-term contact or splashes (recommended: at least protection index 2, corresponding to > 30 minutes permeation time as per EN 374):
nitrile rubber (NBR; >= 0.4 mm thickness)
Suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes permeation time as per EN 374):
nitrile rubber (NBR; >= 0.4 mm thickness)
This information is bad on literature references and on information provided by glove manufacturers, or is derived by analogy with similar substances. Plea note that in practice the working life of chemical-resistant protective gloves may be considerably shorter than the permeation time determined in accordance with EN 374 as a result of the many influencing factors (e.g. temperature). If signs of wear and tear are noticed then the gloves should be replaced.
Other protection: The lection of PPE shall at least compliant with "Law of the People's Republic of China
on Prevention and Control of Occupational Dias" and "Code of practice for lection
of personal protective equipments" (GB/T 11651-2008).
Pictograms for recommended PPE:
9. Physical and chemical properties
Physical state: liquid Appearance: Blue
Paste
pH:
Vapor density: Not available.
Not available.
Melting point:
肝火旺盛怎么调理
Vapor pressure:
Not available.
Not applicable
Not available.
Not available.
Flash point: Solubility in water > 93 °C (> 199.4 °F)
Not available.
Ignition temperature:
Viscosity:
10. Stability and reactivity
Stability: Stable under normal conditions of storage and u. Conditions to avoid: High temperatures.
Heat, flames, sparks and other sources of ignition.
Store away from incompatible materials. Incompatible products: Strong oxidizing agents.
Strong acids and strong bas.
Decomposition products: Hazardous polymerization: Oxides of carbon.
Irritating organic vapours.
None under normal processing. Polymerization may occur at elevated temperature or in the prence of incompatible materials.
11. Toxicological information
General toxicological information:
No experimental toxicological data on the preparation as such is available. Oral toxicity:
Acute toxicity estimate (ATE) : > 5,000 mg/kg
Method: Calculation method
Inhalative toxicity:
Acute toxicity estimate (ATE) : > 40 mg/l
Exposure time: 4 h太行大峡谷
Test atmosphere: Vapor.
Method: Calculation method
Dermal toxicity:
Acute toxicity estimate (ATE) : > 5,000 mg/kg
Method: Calculation method
