SAFETY DATA SHEET
性格恶劣1.1 Product identifier
Product name: Eastman Tritan(TM) Copolyester TX1001
Product No.: TX1001, P32031FZ, E3203101, 50122899, 50122900, 50122911, 50123261, 50123262
Synonyms, Trade Names: not applicable
1.2 Relevant identified us of the substance or mixture and us advid against
Identified us:Plastics
Us advid against:None known.
1.3 Details of the supplier of the safety data sheet
Manufacturer / Supplier
Eastman Chemical Company
200 South Wilcox Drive
Kingsport, TN 37660-5280 US
+14232292000
Visit our website at or email
1.4 Emergency telephone number:
For emergency health, safety, and environmental information, call 1-423-229-4511 or 1-423-229-2000.
For emergency transportation information, in the United States: call CHEMTREC at 800-424-9300 or call 423-229-2000.
CAUTION!
MOLTEN MATERIAL WILL PRODUCE THERMAL BURNS
3.1 / 3.2 Substances / Mixtures
捏小动物
General information:
# This substance has workplace exposure limit(s).
PBT: persistent, bioaccumulative and toxic substance.
vPvB: very persistent and very bioaccumulative substance.
©COPYRIGHT 2011 BY EASTMAN CHEMICAL COMPANY 1/9
©COPYRIGHT 2011 BY EASTMAN CHEMICAL COMPANY
2/9
4.1 Description of first aid measures
Inhalation: Move to fresh air. Treat symptomatically. Get medical attention if symptoms
persist.
Eye contact:
Any material that contacts the eye should be washed out immediately with water. If easy to do, remove contact lens. Get medical attention if
symptoms persist. If molten material contacts the eye, immediately flush with plenty of water for at least 15 minutes. Get medical attention immediately.
Skin contact:
Wash with soap and water. Get medical attention if symptoms occur. If burned by contact with hot m
aterial, cool molten material adhering to skin as quickly as possible with water, and e a physician for removal of adhering material and treatment of burn. Get medical attention.
Ingestion: Seek medical advice.
4.2 Most important symptoms
and effects, both acute and delayed: Burns should be treated as thermal burns. The material will come off as healing occurs; therefore, immediate removal from the skin is not necessary.
4.3 Indication of any immediate medical attention and special treatment needed
Hazards:
Contact with molten substance/product may cau vere burns to skin and
eyes.
Treatment: Treat symptomatically.
General fire hazards: Material can accumulate static charges which may cau an electrical
spark (ignition source). U proper bonding and/or grounding procedures.
5.1 Extinguishing media
Suitable extinguishing media: Water spray. Dry chemical. Carbon Dioxide.
Unsuitable extinguishing media: None known.
5.2 Special hazards arising
from the substance or mixture: Powdered material may form explosive dust-air mixtures.
5.3 Advice for firefighters
Special Fire Fighting Procedures: Minimize dust generation and accumulation.
Special protective
equipment for fire-fighters: Self-contained breathing apparatus and full protective clothing must be worn in ca of fire.
©COPYRIGHT 2011 BY EASTMAN CHEMICAL COMPANY
3/9
6.1 Personal precautions,
protective equipment and emergency procedures: Wear appropriate personal protective equipment.
6.2 Environmental precautions: Not regarded as dangerous for the environment.
6.3 Methods and material for
containment and cleaning up: Sweep up and place in a clearly labeled container for chemical waste.
Notification Procedures: In the event of a spill or accidental relea, notify relevant authorities in accordance with all applicable regulations.
7.1 Precautions for safe
handling: Avoid contact with molten material.
情实
7.2 Conditions for safe storage,
including any incompatibilities: Keep container clod.
7.3 Specific end u(s): No data available.
8.1 Control parameters
Occupational exposure limits
If exposure limits have not been established, maintain airborne levels to an acceptable level.
8.2 Exposure controls
Appropriate engineering controls: Good general ventilation (typically 10 air changer per hour) should be ud. Ventilation rates should be matched to conditions. If applicable, u
process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits.
雷雨发庄稼Individual protection measures, such as personal protective equipment
General information: Eye bath. Washing facilities.
Eye/face protection: It is a good industrial hygiene practice to minimize eye contact. Wear a face shield when working with molten material.
Skin protection
Hand protection:It is a good industrial hygiene practice to minimize skin contact. When
material is heated, wear gloves to protect against thermal burns.
Other:No data available.
Respiratory Protection:If engineering controls do not maintain airborne concentrations below
recommended exposure limits (where applicable) or to an acceptable level
(in countries where exposure limits have not been established), an
approved respirator must be worn. In the United States of America, if
respirators are ud, a program should be instituted to assure compliance
with OSHA Standard 63 FR 1152, January 8, 1998. Respirator type: Air-
purifying respirator with an appropriate, government approved (where
applicable), air-purifying filter, cartridge or canister. Contact health and
safety professional or manufacturer for specific information.
Hygiene measures:Obrve good industrial hygiene practices.
Environmental Controls: No data available.
9.1 Information on basic physical and chemical properties
Appearance
Physical State:Solid
Form: Pellet
Color: natural color
Odor: Slight
Odor Threshold: No data available.个人主要事迹范文
pH: No data available.
No data available.
Boiling Point:No data available.
Flash Point: Not applicable
Evaporation Rate: No data available.
Flammability (solid, gas): No data available.
Flammability Limit - Upper (%)–:No data available.
Flammability Limit - Lower (%)–:No data available.
艾灸
Vapor pressure:No data available.
Vapor density (air=1):No data available.
欧美电影排行Relative density:Estimated > 1
Solubility(ies)
Solubility in Water:Negligible
Solubility (other):No data available.
Partition coefficient (n-octanol/water):No data available.
Autoignition Temperature:No data available.
Decomposition Temperature:No data available.
Viscosity:No data available.
©COPYRIGHT 2011 BY EASTMAN CHEMICAL COMPANY 4/9
Explosive properties: No data available.
Oxidizing properties: No data available.
10.1 Reactivity: None known.
10.2 Chemical stability: Stable
10.3 Possibility of hazardous
None known.
起点终点reactions:
10.4 Conditions to avoid: None at ambient temperatures.
10.5 Incompatible materials: Strong oxidizing agents.
10.6 Hazardous decomposition
Carbon Dioxide. Carbon Monoxide.
products:
Information on likely routes of exposure
Inhalation: None known.
Ingestion: None known.
Skin contact: Molten material will produce thermal burns.
Eye contact: Molten material will produce thermal burns.
11.1 Information on toxicological effects
Acute Toxicity
Oral
Product: No data available.
Dermal
Product: No data available.
Inhalation
Product: No data available.
Repeated do toxicity
Product: No data available.
Skin corrosion/irritation:
Product: No data available.
Serious eye damage/eye
irritation:
Product: No data available.
©COPYRIGHT 2011 BY EASTMAN CHEMICAL COMPANY 5/9
