吃食
美国大峡谷冶金能源
ENERGY FOR METALLURGICAL INDUSTRY Vol.39No.5 Sept2020
22
取向硅钢隧道高温退火炉节能与加热效率优化
潘书婷1戴方钦1刘鹏程2刘宝志彳郭悦I潘卢伟1（1-武汉科技大学钢铁冶金及资源利用省部共建教育部重点实验室,
2.包头市威丰稀土电磁材料股份有限公司热处理厂）
满天星图片
教室标语摘要针对原隧道高温退火炉存在的问题进行设计改造，改造主要包括：选择合适型号的
烧嘴，以保证烧嘴在额定功率下工作；开发大速差多级配风超低N0
*烧嘴，提高燃烧效率，使炉子的N0’排放不超过80mg/m3；调整烧嘴的安装位置，提高炉内换热效率和炉温均匀性;
竞聘报告怎么写重新设计台车砌体，轻量化台车，使台车蓄热量减少35%；炉膛内表面喷涂高红外反射率涂
料，以提高炉膛辐射换热。改造后退火炉与之前相比，提高了钢卷的退火质量以及炉子的热
效率，节约了燃料消耗量。
切音字>凉拌青豆
关键词隧道高温退火炉高速烧嘴台车轻量化红外涂层
文献标识码：A 文章编号：1001-1617（2020）05-0022-04
Energy_saving and heating efficiency optimization of oriented silicon
steel tunnel high temperature annealing furnace
Pan Shuting1Dai Fangqin1Liu Pengcheng2Liu Baozhi2Guo Yue1Pan Luwei1
(1.Key Lab for Ferrous Metallurgy and Resources Utilization of Ministry of Education,
2.Baotou Weifeng Rare Earth Electromagnetic Materials Co.,Ltd.
Heat Treatment Plant Baotou)
Abstract In view of the problems existing in the former tunnel high一temperature annealing furnace,
情成语design improvements are made.The improvements mainly includes:choosing a suitable type of burners
to ensure the burners work at the rated power；developing multi-stage air distribution ultra-low NO X
burner with large speed difference to improve combustion efficiency and make the N0x emission of the
furnace not exceed80mg/m3；adjusting the installation position of the burners to improve the heat ex
change efficiency and furnace temperature uniformity in the furnace；redesigning the trolley masonry,
which reduces the weight of the trolley and reduces the heat storage of the trolley by35%;spraying
high-temperature infrared coating material on the inner surface of the furnace to improve the radiation
heat transfer of the furnace.Compared with the former annealing furnace,the annealing quality of the
steel coil and the thermal efficiency of the furnace are improved,and the fuel consumption is saved.
Keywords tunnel high temperature annealing furnace high-speed burner lightweight trolley
infrared coating
硅钢是一种用于制造发电机、电动机、互感器及其他电器仪表的重要软磁材料，也是电力、军事工业中不可缺少的合金材料U7，高温退火
收稿日期：2020-04-07
潘书婷（1996-），硕士；430081湖北省武汉市。
通讯作著：戴方钦，教授;E-mail:daifangqin@ 是取向硅钢生产的关键工序。环形退火炉和单体高温罩式炉是进行高温退火的常用炉型[5-8]o其中，环形炉机械化程度高，炉温制度易于控制且灵活，可以实现连续生产，但机械设备复杂，主要依赖进口，一次投资大，对厂房布置有一定的
