CHIMEI INNO L U X DISPLAY CORPORATION唐诗咏柳
LCD MODULE
SPECIFICATION
Customer:
Model Name: EJ080NA-04B
Date: 2010/12/17
Version: 02
■Preliminary Specification
□Final Specification
For Customer’s Acceptance
Approved by Comment
Approved by Reviewed by Prepared by
Hans Chen
2010/12/17
James Yu
Charlie Chou申请书内容
2010/12/17
David Lee
2010/12/17
CHIMEI INNOLUX
copyright 2004
All rights rerved,
Copying forbidden. Record of Revision
Version Revi
Date
Page Content
Pre-Spec.01 2010/09/10 Initial Relea.
02 2010/12/17 1 Add power consumption
6 Modify the values of power voltage and Vcom Add note 3 and note 4
7 Add the values of current for driver 11 Modify timing symbol
15 Modify note 6
19 Modify mechanical drawing
21 Add package drawing
钉组词语
CHIMEI INNO L U X
Contents
1. General Specifications (1)
2. Pin Assignment (2)
2.1. TFT LCD Panel Driving Section (2)既的组词
3. Operation Specifications (5)
3.1. Absolute Maximum Rating (5)
3.1.1. Typical Operation Conditions (6)
3.1.2. Current Consumption (7)
3.1.3. Backlight Driving Conditions (7)
3.2. Power Sequence (8)
3.3. Timing Characteristics (9)
3.3.1. AC Electrical Characteristics (9)
3.3.2. Input Clock and Data Timing Diagram (9)
3.3.3. DC Electrical Characteristics (10)
3.3.4. Timing (11)
3.3.5. Data Input Format (12)
4. Optical Specifications (13)
5. Reliability Test Items (17)
6. General Precautions (18)
6.1. Safety (18)
6.2. Handling (18)
6.3. Static Electricity (18)
6.4. Storage (18)
6.5. Cleaning (18)
7. Mechanical Drawing (19)
8. Package Drawing (20)
8.1 Package Material Table (20)
8.2 Package Quantity (20)
8.3 Package Drawing (21)
1. General Specifications
No. Item Specification Remark
1 LCD size 8.0 inch(Diagonal)
2 Driver element a-Si TFT active matrix
3 Resolution 102
4 × 3(RGB) × 768
4 Display mode Normally White, Transmissive
5 Dot pitch 0.05275(W) × 0.15825(H) mm
6 Active area 162.048(W) × 121.536(H) mm
记叙文作文素材7 Module size 183.0(W) × 141.0(H) × 3.4(D) mm Note 1
8 Surface treatment Hard coating
9 Color arrangement RGB-stripe
10 View Direction(Gray Inversion) 4:30 o’clock
11 Interface Digital
12 Backlight power consumption 1.674W (Typ.)ps如何加水印
13 Panel power consumption 0.411W (Typ.)
14 Weight 183g
Note 1: Refer to Mechanical Drawing.
2. Pin Assignment
2.1. TFT LCD Panel Driving Section
FPC Connector is ud for the module electronics interface. The recommended model is FH12A-40S-0.5SH manufactured by Hiro.
Pin No. Symbol I/O Function Remark
1 VCOM P Common Voltage
2 VDD P Power Voltage for digital circuit
3 VDD P Power Voltage for digital circuit
送礼怎么说
4 NC --- No connection
5 Ret I Global ret pin
6 STBYB I Standby mode, Normally pulled high STBYB = “1”, normal operation STBYB = “0”, timing controller, source driver will turn off, all output are High-Z
7 GND P Ground
8 RXIN0- I - LVDS differential data input
9 RXIN0+ I + LVDS differential data input
10 GND P Ground
11 RXIN1- I - LVDS differential data input
12 RXIN1+ I + LVDS differential data input
13 GND P Ground
14 RXIN2- I - LVDS differential data input
15 RXIN2+ I + LVDS differential data input
16 GND P Ground描写菊花的古诗
17 RXCLKIN- I - LVDS differential clock input
18 RXCLKIN+ I + LVDS differential clock input
19 GND P Ground
20 RXIN3- I - LVDS differential data input
21 RXIN3+ I + LVDS differential data input
22 GND P Ground
23 NC --- No connection
