CHIMEI INNO L U X DISPLAY CORPORATION
LCD MODULE
SPECIFICATION
Customer:钟表的英语
Model Name: AT043TN25 V.2
SPEC NO.: A043-25-TT-21
Date: 2010/05/14
Version: 01
■Preliminary Specification
□Final Specification
For Customer’s Acceptance
Approved by Comment
Approved by Reviewed by Prepared by
Joe Lin
2010/05/27
James Yu
Charlie Chou
2010/05/27
David Lee
2010/05/25
The copyright belongs to InnoLux. Any unauthorized u is prohibited.
CHIMEI INNO L U X
InnoLux copyright 2004
All rights rerved,
Copying forbidden.
Record of Revision
Version Revi Date Page Content Pre-spec .01 2010/05/14 Initial Relea.
The copyright belongs to CHIMEI InnoLux. Any unauthorized u is prohibited.
CHIMEI INNO L U X
Contents
1. General Specifications (1)
2. Pin Assignment (2)
2.1. T FT LCD Panel Driving Section (2)
3. Operation Specifications (4)
3.1. A bsolute Maximum Ratings (4)
3.2. T ypical operation conditions (5)
3.3 Backlight Driving Conditions (5)
3.4. P ower Sequence (6)
3.5. T iming Characteristics (7)
3.5.1. Timing Conditions (7)
3.5.2.Timing Diagram (8)
4. Optical Specifications ................................................................................. (9)
5. Reliability Test Items (13)
6. General Precautions (14)
7.1. Safety (14)
7.2. Handling (14)
7.3. Static Electricity (14)
7.4. Storage (14)
7.5. Cleaning (14)
作文十年后的我7. Mechanical Drawing (15)
9. Package Drawing (16)
9.1. Packaging Material Table (16)
9.2. Packaging Quantity (16)
9.3. Packaging Drawing (17)
贵州财经大学研究生院The copyright belongs to InnoLux. Any unauthorized u is prohibited.
分组分解法1. General Specifications
No. Item Specification Remark
1 LCD size 4.3 inch(Diagonal)
2 Driver element a-Si TFT active matrix
3 Resolution 480 × 3 (RGB) × 272
4 Display mode Normally White, Transmissive
5 Dot pitch 0.066(W) × 0.198(H) mm
6 Active area 95.04(W) × 53.856(H) mm什么地转动
7 Module size 105.5(W) × 67.2(H) ×2.9(D) mm Note 1
8 Surface treatment Anti-Glare
9 Color arrangement RGB-stripe
10 Interface Digital
11 Backlight Power consumption TBD W(Typ.)
12 Panel Power consumption TBD W (Typ.)
13 Weight TBD (Typ.)
Note 1: Refer to Mechanical Drawing.
2. Pin Assignment
2.1. T FT LCD Panel Driving Section
FPC Connector is ud for the module electronics interface. The recommended model is “FH19SC-40S-0.5SH” manufactured by HIROSE.
Pin No. Symbol I/O Function Remark
1 V LED-P Power for LED backlight cathode
2 V LED+P Power for LED backlight anode
3 GND P Power ground
4 V DD P Power voltage
5 R0 I Red data (LSB)
6 R1 I Red data
7 R2 I Red data
8 R3 I Red data
9 R4 I Red data丽斑麻蜥
10 R5 I Red data
11 R6 I Red data
12 R7 I Red data (MSB)公布栏
13 G0 I Green data (LSB)
14 G1 I Green data
15 G2 I Green data
16 G3 I Green data
17 G4 I Green data
南极英语
18 G5 I Green data
19 G6 I Green data
20 G7 I Green data (MSB)
