AN ISO9002 / QS9000 REGISTERED COMPANY
SPECIFICATION LISTING
THE FOLLOWING IS A PARTIAL LISTING OF THE SPECIFICATIONS THAT MARSH PLATING CORPORATION AND/OR FINISHING SERVICES INC. ARE CAPABLE OF PROCESSING TO. IF YOU REQUIRE
A FINISH THAT IS NOT LISTED, PLEASE CONTACT THE ESTIMATING DEPARTMENT AT MARSH PLATING ((734) 483-5767) FOR MORE UP TO DATE INFORMATION ON OUR CAPABILITIES.
SALT SPRAY ORGANIZATION SPEC.DESCRIPTION THICK.COLOR WHITE RED ASTM B545ELECTRODEPOSITED COATINGS OF TIN
CLASS A MILD SERVICE CONDITIONS WHERE THE SIGNIFICANT SURFACE IS SHIELDED.00010"SILVER N/A
CLASS B MILD SERVICE CONDITIONS .00020"SILVER N/A
CLASS C MODERATE EXPOSURE CONDITIONS, USUALLY INDOORS.00032"SILVER N/A
CLASS D SEVERE SERVICE, INCLUDING EXPOSURE TO DAMPNESS AND MILD CORROSION.00060"SILVER N/A
CLASS E VERY SEVERE SERVICE CONDITIONS, INCLUDING ELEVATED TEMPERATURES.00120"SILVER N/A
CLASS F SIMILAR TO CLASS A, BUT FOR SHORTER TERM CONTACT APPLICATIONS.00006"SILVER N/A
ASTM B633ELECTRODEPOSITED COATINGS OF ZINC ON IRON AND STEEL
SC 1MILD.00020"
SC 2MODERATE.00032"
SC 3SEVERE.00050"
SC 4VERY SEVERE.00100"
TYPE I AS PLATED WITHOUT SUPPLEMENTARY TREATMENT SILVER
TYPE II WITH COLORED CHROMATE CONVERSION COATINGS YELLOW*96
TYPE III WITH COLORLESS CHROMATE CONVERTION COATINGS SILVER12
TYPE IV WITH PHOSPHATE CONVERSION COATING GRAY
ASTM B689ELECTROPLATED ENGINEERING NICKEL COATINGS
CLASS 5THICKNESS 5 MICROMETERS.00020"SILVER
CLASS 25THICKNESS 25 MICROMETERS.00100"SILVER
CLASS 50THICKNESS 50 MICROMETERS.00200"SILVER
CLASS 100THICKNESS 100 MICROMETERS.00400"SILVER
CLASS 200THICKNESS 200 MICROMETERS.00800"SILVER
X THICKNESS AS SPECIFIED TBD SILVER
TYPE 1NICKEL ELECTROPLATED FROM SOLUTIONS NOT CONTAINING HARDENERS, BRIGHTENERS OR STRESS CONT.SILVER
TYPE 2NICKEL ELECTRODEPOSITS USED AT MODERATE TEMPERATURES CONTAINING COMPOUNDS THAT INCREAS.SILVER
TYPE 3NICKEL ELECTRODEPOSITS USED AT ELEVATED TEMPERATURES CONTAING COMPOUNDS THAT INCREASE H.SILVER
AN ISO9002 / QS9000 REGISTERED COMPANY
SPECIFICATION LISTING
THE FOLLOWING IS A PARTIAL LISTING OF THE SPECIFICATIONS THAT MARSH PLATING CORPORATION AND/OR FINISHING SERVICES INC. ARE CAPABLE OF PROCESSING TO. IF YOU REQUIRE
A FINISH THAT IS NOT LISTED, PLEASE CONTACT THE ESTIMATING DEPARTMENT AT MARSH PLATING ((734) 483-5767) FOR MORE UP TO DATE INFORMATION ON OUR CAPABILITIES.
SALT SPRAY ORGANIZATION SPEC.DESCRIPTION THICK.COLOR WHITE RED ASTM B733AUTOCATALYTIC (ELECTROLESS) NICKEL-PHOSHOROUS COATINGS ON METAL
SC 0MINIMUM THICKNESS.000004"SILVER
SC 1LIGHT SERVICE.00020"SILVER
SC 2MILD SERVICE.00050"SILVER
SC 3MODERATE SERVICE.00100"SILVER
SC 4SEVERE SERVICE.00300"SILVER
TYPE I NO REQUIREMENT FOR PHOSPHORUS SILVER
TYPE II 1 - 3% PHOSPHORUS SILVER
TYPE III 2 - 4% PHOSPHORUS SILVER
TYPE IV 5 - 8% PHOSPHORUS SILVER
TYPE V10% - PHOSPHORUS SILVER
ASTM B734ELECTRODEPOSITED COPPER FOR ENGINEERING USES
CLASS 5THICKNESS 5 MICROMETERS.00020"COPPER
CLASS 12THICKNESS 12 MICROMETERS.00050"COPPER
CLASS 20THICKNESS 20 MICROMETERS.00080"COPPER
CLASS 25THICKNESS 25 MICROMETERS.00100"COPPER
CLASS X THICKNESS AS SPECIFIED TBD COPPER
ASTM B840ELECTRODEPOSITED COATINGS OF ZINC COBALT ALLOY DEPOSITS
GRADE 6THICKENSS 6 MICROMETERS.00025"
GRADE 12THICKNESS 12 MICROMETERS.00050"
GRADE 18THICKNESS 18 MICROMETERS.00075"
TYPE A WITH COLORLESS CHROMATE CONVERSION COATINGS SILVER
TYPE B WITH YELLOW CHROMATE CONVERTION COATING YELLOW
TYPE C WITH BRONZE CHROMATE CONVERSION COATING BRONZE
TYPE D WITH BLACK CHROMATE CONVERSION COATING BLACK
TYPE E ANY OF THE ABOVE TYPES PLUS ORGANIC TOPCOAT TBD
ASTM B841ELECTRODEPOSITED COATINGS OF ZINC NICKEL ALLOY DEPOSITS
CLASS 1DEPOSITS HAVING 5 - 12% NICKEL, THE BALANCE BEING ZINC
GRADE 5THICKNESS 5 MICROMETERS.00020"
GRADE 8THICKNESS 8 MICROMETERS.00032"
GRADE 10THICKNESS 10 MICROMETERS.00040"
TYPE A WITH COLORLESS CHROMATE CONVERSION COATINGS SILVER
TYPE B WITH YELLOW CHROMATE CONVERTION COATING YELLOW
TYPE C WITH BRONZE CHROMATE CONVERSION COATING BRONZE
TYPE D WITH BLACK CHROMATE CONVERSION COATING BLACK
TYPE E ANY OF THE ABOVE TYPES PLUS ORGANIC TOPCOAT TBD
AN ISO9002 / QS9000 REGISTERED COMPANY
SPECIFICATION LISTING
THE FOLLOWING IS A PARTIAL LISTING OF THE SPECIFICATIONS THAT MARSH PLATING CORPORATION AND/OR FINISHING SERVICES INC. ARE CAPABLE OF PROCESSING TO. IF YOU REQUIRE
A FINISH THAT IS NOT LISTED, PLEASE CONTACT THE ESTIMATING DEPARTMENT AT MARSH PLATING ((734) 483-5767) FOR MORE UP TO DATE INFORMATION ON OUR CAPABILITIES.
SALT SPRAY ORGANIZATION SPEC.DESCRIPTION THICK.COLOR WHITE RED ASTM B842ELECTRODEPOSITED COATINGS OF ZINC IRON ALLOY DEPOSITS
CLASS 1DEPOSITS HAVING APPROXIMATELY 99% ZINC MASS, BALANCE IRON
GRADE 6THICKNESS 6 MICROMETERS.00025"
GRADE 12THICKNESS 12 MICROMETERS.00050"
GRADE 18THICKNESS 18 MICROMETERS.00075"
TYPE A ZINC IRON WITH BLACK CHROMATE CONVERSION COATING BLACK
TYPE B ZINC IRON WITH IRIDESCENT YELLOW CHROMATE CONVERSION COATING YELLOW
ASTM B850POST COATING TREATMENTS OF STEEL FOR REDUCING THE RISK OF HYDROGEN EMBRITTLEMENT
DELPHI DX150100CORROSION PROTECTIVE COATINGS - ZINC ALLOY PLATING
DX150101ZINC COBALT YELLOW240 DX150102ZINC COBALT CLEAR96 DX150103ZINC COBALT BLACK240 DX150104ZINC NICKEL YELLOW500 DX150105ZINC NICKEL CLEAR240 DX150106ZINC IRON BLACK288 DX150107ZINC IRON YELLOW288 DX150108TIN ZINC YELLOW N/A DELPHI DX551200CORROSION PROTECTIVE COATINGS - HEXAVALENT CHROMIUM FREE ZINC PLATING
DX5512013U24/0.0001"N/A N/A24 DX5512026U48/0.0002"N/A N/A48 DX5512039U72/0.00035"N/A N/A72 DX55120412U96/0.0005"N/A N/A96 DX5512058K96/24.0003"CLEAR2496 DX55120615K240/24.0006"CLEAR24240 DX5512078K240/96G.0003"CLEAR96240 DX5512088K360/120G.0003"CLEAR120360 DX5512098K480/240G.0003"CLEAR240480 DX5512108K72/48.0003"CLEAR4872 DX5512118K240/120T.0003"CLEAR120240 DX5512129K168/120G.00035"CLEAR120168 DX55121312K240/120G.0005"CLEAR120240 DX5512148K500/96GW.0003"CLEAR96500 DX5512159K120/48G.00035"CLEAR48120 DX5512169D168/120G.00035"YELLOW120168 DX5512179K168/120G.00035"CLEAR120168 DX55121812K240/120 .0005"CLEAR120240 DX5512198K72/24.0003"CLEAR2472 DX5512208K96/48.0003"CLEAR4896
AN ISO9002 / QS9000 REGISTERED COMPANY
SPECIFICATION LISTING
THE FOLLOWING IS A PARTIAL LISTING OF THE SPECIFICATIONS THAT MARSH PLATING CORPORATION AND/OR FINISHING SERVICES INC. ARE CAPABLE OF PROCESSING TO. IF YOU REQUIRE
A FINISH THAT IS NOT LISTED, PLEASE CONTACT THE ESTIMATING DEPARTMENT AT MARSH PLATING ((734) 483-5767) FOR MORE UP TO DATE INFORMATION ON OUR CAPABILITIES.
SALT SPRAY ORGANIZATION SPEC.DESCRIPTION THICK.COLOR WHITE RED DX5512213K32/8.0001"CLEAR832 DX5512223K24/8.0001"CLEAR824 DELPHI DX551300CORROSION PROTECTIVE COATINGS - ZINC ALLOY PLATING (HEXAVALENT CHROMIUM FREE)
DX551301ZINC COBALT CLEAR500 DX551302ZINC IRON CLEAR600 DX551303ZINC NICKEL CLEAR600 DX551304ZINC IRON COBALT CLEAR500 DX551305ZINC IRON BLACK500 FORD ESB-M1P1-A PLATING, CADMIUM AND ZINC
CLASS A VERY SEVERE, EXTERIOR.00050"*0144 CLASS B SEVERE, EXTERIOR.00050"096 CLASS C MODERATE, EXTERIOR OR INTERIOR.00035"048 CLASS D LIGHT, INTERIOR.00015"024 CLASS 1GREEN TO OLIVE DRAB / HEAVY CHROMATE PLUS BLACK DYE / DOUBLE DIP CLEAR GREEN96NA CLASS 2YELLOW CHROMATE / BLACKENING SALT AND OIL DIP YELLOW48NA CLASS 3LIGHT YELLOW CHROMATE / SINGLE DIP CLEAR CLEAR24NA
AN ISO9002 / QS9000 REGISTERED COMPANY
SPECIFICATION LISTING
THE FOLLOWING IS A PARTIAL LISTING OF THE SPECIFICATIONS THAT MARSH PLATING CORPORATION AND/OR FINISHING SERVICES INC. ARE CAPABLE OF PROCESSING TO. IF YOU REQUIRE
A FINISH THAT IS NOT LISTED, PLEASE CONTACT THE ESTIMATING DEPARTMENT AT MARSH PLATING ((734) 483-5767) FOR MORE UP TO DATE INFORMATION ON OUR CAPABILITIES.
SALT SPRAY ORGANIZATION SPEC.DESCRIPTION THICK.COLOR WHITE RED FORD ESE-M1P2-A PLATING, COPPER.00015"COPPER NA8
FORD ESF-M1P3-A PLATING, CADMIUM AND ZINC (SEVERE).00050"SILVER096 YELLOW.00050"YELLOW96NA CLEAR / BLACK.00050"TBD48NA
FORD ESF-M1P4-A PLATING, CADMIUM AND ZINC (MODERATE).00035"SILVER048 YELLOW.00035"YELLOW48NA CLEAR / BLACK.00035"TBD48NA FORD ESF-M1P5-A PLATING,
CADMIUM AND ZINC (LIGHT).00015"SILVER024 YELLOW.00015"YELLOW24NA CLEAR / BLACK.00015"TBD24NA
FORD ESF-M1P6-A PLATING, CADMIUM AND ZINC (LIGHT).00020"SILVER032 YELLOW.00020"YELLOW32NA CLEAR / BLACK.00020"TBD32NA WSB-M1P9-B PLATING, TIN HOT DIP OVER FERROUS, COPPER OR COPPER ALLOY.00001"SILVER
FORD WSB-M1P10-B PLATING, TIN ELECTRODEPOSITED ON FERROUS, COPPER OR COPPER ALLOY.00001"SILVER
FORD WSB-M1P11-B PLATING, TIN ELECTRODEPOSITED ON FERROUS, COPPER OR COPPER ALLOY.0004"SILVER
FORD ESF-M1P30-A PLATING, COPPER
CLASS 1IDENTIFICATION.00010"COPPER
CLASS 2DRAWING (LUBRICANT).00020"COPPER
CLASS 3ELECTRICAL CONTACT AND WEAR RUN-IN.00030"COPPER
CLASS 4SALT BATH AND PACK CARBURIZING.00090"COPPER
CLASS 5GAS CARBURIZING
FORD ESF-M1P41-A PLATING, ZINC, SUPPLIMENTARY CHROMATE TREATMENT.00020"YELLOW50
FORD ESS-M1P45-A PLATING, ZINC AND CHROMATE (S36).0002"YELLOW72
FORD WSD-M1P65-B1PLATING, ELECTROLESS NICKEL, HEAT TREATED.00040"SILVER NA24
FORD WSD-M1P65-B2PLATING, ELECTROLESS NICKEL, AS DEPOSITED.00040"SILVER NA NA
FORD WSD-M1P85-A1PLATING, ZINC OVER FERROUS SURFACES.00020"SILVER NA24
FORD WSD-M1P85-A2PLATING, ZINC OVER FERROUS SURFACES.00032"SILVER NA48
