Cisco与Brocade光纤交换机级联配置文档
Cisco 9120交换机
用户名：admin
密码：bsczzf912o(o为字母o)
1.配置异构交换机平台协同工作模式
Cisco 9120配置过程
激活前8个端口
switch# config t
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#interface fc1/1-8
switch(config-if)# no shutdownswitch(config-if)# end
配置交换机协同工作模式
switch# config t
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# vsan databa
switch(config-vsan-db)# vsan 1 interop
switch(config-vsan-db)# end
配置domain ID
switch# config t
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# fcdomain domain 100 preferred vsan 1
switch(config)# end
激活VSAN
switch# config t
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# vsan databa
switch(config-vsan-db)# vsan 1 suspend
switch(config-vsan-db)# no vsan 1 suspend
switch(config-vsan-db)# end
察看修改之后的系统配置信息
switch# show running
version 2.0(2b)
vsan databa
vsan 1 interop 1
fcdomain domain 100 preferred vsan 1
fcdomain fcid persistent vsan 1
boot kickstart bootflash:/m9100-s1ek9-kickstart-mz.2.0.2b.bin
boot system bootflash:/m9100-s1ek9-mz.2.0.2b.bin
kernel core target 0.0.0.0
kernel core limit 1
snmp-rver ur admin network-admin auth md5 0xeec64ba2afbe9b65e13b23882ac6ae05
priv 0xeec64ba2afbe9b65e13b23882ac6ae05 localizedkey
urname admin password 5 $1$V3smTQpb$MTvub69DkVBxdCt9BsEDB1 role network-
admin
callhome
switch-priority 7
snmp-rver enable traps licen
interface mgmt0
ip address 192.168.70.139 255.255.255.0
interface fc1/1
no shutdown
interface fc1/2
no shutdown
interface fc1/3
no shutdown
interface fc1/4
no shutdown
interface fc1/5
no shutdown
interface fc1/6
no shutdown
interface fc1/7
no shutdown
interface fc1/8
no shutdown
interface fc1/9
interface fc1/10
interface fc1/11
interface fc1/12
interface fc1/13
interface fc1/14
interface fc1/15
interface fc1/16
interface fc1/17
interface fc1/18
interface fc1/19
interface fc1/20
switch#
察看端口连接状态信息
switch# show interface brief
-------------------------------------------------------------------------------
Interface Vsan Admin Admin Status FCOT Oper Oper Port
Mode Trunk Mode Speed Channel
Mode (Gbps)
-------------------------------------------------------------------------------
fc1/1 1 auto on up swl F 2 --
fc1/2 1 auto on up swl F 2 --
fc1/3 1 auto on up swl E 2 --
fc1/4 1 auto on notConnected swl -- --
fc1/5 1 FX -- notConnected swl -- --
fc1/6 1 FX -- notConnected swl -- --
fc1/7 1 FX -- notConnected swl -- --
fc1/8 1 FX -- notConnected swl -- --
fc1/9 1 FX -- sfpAbnt -- -- --
fc1/10 1 FX -- sfpAbnt -- -- --
fc1/11 1 FX -- sfpAbnt -- -- --
fc1/12 1 FX -- sfpAbnt -- -- --
fc1/13 1 FX -- sfpAbnt -- -- --
fc1/14 1 FX -- sfpAbnt -- -- --
fc1/15 1 FX -- sfpAbnt -- -- --
fc1/16 1 FX -- sfpAbnt -- -- --
fc1/18 1 FX -- sfpAbnt -- -- --
fc1/19 1 FX -- sfpAbnt -- -- --
fc1/20 1 FX -- sfpAbnt -- -- --
刀片中心光纤交换机模块配置(brocade)
禁止交换机
brocadessm:USERID> switchdisable
修改Domain ID
brocadessm:USERID> configure
Fabric parameters (yes, y, no, n): [no] yes
Domain: (1..239) [1] 99
R_A_TOV: (4000..120000) [10000]
E_D_TOV: (1000..5000) [2000]
WAN_TOV: (0..30000) [0]
MAX_HOPS: (7..19) [7]
Data field size: (256..2112) [2112]
Sequence Level Switching: (0..1) [0]
Disable Device Probing: (0..1) [0]
Suppress Class F Traffic: (0..1) [0]
Switch PID Format: (1..2) [1]
Per-frame Route Priority: (0..1) [0]
