port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/5
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/6
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/7
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/8
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/9
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/10
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/11
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/12
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/13
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/14
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/15
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/16
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/17
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/18
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/19
port isolate
line-rate inbound 6144
line-rate outbound 6144
#
interface Ethernet1/0/20
port isolate
line-rate inbound 6144
line-rate outbound 6144
#
interface Ethernet1/0/21
port isolate
line-rate inbound 10240
line-rate outbound 10240
#
interface Ethernet1/0/22
port isolate
line-rate inbound 10240
line-rate outbound 10240
#
interface Ethernet1/0/23
port isolate
#
interface Ethernet1/0/24
#
interface NULL0
#
management-vlan 9
#
snmp-agent
snmp-agent local-engineid 800007DB000FE2420BCB6877
snmp-agent community read public
snmp-agent sys-info version v3
#
ur-interface aux 0
ur-interface vty 0 4
authentication-mode scheme
#
return
[Quidway]undo inter vlan
[Quidway]undo inter Vlan-interface 1
^
% Wrong parameter found at '^' position.
[Quidway]undo inter Vlan-interface 9
[Quidway]man
[Quidway]management-vlan 1
[Quidway]inter lvan
[Quidway]inter vlan
[Quidway]inter Vlan-interface 1
[Quidway-Vlan-interface1]
%May 13 03:01:57:638 2000 Quidway L2INF/5/VLANIF LINK STATUS CHANGE:- 1 -
Vlan-interface1: is UP
[Quidway-Vlan-interface1]
[Quidway-Vlan-interface1]
[Quidway-Vlan-interface1]ip add 172.16.195.202 255.255.255.0
[Quidway-Vlan-interface1]
#May 13 03:02:11:582 2000 Quidway IFNET/5/TRAP:- 1 -1.3.6.1.6.3.1.1.5.4Interface
31 is Up
%May 13 03:02:11:684 2000 Quidway IFNET/5/UPDOWN:- 1 -Line protocol on the inter
face Vlan-interface1 is UP
[Quidway-Vlan-interface1]
[Quidway-Vlan-interface1]
[Quidway-Vlan-interface1]
[Quidway-Vlan-interface1]
[Quidway-Vlan-interface1]
[Quidway-Vlan-interface1]
[Quidway-Vlan-interface1]
<Quidway>save
The configuration will be written to the device.
Are you sure?[Y/N]
Before pressing ENTER you must choo 'YES' or 'NO'[Y/N]:
Before pressing ENTER you must choo 'YES' or 'NO'[Y/N]:
Before pressing ENTER you must choo 'YES' or 'NO'[Y/N]:
Before pressing ENTER you must choo 'YES' or 'NO'[Y/N]:y
Plea input the file name(*.cfg)(To leave the existing filename
unchanged press the enter key):
Now saving current configuration to the device.
Saving configuration.
..........
Unit1 save configuration flash:/vrpcfg.cfg successfully
<Quidway>
%May 13 03:02:40:334 2000 Quidway CFM/3/CFM_LOG:- 1 -Unit1 save configuration su
ccessfully.
<Quidway>
<Quidway>
<Quidway>dis cu
#
sysname Quidway
#
super password level 3 cipher .]@USE=B,53Q=^Q`MAF4<1!!
#
radius scheme system
#
domain system
#
vlan 1
#
vlan 9
#
interface Vlan-interface1
ip address 172.16.195.202 255.255.255.0
#
interface Aux1/0/0
#
interface Ethernet1/0/1
port isolate
line-rate inbound 2048
line-rate outbound 2048
#
interface Ethernet1/0/2
port isolate
line-rate inbound 2048
line-rate outbound 2048
#
interface Ethernet1/0/3
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/4
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/5
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/6
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/7
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/8
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/9
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/10
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/11
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/12
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/13
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/14
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/15
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/16
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/17
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/18
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/19
port isolate
line-rate inbound 6144
line-rate outbound 6144
#
interface Ethernet1/0/20
port isolate
line-rate inbound 6144
line-rate outbound 6144
#
interface Ethernet1/0/21
port isolate
line-rate inbo
und 10240
line-rate outbound 10240
#
interface Ethernet1/0/22
port isolate
line-rate inbound 10240
line-rate outbound 10240
#
interface Ethernet1/0/23
port isolate
#
interface Ethernet1/0/24
#
interface NULL0
#
snmp-agent
snmp-agent local-engineid 800007DB000FE2420BCB6877
snmp-agent community read public
snmp-agent sys-info version v3
#
ur-interface aux 0
ur-interface vty 0 4
authentication-mode scheme
#
return
<Quidway>sys
System View: return to Ur View with Ctrl+Z.
[Quidway]
[Quidway]snma
[Quidway]snmp
[Quidway]snmp-agent ?
community Set a community for the access of SNMPv1&SNMPv2c
group Set a SNMP group bad on USM
local-engineid Set the engineID of local SNMP entity
mib-view Set SNMP MIB view information
packet Set SNMP packet's parameters
sys-info Set system information of the node
target-host Set the target hosts to receive SNMP notification/traps
trap Set the parameters of SNMP trap/notification
usm-ur Set a new ur for access to SNMP entity
<cr>
[Quidway]snmp-agent com
[Quidway]snmp-agent community ?
read Read-only access for this community string
write Read-write access for this community string
[Quidway]snmp-agent community write
[Quidway]snmp-agent community write huawei
[Quidway]
[Quidway]
[Quidway]
[Quidway]
[Quidway]
[Quidway]dis cu
#
sysname Quidway
#
super password level 3 cipher .]@USE=B,53Q=^Q`MAF4<1!!
#
radius scheme system
#
domain system
#
vlan 1
#
vlan 9
#
interface Vlan-interface1
ip address 172.16.195.202 255.255.255.0
#
interface Aux1/0/0
#
interface Ethernet1/0/1
port isolate
line-rate inbound 2048
line-rate outbound 2048
#
interface Ethernet1/0/2
port isolate
line-rate inbound 2048
line-rate outbound 2048
#
interface Ethernet1/0/3
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/4
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/5
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/6
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/7
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/8
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/9
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/10
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/11
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/12
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/13
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/14
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
in
terface Ethernet1/0/15
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/16
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/17
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/18
port isolate
line-rate inbound 4096
line-rate outbound 4096
#
interface Ethernet1/0/19
port isolate
line-rate inbound 6144
line-rate outbound 6144
#
interface Ethernet1/0/20
port isolate
line-rate inbound 6144
line-rate outbound 6144
#
interface Ethernet1/0/21
port isolate
line-rate inbound 10240
line-rate outbound 10240
#
interface Ethernet1/0/22
port isolate
line-rate inbound 10240
line-rate outbound 10240
#
interface Ethernet1/0/23
port isolate
#
interface Ethernet1/0/24
#
interface NULL0
#
snmp-agent
snmp-agent local-engineid 800007DB000FE2420BCB6877
snmp-agent community write huawei
snmp-agent community read public
snmp-agent sys-info version v3
#
ur-interface aux 0
ur-interface vty 0 4
authentication-mode scheme
#
return
[Quidway]snma
[Quidway]snmp
[Quidway]snmp-agent sys
[Quidway]snmp-agent sys-info in
[Quidway]snmp-agent sys-info ver
[Quidway]snmp-agent sys-info version ?
all Enable the device to support SNMPv1, SNMPv2c and SNMPv3
v1 Enable the device to support SNMPv1
v2c Enable the device to support SNMPv2c
v3 Enable the device to support SNMPv3
[Quidway]snmp-agent sys-info version all
[Quidway]
[Quidway]
[Quidway]
[Quidway]
[Quidway]
[Quidway]
[Quidway]
[Quidway]save
The configuration will be written to the device.
Are you sure?[Y/N]
Before pressing ENTER you must choo 'YES' or 'NO'[Y/N]:
Before pressing ENTER you must choo 'YES' or 'NO'[Y/N]:
Before pressing ENTER you must choo 'YES' or 'NO'[Y/N]:
Before pressing ENTER you must choo 'YES' or 'NO'[Y/N]:y
Plea input the file name(*.cfg)(To leave the existing filename
unchanged press the enter key):
Now saving current configuration to the device.
Saving configuration.
..........
Unit1 save configuration flash:/vrpcfg.cfg successfully
[Quidway]
%May 13 03:06:37:916 2000 Quidway CFM/3/CFM_LOG:- 1 -Unit1 save configuration su
ccessfully.
[Quidway]
[Quidway]
[Quidway]
[Quidway]
