INC
Copyrighｃ2006 by Nikon Corporation. All Rights Rerved.
INC
JAA79651-R.3695.A Specifications
Type of lens: G-type AF-S DX Zoom-Nikkor lens with built-in CPU and Nikon bayonet mount (Specially designed for u with Nikon digital SLR – Nikon DX format cameras) Focal length: 18mm – 135mm
Maximum aperture: f/3.5 - 5.6
Lens construction: 15 elements in 13 groups (1 ED and 2 aspherical lens elements)
Picture angle: 76° – 12°
Focal length scale: 18, 24, 35, 50, 70, 105, 135mm
Distance information: Output to camera body
Zoom control: Manually via parate zoom ring
Focusing: Nikon Internal Focusing (IF) system (utilizing an internal Silent Wave Motor);
manually via parate focus ring
Clost focus distance: 0.45m (1.5 ft.) at all zoom ttings
No. of diaphragm blades: 7 pcs. (rounded)
Diaphragm: Fully automatic
Aperture range: f/3.5 to f/22 (at 18mm), f/5.6 to f/38 (at 135mm)
Exposure measurement: Via full-aperture method
Attachment size: 67mm (P = 0.75mm)
Dimensions: Approx. 73.5mm dia. x 86.5mm extension from the camera’s lens-mount flange Weight: Approx. 385g (13.6 oz)
Specifications and designs are subject to change without any notice or obligation on the part of the manufacturer.
※ Before Disasmbly / (Re)asmbly / Adjustment
For this lens, when the 5th lens group housing unit is removed, the lens-aligning work becomes necessary after reasmbling.
Therefore, at rvice facilities where this alignment work cannot be performed, do NOT remove the 5th lens group housing unit.
Caution:
① When disasmbling, make sure to memorize the processing state of wires, screws to be fixed and their types, etc.
②Becau prototypes are ud for "Disasmbly/(Re)asmbly/Adjustment", they may differ from the actual
products in forms, etc.
③ Becau pictures are procesd by a special method, they may differ from the actual ones in texture.
Points to notice for Lead-free solder products
・Lead-free solder is ud for this product.
・For soldering work, the special solder and soldering iron are required.
・Do NOT mix up lead-free solder with traditional solder.
・U the special soldering iron respectively for lead-free solder and lead solder.
They cannot be ud in common.
★ New tool
Front cover sheet1st lens-G unit Washer
cover sheet Sheet
★Remove by using [J11332].
2nd lens-G retaining ring
G4 lens
G5 lens
2nd lens-G housing unit
★Remove by using [J11335].
★Remove by using [J11336].
Washer
1. Disasmbly 1st lens group unit
2nd lens group housing unit
Zoom rubber
Zoom rubber
Sheet
Tape (#132×2)
Rear cover ring
#107×3
